Option 02 (20 mm unthreaded length) and Option 19 (190 mm case length) specify this 3300 XL 8 mm proximity probe configuration — 330104-02-19-10-01-00. This eddy-current probe features M10 x 1 metric threads and an integrated stainless steel armor sleeve to protect the lead cable in challenging mechanical environments. The system delivers a voltage output proportional to the gap between the probe tip and the observed target surface, allowing static and dynamic measurements of shaft position and vibration.
Unlike configurations that omit mechanical protection, the armored casing on this variant guards the coaxial cable from physical abrasion, pinching, and fluid exposure. With a total length of 1.0 meter and standard cable material, it connects to a standard 3300 XL extension cable and Proximitor sensor to form a complete 5-meter or 9-meter transducer loop. This configuration is ordered with a miniature coaxial ClickLoc connector and a pre-installed connector protector (Option 01) but without hazardous area agency approvals (Option 00).
| Option Element | Code on This SKU | Configuration Meaning |
|---|---|---|
| Orderable Part Number | 330104-02-19-10-01-00 | 3300 XL 8 mm Proximity Probe, M10 x 1 thread, with stainless steel armor |
| A - Unthreaded Length | 02 | 20 mm unthreaded length (ordered in increments of 10 mm) |
| B - Overall Case Length | 19 | 190 mm overall case length (ordered in increments of 10 mm) |
| C - Total Length | 10 | 1.0 meter (3.3 feet) total probe length |
| D - Connector & Cable Type | 01 | Miniature coaxial ClickLoc connector with connector protector, standard cable |
| E - Agency Approval | 00 | No agency approvals required |
| Parameter | Specification Value |
|---|---|
| Manufacturer | Bently Nevada (Baker Hughes) |
| Model / Part Number | 330104-02-19-10-01-00 |
| Probe Tip Diameter | 8.0 mm |
| Thread Type | M10 x 1 metric thread |
| Mechanical Protection | Stainless steel armor with FEP outer jacket |
| Unthreaded Length | 20 mm |
| Overall Case Length | 190 mm |
| Total Probe Length | 1.0 meter (3.3 feet) |
| Connector Type | Miniature coaxial ClickLoc (male) |
| Connector Protection | Fluorosilicone connector protector installed |
| Nominal Target Target Material | AISI 4140 steel |
| Nominal Probe DC Resistance | 7.59 ohms plus/minus 0.50 ohms (center to outer conductor) |
| Operating Temperature Range | -52 to +177 degC (-62 to +350 Fahrenheit) |
| Pressure Limit | Differential pressure seal up to 7.0 bar (100 psi) |
| Dimensions | 200 mm x 200 mm x 30 mm (H x W x D) (coiled envelope) |
| Weight | 0.23 kg |
| Connector Component | Interface Type / Function |
|---|---|
| Miniature Male Coaxial Tip | Gold-plated ClickLoc center conductor; transmits RF signal to extension cable |
| Outer Shell | Gold-plated coaxial shield; provides signal return and shielding path |
| Connector Protector | Fluorosilicone environmental seal; prevents ingress of moisture and machine fluids |
Global Express Shipping
Returns & Warranty
Manufacturer: Bently Nevada
Product No.: 330104-02-19-10-01-00
Country of origin:United States
Product Type: 3300 XL 8 mm Proximity Probe
Barcode: 8537101190
Payment: T/T, Western Union
Weight: 230g
Dimensions: 200 mm x 200 mm x 30 mm (H x W x D)
Shipping port: Xiamen
Warranty: 12 months
Option 02 (20 mm unthreaded length) and Option 19 (190 mm case length) specify this 3300 XL 8 mm proximity probe configuration — 330104-02-19-10-01-00. This eddy-current probe features M10 x 1 metric threads and an integrated stainless steel armor sleeve to protect the lead cable in challenging mechanical environments. The system delivers a voltage output proportional to the gap between the probe tip and the observed target surface, allowing static and dynamic measurements of shaft position and vibration.
Unlike configurations that omit mechanical protection, the armored casing on this variant guards the coaxial cable from physical abrasion, pinching, and fluid exposure. With a total length of 1.0 meter and standard cable material, it connects to a standard 3300 XL extension cable and Proximitor sensor to form a complete 5-meter or 9-meter transducer loop. This configuration is ordered with a miniature coaxial ClickLoc connector and a pre-installed connector protector (Option 01) but without hazardous area agency approvals (Option 00).
| Option Element | Code on This SKU | Configuration Meaning |
|---|---|---|
| Orderable Part Number | 330104-02-19-10-01-00 | 3300 XL 8 mm Proximity Probe, M10 x 1 thread, with stainless steel armor |
| A - Unthreaded Length | 02 | 20 mm unthreaded length (ordered in increments of 10 mm) |
| B - Overall Case Length | 19 | 190 mm overall case length (ordered in increments of 10 mm) |
| C - Total Length | 10 | 1.0 meter (3.3 feet) total probe length |
| D - Connector & Cable Type | 01 | Miniature coaxial ClickLoc connector with connector protector, standard cable |
| E - Agency Approval | 00 | No agency approvals required |
| Parameter | Specification Value |
|---|---|
| Manufacturer | Bently Nevada (Baker Hughes) |
| Model / Part Number | 330104-02-19-10-01-00 |
| Probe Tip Diameter | 8.0 mm |
| Thread Type | M10 x 1 metric thread |
| Mechanical Protection | Stainless steel armor with FEP outer jacket |
| Unthreaded Length | 20 mm |
| Overall Case Length | 190 mm |
| Total Probe Length | 1.0 meter (3.3 feet) |
| Connector Type | Miniature coaxial ClickLoc (male) |
| Connector Protection | Fluorosilicone connector protector installed |
| Nominal Target Target Material | AISI 4140 steel |
| Nominal Probe DC Resistance | 7.59 ohms plus/minus 0.50 ohms (center to outer conductor) |
| Operating Temperature Range | -52 to +177 degC (-62 to +350 Fahrenheit) |
| Pressure Limit | Differential pressure seal up to 7.0 bar (100 psi) |
| Dimensions | 200 mm x 200 mm x 30 mm (H x W x D) (coiled envelope) |
| Weight | 0.23 kg |
| Connector Component | Interface Type / Function |
|---|---|
| Miniature Male Coaxial Tip | Gold-plated ClickLoc center conductor; transmits RF signal to extension cable |
| Outer Shell | Gold-plated coaxial shield; provides signal return and shielding path |
| Connector Protector | Fluorosilicone environmental seal; prevents ingress of moisture and machine fluids |
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
Implement a 3-SPST switch XOR light circuit in LogixPro or RSLogix 500 using an internal relay bit. Includes truth tables, boolean equations, and verified.
Integrate Allen-Bradley CompactLogix, Caterpillar ATS, and generators into DeltaV DCS over Modbus RTU. Covers ProSoft MVI69-MCM, Miille DIN266 gateways.
ONS instruction fires but the OTE coil never latches in Studio 5000 because the one-shot is only true for one scan. Use OTL/OTU or seal-in logic instead.
Configure Allen-Bradley Kinetix 5500 servo drives on EtherNet/IP. Covers CIP Sync, IEEE 1588 V2 timing, Stratix selection, DLR topology, and HMI.
A moving-average filter is the sliding-window smoother most instrument engineers drop into DCS and PLC analog paths. Here is how the window works, how N and sample time set lag, and when a...
On Frame 5–9 gas turbines, GE Mark VI and Mark VIe run control as function-block application software. This article maps process, protection, and sequencing functions—and what Toolbox ST access...
