Manufacturer: Bently Nevada
Product No.: 330103-02-10-05-02-05
Country of origin:United States
Product Type: 3300 XL 8 mm Proximity Probe
Barcode: 8537101190
Payment: T/T, Western Union
Weight: 140g
Dimensions: 45 mm x 95 mm x 95 mm (H x W x D)
Shipping port: Xiamen
Warranty: 12 months
The 330103-02-10-05-02-05 is a 3300 XL 8 mm proximity probe configured with an M10 x 1 thread and designed for non-contact eddy-current displacement measurement. This probe is part of the 3300 XL 8 mm transducer system, serving as a primary component for monitoring critical machinery shaft vibration and axial position. The configuration features a 0.2 in unthreaded length (Option 02), a 1.0 in case length (Option 10), and a 0.5 m system total length (Option 05), utilizing a standard cable with a miniature ClickLoc connector (Option 02). This unit is approved for use in hazardous areas including CSA, ATEX, and IECEx environments (Option 05).
This probe is intended for integration into 3300 XL monitoring chains, which include a compatible 3300 XL Proximitor sensor and extension cable. The M10 x 1 threaded body allows for precise mounting in machine cases. The system provides consistent, linear output for accurate position and vibration data, essential for protecting rotating equipment such as steam and gas turbines, compressors, and pumps.
| Option | Code on This SKU | Description |
|---|---|---|
| Orderable Part Number | 330103-02-10-05-02-05 | 3300 XL 8 mm Proximity Probe, M10 x 1 |
| A - Unthreaded Length | 02 | 0.2 in unthreaded length |
| B - Case Length | 10 | 1.0 in total case length |
| C - Total Length | 05 | 0.5 m system total length |
| D - Connector/Cable | 02 | Miniature ClickLoc connector, standard cable |
| E - Agency Approval | 05 | CSA, ATEX, IECEx Approvals |
| Manufacturer | Bently Nevada (Baker Hughes) |
| Part Number | 330103-02-10-05-02-05 |
| Probe Diameter | 8 mm |
| Thread Size | M10 x 1 |
| Unthreaded Length | 0.2 in |
| Case Length | 1.0 in |
| Total System Length | 0.5 m |
| Connector Type | Miniature ClickLoc |
| Cable Type | Standard (non-armored) |
| Agency Approvals | CSA, ATEX, IECEx |
This product meets requirements for CSA, ATEX, and IECEx hazardous area certifications. Ensure all installation adheres to local electrical codes and Bently Nevada safety documentation for explosive atmospheres.
Global Express Shipping
Returns & Warranty
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
Check 1771-IG TTL HIGH/LOW logic thresholds, field supply ripple and 1771-WC wiring before replacing an input module.
A field checklist for distinguishing Danfoss 060G2105, 060G1323 and 060G2109 by pressure range, fitting, loop signal and controller scaling.
A field checklist for separating 24 VDC input, carrier bus, output derating and alarm-contact faults before replacing an Emerson SE5009.
A controlled commissioning method for using the 140XSM00200 simulator to verify Modicon Quantum input mapping and interlocks before reconnecting field wiring.
A commissioning checklist for the ProSoft PLX32-EIP-MBTCP covering subnet separation, register contracts, EtherNet/IP timing, failure tests and replacement records.
A field checklist for IC693MDL916 relay commands, terminal blocks, load current, switching rate and contact-side measurements.
