Description

Option 075 (7.5 meters cable length), Option 10 (FluidLoc cable), and Option 05 (CSA, ATEX, and IECEx approvals) specify this 3300 XL standard extension cable configuration — 330130-075-10-05.

This configuration utilizes a 3.94 mm outside diameter FluidLoc triaxial cable to block process liquids and oils from migrating through the internal voids of the cable jacket. It connects a 3300 XL 8 mm proximity probe to a 3300 XL Proximitor sensor, establishing a total system length of 9.0 meters when matched with a 1.5-meter probe. The cable features gold-plated ClickLoc connectors that lock with finger-tight pressure to prevent connection degradation in environments with high mechanical vibration.

Features

• FluidLoc cable option to prevent migration of lube oil and other process fluids through the cable interior.
• Gold-plated ClickLoc coaxial connectors that secure with hand-tightening and resist vibrational loosening.
• 7.5 meters cable length matching standard 9.0-meter transducer system specifications.
• Non-armored triaxial construction with FEP outer jacket offering high chemical resistance.
• Agency approval option 05 certifying compliance with CSA, ATEX, and IECEx standards for hazardous areas.

Applications

Used in rotating machinery condition monitoring systems across heavy industrial processes including:

• Steam turbine shaft vibration and axial position measurement
• Gas turbine casing and rotor displacement monitoring
• Centrifugal compressor radial vibration sensing
• Industrial gearbox shaft movement tracking
• Hydroelectric generator shaft vibration monitoring

Ordering Information

Technical Specifications

Installation Guidelines

Observe the following installation criteria to ensure correct system performance:

• Do not bend the cable tighter than the 25.4 mm minimum bend radius limits to prevent internal core damage.
• Tighten coaxial ClickLoc connectors by hand until they click; do not use pliers unless mating with older non-XL connectors.
• Ensure field wiring and cable connections are shielded and isolated from sources of high electromagnetic interference.
• Use silicone tape or connector protectors if the connection is exposed to heavy external contaminants, although FluidLoc prevents internal migration.

Compliance and Certifications

The 330130-075-10-05 cable is certified under the following standards when used with an approved proximity sensor and probe assembly:

• CSA Class I, Division 1, Groups A, B, C, D
• ATEX Zone 0/1 Ex ia IIC T4/T5 Ga/Gb
• IECEx Ex ia IIC T4/T5 Ga/Gb
• CE Mark compliant