Option 02 (20 mm unthreaded length), Option 08 (80 mm case length), and Option 05 (0.5 meter total length) specify this 3300 XL 8 mm proximity probe configuration — 330104-02-08-05-01-00. This metric-threaded sensor features integrated stainless steel armor over the standard coaxial cable and a metric M10 x 1 threaded case layout. The connection interface is terminated with a miniature coaxial ClickLoc connector equipped with a protective sleeve (Option 01). No agency approvals are required for this specific assembly (Option 00).
This configuration differs from unarmored counterparts by introducing a robust metal conduit around the standard coaxial cable. This armor shields the signal path from mechanical pinching, abrasion, and harsh environment stresses typical of heavy machinery casings. The 0.5-meter overall probe length is optimized for applications where short-run direct cabling to a nearby junction box or an extension cable connection is necessary.
This proximity probe is used for shaft vibration, axial position, and speed measurements on rotating machinery. Common industrial installations include steam turbines, gas turbines, centrifugal compressors, and large industrial pumps within power generation, petrochemical, and oil and gas facilities. It interfaces with 3300 XL Proximitor sensors and standard extension cables in a complete transducer chain.
| Option / Segment | Code on This SKU | Meaning from Reference Datasheet |
|---|---|---|
| Orderable Part Number | 330104-02-08-05-01-00 | 3300 XL 8 mm Proximity Probe, M10 x 1 thread, with armor |
| A - Unthreaded Length Option | 02 | 20 mm unthreaded length (ordered in increments of 10 mm) |
| B - Overall Case Length Option | 08 | 80 mm overall case length (ordered in increments of 10 mm) |
| C - Total Length Option | 05 | 0.5 meter (1.6 feet) total length |
| D - Connector and Cable Option | 01 | Miniature coaxial ClickLoc connector with connector protector, standard cable |
| E - Agency Approval Option | 00 | Not required |
| Parameter / Specification | Value / Range |
|---|---|
| Manufacturer | Bently Nevada |
| Part Number / Model | 330104-02-08-05-01-00 |
| System Series | 3300 XL 8 mm Transducer System |
| Thread Size | M10 x 1 (metric) |
| Armor Protection | Integrated stainless steel armor with outer FEP jacket |
| Tip Diameter | 8.0 mm (0.31 in) |
| Unthreaded Length | 20 mm |
| Overall Case Length | 80 mm |
| Total Probe Length | 0.5 meter (1.6 feet) |
| Cable Resistance (Center to Shield) | 7.45 ohms nominal at 0.5 m length |
| Maximum Thread Engagement | 15 mm |
| Operating Temperature (Standard) | -52 degC to +177 degC (-62 degF to +350 degF) |
| Differential Pressure Seal | Up to 7.0 bar (100 psi) between probe tip and case |
| Dimensions | 45 mm x 120 mm x 120 mm (H x W x D) |
| Weight | 0.15 kg |
| Interface Component | Description |
|---|---|
| Probe Tip | 8.0 mm diameter polyphenylene sulfide (PPS) tip housing the sensing coil |
| Cabling Structure | 75 ohm coaxial cable wrapped in flexible stainless steel armor |
| Connector | Miniature gold-plated brass ClickLoc coaxial male connector with integrated protector sleeve |
Maintain proper unthreaded clearance based on the design of the mounting sleeve to ensure at least 20 mm clearance between the unthreaded section and machine inner walls. Hand-tighten the M10 x 1 threads up to the specified limits to prevent thread deformation or binding during installation. Use the pre-installed connector protector to seal the probe-to-extension cable junction against oil, moisture, and debris. Route the armored lead path to avoid sharp bends or contact with internal machine rotating components.
Global Express Shipping
Returns & Warranty
Manufacturer: Bently Nevada
Product No.: 330104-02-08-05-01-00
Country of origin:United States
Product Type: 3300 XL 8 mm Proximity Probe
Barcode: 8537101190
Payment: T/T, Western Union
Weight: 150g
Dimensions: 45 mm x 120 mm x 120 mm (H x W x D)
Shipping port: Xiamen
Warranty: 12 months
Option 02 (20 mm unthreaded length), Option 08 (80 mm case length), and Option 05 (0.5 meter total length) specify this 3300 XL 8 mm proximity probe configuration — 330104-02-08-05-01-00. This metric-threaded sensor features integrated stainless steel armor over the standard coaxial cable and a metric M10 x 1 threaded case layout. The connection interface is terminated with a miniature coaxial ClickLoc connector equipped with a protective sleeve (Option 01). No agency approvals are required for this specific assembly (Option 00).
This configuration differs from unarmored counterparts by introducing a robust metal conduit around the standard coaxial cable. This armor shields the signal path from mechanical pinching, abrasion, and harsh environment stresses typical of heavy machinery casings. The 0.5-meter overall probe length is optimized for applications where short-run direct cabling to a nearby junction box or an extension cable connection is necessary.
This proximity probe is used for shaft vibration, axial position, and speed measurements on rotating machinery. Common industrial installations include steam turbines, gas turbines, centrifugal compressors, and large industrial pumps within power generation, petrochemical, and oil and gas facilities. It interfaces with 3300 XL Proximitor sensors and standard extension cables in a complete transducer chain.
| Option / Segment | Code on This SKU | Meaning from Reference Datasheet |
|---|---|---|
| Orderable Part Number | 330104-02-08-05-01-00 | 3300 XL 8 mm Proximity Probe, M10 x 1 thread, with armor |
| A - Unthreaded Length Option | 02 | 20 mm unthreaded length (ordered in increments of 10 mm) |
| B - Overall Case Length Option | 08 | 80 mm overall case length (ordered in increments of 10 mm) |
| C - Total Length Option | 05 | 0.5 meter (1.6 feet) total length |
| D - Connector and Cable Option | 01 | Miniature coaxial ClickLoc connector with connector protector, standard cable |
| E - Agency Approval Option | 00 | Not required |
| Parameter / Specification | Value / Range |
|---|---|
| Manufacturer | Bently Nevada |
| Part Number / Model | 330104-02-08-05-01-00 |
| System Series | 3300 XL 8 mm Transducer System |
| Thread Size | M10 x 1 (metric) |
| Armor Protection | Integrated stainless steel armor with outer FEP jacket |
| Tip Diameter | 8.0 mm (0.31 in) |
| Unthreaded Length | 20 mm |
| Overall Case Length | 80 mm |
| Total Probe Length | 0.5 meter (1.6 feet) |
| Cable Resistance (Center to Shield) | 7.45 ohms nominal at 0.5 m length |
| Maximum Thread Engagement | 15 mm |
| Operating Temperature (Standard) | -52 degC to +177 degC (-62 degF to +350 degF) |
| Differential Pressure Seal | Up to 7.0 bar (100 psi) between probe tip and case |
| Dimensions | 45 mm x 120 mm x 120 mm (H x W x D) |
| Weight | 0.15 kg |
| Interface Component | Description |
|---|---|
| Probe Tip | 8.0 mm diameter polyphenylene sulfide (PPS) tip housing the sensing coil |
| Cabling Structure | 75 ohm coaxial cable wrapped in flexible stainless steel armor |
| Connector | Miniature gold-plated brass ClickLoc coaxial male connector with integrated protector sleeve |
Maintain proper unthreaded clearance based on the design of the mounting sleeve to ensure at least 20 mm clearance between the unthreaded section and machine inner walls. Hand-tighten the M10 x 1 threads up to the specified limits to prevent thread deformation or binding during installation. Use the pre-installed connector protector to seal the probe-to-extension cable junction against oil, moisture, and debris. Route the armored lead path to avoid sharp bends or contact with internal machine rotating components.
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
Implement a 3-SPST switch XOR light circuit in LogixPro or RSLogix 500 using an internal relay bit. Includes truth tables, boolean equations, and verified.
Integrate Allen-Bradley CompactLogix, Caterpillar ATS, and generators into DeltaV DCS over Modbus RTU. Covers ProSoft MVI69-MCM, Miille DIN266 gateways.
ONS instruction fires but the OTE coil never latches in Studio 5000 because the one-shot is only true for one scan. Use OTL/OTU or seal-in logic instead.
Configure Allen-Bradley Kinetix 5500 servo drives on EtherNet/IP. Covers CIP Sync, IEEE 1588 V2 timing, Stratix selection, DLR topology, and HMI.
A moving-average filter is the sliding-window smoother most instrument engineers drop into DCS and PLC analog paths. Here is how the window works, how N and sample time set lag, and when a...
On Frame 5–9 gas turbines, GE Mark VI and Mark VIe run control as function-block application software. This article maps process, protection, and sequencing functions—and what Toolbox ST access...
