Manufacturer: Bently Nevada
Product No.: 3500/42-04-00
Country of origin:United States
Product Type: Proximitor Seismic Monitors
Payment: T/T, Western Union
Weight: 910g
Dimensions: 241.3 mm x 24.4 mm x 241.8 mm
Shipping port: Xiamen
Warranty: 12 months
Continuous machinery protection and critical asset monitoring are facilitated by the 3500/42-04-00, a four-channel Proximitor Seismic Monitor module engineered for the Bently Nevada 3500 Series. This specialized module is configured with the option 04 I/O module (Part Number 135489-01), which features integrated internal barriers and internal terminations. It is designed to interface directly with up to four proximity or accelerometer transducers, enabling real-time vibration and position measurements across critical industrial rotating machinery.
The primary function of the module is to continuously acquire dynamic signal inputs from sensors, compare these inputs against user-defined alarm setpoints, and drive corresponding alarms when safety limits are exceeded. By utilizing integrated internal barriers, this configuration simplifies field wiring and minimizes the footprint required for intrinsic safety compliance in hazardous areas.
| Manufacturer | Bently Nevada |
| Part Number / Model | 3500/42-04-00 |
| Series | 3500 Machinery Protection System |
| Module Type | Proximitor Seismic Monitor |
| I/O Module Part Number | 135489-01 (Option 04) |
| I/O Module Type | I/O Module with Internal Barriers and Internal Terminations |
| Channel Configuration | 4 x Proximitor / Accelerometer channels |
| Transducer Support | Prox/Accel on channels 1 through 4 |
| Agency Approvals | 00 (None specified for this specific option) |
| Weight | 0.91 kg |
| Shipping Weight | 2.00 kg |
The 3500/42-04-00 module must be installed in a compatible slot within a Bently Nevada 3500 Series rack. To prevent electrostatic discharge or accidental shorting, ensure that power to the rack is shut off or that proper ESD protocols are strictly followed during hot-swap operations, if permitted by your facility's safety guidelines.
Field wiring must connect directly to the internal termination terminals on the 135489-01 I/O module. Ensure that shielded, twisted-pair cabling is utilized for all transducer inputs to mitigate electromagnetic interference and preserve signal integrity. The shield wires should be grounded according to standard system drawing requirements.
Global Express Shipping
Returns & Warranty
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
Design control-system redundancy by mapping shared dependencies, separating power and network paths, defining failover behavior, exposing degraded operation, and proof-testing every tolerated fault.
A structured control-cabinet troubleshooting method covering safe work, drawings, power paths, branch protection, DC supplies, return circuits, PLC outputs, fault records and repair verification.
A practical voltage-testing guide for industrial control panels, covering reference points, meter selection, live-dead-live checks, voltage drop, ghost voltage, stored energy and intermittent faults.
A practical lockout tagout guide covering hazardous-energy identification, isolation, stored-energy control, verification, group work, temporary testing, restoration, inspections and audits.
A field guide to point-of-use compressed-air preparation covering filters, regulators, drains, dryers, lubrication, pressure loss, isolation, monitoring, commissioning and leak testing.
A practical guide to manual, pilot and solenoid pneumatic valves, covering port functions, monostable and bistable behavior, PLC outputs, safe states, commissioning and fault diagnosis.
