Bently Nevada 330105-00-05-10-02-00 3300 XL 8 mm Reverse Mount Probe

Description

The 330105-00-05-10-02-00 is a 3300 XL 8 mm reverse mount proximity probe designed for non-contact eddy-current displacement measurement in critical rotating machinery. This probe features a 3/8-24 UNF thread, a 1.0 meter total system length (Option 10), and a standard Miniature ClickLoc coaxial connector (Option 02) without a connector protector.

This reverse mount configuration is utilized when space constraints or machinery design require the probe to be mounted through the machine case or bracket from the inside. The 3300 XL transducer system is engineered to provide precise shaft vibration and axial position data when paired with compatible 3300 XL Proximitor sensors and extension cables. This specific variant (Option 00 for agency approval) is intended for applications where standard hazardous area certifications are not required.

Features

• 3300 XL 8 mm reverse mount probe with 3/8-24 UNF threads
• 1.0 meter total length (Option 10)
• Standard Miniature ClickLoc coaxial connector (Option 02)
• Not required agency approval (Option 00)
• Designed for seamless integration with 3300 XL Proximitor sensors and extension cables
• Rugged PPS plastic probe tip for reliable performance in harsh oil and gas or power generation environments

Applications

• Turbine shaft vibration and axial position monitoring
• Compressor and pump rotor position measurement
• Critical machinery protection in power generation, oil and gas, and petrochemical facilities
• Applications requiring internal mounting configurations (reverse mount)

Ordering Information

Technical Specifications

Installation Guidelines

• Ensure the probe tip has the required clearance from the target surface to avoid mechanical interference.
• Reverse mount probes require access to the interior of the machine housing for installation.
• Verify that the extension cable and Proximitor sensor match the system length requirements to maintain calibration accuracy.
• Avoid over-tightening the mounting nut; ensure the probe is securely fixed but not stressed.
• Use appropriate shielding and grounding practices for signal cabling to minimize electrical noise.