Manufacturer: Emerson
Product No.: A6120
Country of origin:United States
Product Type: Vibration Monitor Module
Barcode: 8537101190
Payment: T/T, Western Union
Weight: 450g
Dimensions: 3.0 cm x 12.84 cm x 16.0 cm (1.181 in x 5.055 in x 6.300 in)
Shipping port: Xiamen
Warranty: 12 months
The Emerson A6120 is a Case Seismic Electro-dynamic Vibration Monitor designed for high reliability machinery protection in critical rotating equipment applications. Built as a 2-channel, 3U size, 1-slot plug-in module for the CSI 6500 Machinery Health Monitor rack system, it reduces cabinet space requirements compared to traditional cards. The A6120 interfaces with electro-dynamic differential sensors (such as model numbers 9266, 9267, or 9268) and provides overall vibration monitoring for bearing cases in velocity. It processes vibration inputs with lower cutoff values of 1 or 5 Hz and adjustable upper cutoffs from 50 to 2000 Hz. The unit integrates into plant infrastructure via ModBus TCP/IP outputs, RS-232 configuration interfaces, and 4/20 mA or 0-10 VDC proportional outputs, alongside buffered raw sensor signal outputs.
| Model Number | Product Description |
|---|---|
| A6120 | Case Seismic Electro-dynamic Vibration Monitor |
| Category | Parameter | Specification |
|---|---|---|
| Transducer Inputs | Number of Inputs | Two, independent channels |
| Type of Inputs | Electro-dynamic (electro-mechanical), differential | |
| Compatible Sensors | Emerson part numbers 9266, 9267, or 9268 | |
| Isolation | Galvanically separated from power supply | |
| Input Resistance | >100 kΩ | |
| Input Voltage Range | -5 to +15 VDC | |
| Input Frequency Range | Lower cutoff: 1 or 5 Hz; Upper cutoff: 50 to 2000 Hz adjustable | |
| Measuring Range & Dynamic | Range | Configurable via software; Vrms (metric) = 5 to 100 mm/s (±25 to ±500 μm); Vrms (English) = 0.197 to 3.937 in/sec (±0.984 to ±19.685 mils) |
| Frequency Range | 10 to 1000 Hz (VDI 2056, DIN 4566, ISO 3945) | |
| Selectable Frequency Range | 5 to 50 Hz, 10 to 50 Hz, 50 to 1000 Hz, or 50 to 1600 Hz | |
| Dynamic Input Voltage | Min 311 mV peak to peak; Max 9500 mV peak to peak | |
| Sensor Power Supply | Separate buffered sensor supply, galvanically separated, open/short circuit proof | |
| Lifting Coil Current | 0 to 8 mA configurable in steps of 40 μA | |
| Lifting Coil Accuracy | ±0.5% of full scale range, ±0.5% of configured value | |
| Max Permissible Load | 3.4 kΩ at 2 mA | |
| Front Outputs & Controls | LEDs | 2x OK LEDs (green), 2x Alert/Danger LEDs (red) |
| Buffered Outputs | Two outputs, ±10 V, >100 kΩ load, 0.1 Hz to 5 kHz (-3 dB) | |
| Mini DIN Socket | Module interface connection for RS-232 configuration/monitoring | |
| Rear Outputs & Analysis | Mode Current Outputs | 0/4-20 mA per channel, permissible load <500 Ω, accuracy ±1% full scale, settling time 0-10 s |
| Mode Voltage Outputs | 0 to 10 VDC per channel proportional to main value, open/short circuit proof | |
| Rear Buffered Outputs | Raw buffered signal, 0 to 12 V peak to peak, frequency range 0.1 Hz to 15 kHz (-3 dB), load >10 kΩ | |
| Communication / Interfaces | ModBus TCP/IP output; CSI 4500 4-channel plug & play connector | |
| Alarm Setpoints & Delays | Alert & Danger Delays | 0 to 5 s per channel (0 to 36 s with A6740 relay card); range 5 to 100% full scale |
| Limit Multiply | Remote relay input, factor 1.00 to 4.99 | |
| Trip Bypass | Remote relay input | |
| Electrical & Mechanical | Power Consumption | Max 6 W, 250 mA at 24 VDC |
| Physical Format | PCB/EURO card according to DIN 41494, 100 x 160 mm (3.937 x 6.300 in) | |
| Dimensions | Width: 30.0 mm (1.181 in) (6 TE); Height: 128.4 mm (5.055 in) (3 HE); Length: 160.0 mm (6.300 in) | |
| Space Requirements | 1 slot (14 modules fit into each 19-inch rack) | |
| Net / Gross Weight | Net: approx. 320 g (0.705 lbs); Gross: approx. 450 g (0.992 lbs) | |
| Environmental | Protection Rating | Module: IP 00; Front Plate: IP 21 (DIN 40050) |
| Climate | DIN 40040 class KTF | |
| Operating Temperature | 0 to 65 degC (32 to 149 degF) | |
| Storage Temperature | -30 to 85 degC (-22 to 185 degF) | |
| Relative Humidity | 5 to 95%, non-condensing | |
| Vibration / Shock | Vibration: IEC 68-2 part 6 (0.15 mm, 10-55 Hz / 19.6 m/s2, 55-150 Hz); Shock: IEC 68-2 part 29 (98 m/s2 peak, 16 ms) |
Global Express Shipping
Returns & Warranty
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Color pattern |
Greyish White
|
| Country of origin |
United States
|
| Power source |
DC Power
|
Hairpin windings raise slot fill and support compact traction motors, but conductor geometry, AC losses, insulation damage, weld quality, and cooling determine whether the design meets its targets.
Use Ansible to standardize SCADA server changes without expanding OT risk. This guide covers inventories, idempotent playbooks, staged testing, credentials, logging, and practical rollback controls.
A VPN encrypts the path to an industrial network, but secure remote PLC work also needs identity controls, segmented access, change approval, logging, safe operating boundaries, and tested recovery...
Understand how industrial coils create magnetic force, induce voltage, generate switching transients, and fail in relays, solenoids, transformers, motors, and proximity sensors. in service.
Design control-system redundancy by mapping shared dependencies, separating power and network paths, defining failover behavior, exposing degraded operation, and proof-testing every tolerated fault.
A structured control-cabinet troubleshooting method covering safe work, drawings, power paths, branch protection, DC supplies, return circuits, PLC outputs, fault records and repair verification.
