Bently Nevada 330103-05-13-10-02-00 3300 XL 8 mm Proximity Probe

Description

330103-05-13-10-02-00: 3300 XL 8 mm proximity probe configuration featuring 0.5 in unthreaded length (Option 05), 1.3 in case length (Option 13), and 1.0 m total length (Option 10). This non-contact eddy-current transducer is designed for use in 3300 XL 8 mm monitoring chains to measure shaft vibration and axial position on critical rotating machinery.

This probe utilizes a standard miniature coaxial ClickLoc connector (Option 02) and requires no agency approval (Option 00). It is constructed with an M10 x 1 thread without internal armor. The system is engineered for reliable operation in demanding industrial environments, providing accurate gap measurements when paired with a compatible 3300 XL Proximitor sensor and extension cable.

Features

• M10 x 1 thread, unarmored 3300 XL 8 mm probe design
• Option 05: 0.5 in unthreaded length
• Option 13: 1.3 in total case length
• Option 10: 1.0 m total system length
• Option 02: Miniature coaxial ClickLoc connector, standard cable
• Option 00: No agency approval required
• Non-contact measurement for shaft vibration and position

Applications

• Turbine shaft vibration monitoring
• Compressor rotor position measurement
• Critical rotating machinery protection
• Fluid film bearing monitoring

Ordering Information

Technical Specifications

Installation Guidelines

Ensure proper probe gapping according to the 3300 XL monitoring system manual to maintain linearity and measurement accuracy. Verify that the combined length of the probe and extension cable matches the total system length requirement of the Proximitor sensor. Use standard shielding and grounding practices for signal cabling to minimize electrical interference in the installation environment.