Bently Nevada 330130-080-00-05 3300 XL Standard Extension Cable

Description

The 330130-080-00-05 is a standard extension cable for the Bently Nevada 3300 XL 8 mm proximity transducer system. This component provides an 8.0 meter cable extension, utilizing a standard cable construction (Option 00) and carrying CSA, ATEX, and IECEx approvals (Option 05). It is used to connect 3300 XL 8 mm probes to a 3300 XL Proximitor sensor, ensuring the total system length matches the calibration requirements of the transducer chain.

This extension cable is engineered for durability in industrial environments, supporting critical machinery protection applications. The 3300 XL system is commonly used for monitoring shaft vibration, rotor position, and other critical parameters on rotating equipment such as steam turbines, gas compressors, and large motors. Proper selection of the cable length is critical for maintaining system accuracy, as the probe, extension cable, and Proximitor sensor lengths must be accounted for in the overall system configuration.

Features

• 8.0 meter (26.2 feet) total extension length
• Standard cable configuration for reliable signal transmission
• CSA, ATEX, and IECEx hazardous area approvals
• Compatible with 3300 XL 8 mm proximity probes and 3300 XL Proximitor sensors
• Designed for critical machinery monitoring and shaft displacement measurements

Applications

• Steam turbine-generator sets
• Centrifugal and axial compressors
• Large industrial motors and pumps
• General purpose rotating machinery protection systems
• Shaft vibration and axial position measurement chains

Ordering Information

Technical Specifications

Installation Guidelines

Ensure the extension cable length, when combined with the probe length, matches the requirements of the designated Proximitor sensor. Route cables through protective conduit where possible to prevent mechanical damage. Avoid tight bends that may exceed the minimum bend radius of the coaxial cable. In hazardous area installations, ensure compliance with the specific conditions of the CSA, ATEX, or IECEx certifications provided on the unit label.