Description

The BECKHOFF CP7713-0001-0050 is an industrial Panel PC designed for mounting arm installation. Housed in a fully enclosed aluminum housing, this unit is engineered to deliver control and visualization directly at the machine or process line without requiring an additional control cabinet. It is optimized for harsh operating conditions where space-saving and direct interaction are critical.

This model integrates a 19-inch display with an integrated front keyboard, providing clear operator feedback and direct entry capabilities. The rear of the panel features four M6 threaded holes on a standard pattern, allowing direct mounting to standard mounting arms or adapter plates. The fanless passive cooling design utilizes the aluminum housing itself to dissipate heat efficiently.

Equipped with an Intel Atom x5-E39xx processor on a compact motherboard, the CP7713-0001-0050 offers industrial-grade processing capability, solid-state CFast card storage, and dual Gigabit Ethernet interfaces configured for high-speed industrial networking and direct system integration.

Features

• 19-inch TFT display with a resolution of 1280 x 1024 pixels.
• Fully enclosed aluminum housing providing complete IP65 protection against dust and moisture.
• Integrated front operator keyboard with system control keys.
• Designed for direct mounting arm installation using four integrated M6 x 18 mm threaded backplane holes.
• Fanless passive cooling architecture.
• Dual 10/100/1000BASE-T Ethernet interfaces.
• Support for high-reliability CFast flash memory cards.
• Industrial serial interface option via IP65-rated connections.

Applications

• Machine-level control and Human-Machine Interface (HMI) visualization.
• Distributed operator stations mounted on swing arms or columns.
• Process monitoring in wet, dusty, or demanding industrial environments.

Technical Specifications

Connections / Interfaces

Installation Guidelines

1. Ensure all associated power supplies and machinery are fully de-energized before mounting the device.
2. Position the Panel PC onto the mounting arm adapter, aligning the four M6 threaded holes on the rear backplane.
3. Secure the device using M6 screws with a maximum thread engagement depth of 18 mm. Do not overtighten.
4. Ensure all IP65-rated cables are firmly seated and locked into their mating connectors to maintain environmental sealing integrity.
5. Connect the protective earth grounding point to the local system ground.
6. Connect the 24 V DC power supply, paying close attention to terminal polarity before energizing the system.