Manufacturer: Emerson
Product No.: A6312/06
Country of origin:United States
Product Type: Speed Key Module
Barcode: 8537101190
Payment: T/T, Western Union
Weight: 450g
Dimensions: 30.1 mm x 128.4 mm x 160.0 mm (W x H x D)
Shipping port: Xiamen
Warranty: 12 months
The Emerson A6312/06 is a Dual Channel Speed/ Key Monitor designed for measuring and conditioning shaft speeds, rotation direction, speed difference, and rotational reference marks (key-pulses) in rotating machinery. Constructed around a high-performance microprocessor, the module processes signals received from two eddy current measuring chains or hall-effect sensors (such as PR 9376). It interfaces via a 48-pin DIN 41612 (design F 48 M) backplane connector and includes front-panel SMB signal taps alongside a mini-DIN (TM 0508A/6) connector for RS 232 configuration, plus a rear-bus RS 485 interface for system integration. The module operates using two independent, galvanically isolated 0...20 mA or 4...20 mA current outputs and opto-decoupled collector/emitter function outputs, supporting machine monitoring setups within the CSI 6500 / A6000 architecture.
| Parameter | Specification |
|---|---|
| Manufacturer | Emerson Process Management |
| Model | A6312/06 (A 6312/06) |
| Input Nominal Range | 0 ... 27.3 V DC |
| Input Limit Range | 0 ... 30 V DC |
| Input Resistance | > 100 kΩ |
| Sensor Signal Outputs (Front SMB) | 0 ... 4.1 V; signal = 0.15 x sensor input signal |
| Sensor Output Precision | ±1 % of f.s.d. |
| Frequency Range | 0 ... 16 kHz (-3 dB) ±20 % |
| TTL Pulse Outputs | 0 ... 5 V pp, 0 ... 20 kHz |
| Key Pulse Outputs | Max. +24 V at UC, +48 V DC at collector; Max. current C-E: 100 mA |
| Pulse Duration | 1 ms ±20 % (tooth synchronous in speed mode) |
| Max. Speed Limit | 65535 rpm with 18 teeth (limited by 20 kHz max. signal frequency) |
| Max. Number of Teeth | 255 |
| Current Outputs (I1, I2) | 0 ... 20 mA or 4 ... 20 mA (galvanically isolated) |
| Current Output Resolution / Accuracy | 16 bit / ±1 % of f.s.d. |
| Current Output Load | 500 Ω |
| Binary Inputs Signal Level | LOW: 0 ... +3 V, HIGH: +13 ... +48 V |
| Alarm Reaction Time | Average 2 ms |
| Function Output Rating | C-E off: max. 48 V; C-E conducting: max. 100 mA |
| Communication Interfaces | RS 232 (front Mini-DIN), RS 485 (rear bus pins d4, z4) |
| Supply Voltage Inputs | Redundant +24 V DC (19 ... 31.2 V DC range) |
| Power Consumption | Max. 6 W (max. 250 mA at 24 V) |
| Sensor Supply Voltage | 26.75 V DC ±2 %; Max. current 35 mA |
| Operating Temperature (Nominal) | 0 ... +45 Celsius (CSA requirement) |
| Operating Temperature (Max.) | -10 ... +65 Celsius |
| Storage Temperature | -30 ... +85 Celsius |
| Relative Humidity | ≤ 95 % non-condensing |
| Enclosure Protection Class | IP 00 open design |
| PCB Format | Euro format (100 mm x 160 mm) |
| Width | 6HP (approx. 30 mm) |
| Connector Type | DIN 41612, design F 48 M |
| Weight | Approx. 320 g (without packaging) / Approx. 450 g (with standard packaging) |
| Connector Pin | Function |
|---|---|
| z2 | UB+ (+24V, redundant supply input) |
| b2 | U- (0V/Common supply) |
| d2 | UN+ (+24V supply input) |
| z4 | B (RS 485 bus line) |
| b4 | GND (BP, Common, RS 485) |
| d4 | A (RS 485 bus line) |
| z6 | Supply1+ (sensor supply channel 1) |
| b6 | Supply1- (sensor supply channel 1) |
| d6 | Supply2+ (sensor supply channel 2) |
| z8 | AIN1- (Input channel 1, SENS1-A-) |
| b8 | Supply2- (sensor supply channel 2) |
| d8 | AIN2- (Input channel 2, SENS2-A-) |
| z10 | AIN1+ (Input channel 1, SENS1-B+) |
| b10 | GND (Common) |
| d10 | AIN2+ (Input channel 2, SENS2-B+) |
| z12 | Test1 (internal test value activation channel 1) |
| b12 | GND |
| d12 | PU1 (24V pull-up pulse1) |
| z14 | Pulse1-TTL (processed pulse output 1) |
| b14 | Pulse1-E (emitter pulse 1) |
| d14 | Pulse1-C (collector pulse 1) |
| z16 | Pulse2-TTL (processed pulse output 2) |
| b16 | Pulse2-E (emitter pulse 2) |
| d16 | Pulse2-C (collector pulse 2) |
| z18 | I1+ (current output CH1) |
| b18 | I1- (current output CH1 common) |
| d18 | PU2 (24V pull-up pulse2) |
| z20 | I2+ (current output CH2) |
| b20 | I2- (current output CH2 common) |
| d20 | Reset peak value 1 |
| z22 | ES (external lock input) |
| b22 | GND |
| d22 | Test2 (internal test value activation channel 2) |
| z24 | SC-D (operating principle GW1 / Out 2-1 inversion) |
| b24 | GND |
| d24 | SC-A (operating principle GW2 / Out 1-1 inversion) |
| z26 | CC1-C (channel clear 1 collector) |
| b26 | GW1-A-C (alert 1 collector / Out 1-2 collector) |
| d26 | GW1-D-C (danger 1 collector / Out 1-1 collector) |
| z28 | CC1-E (channel clear 1 emitter) |
| b28 | GW1-A-E (alert 1 emitter / Out 1-2 emitter) |
| d28 | GW1-D-E (danger 1 emitter / Out 1-1 emitter) |
| z30 | CC2-C (channel clear 2 collector) |
| b30 | GW2-A-C (alert 2 collector / Out 2-2 collector) |
| d30 | GW2-D-C (danger 2 collector / Out 2-1 collector) |
| z32 | CC2-E (channel clear 2 emitter) |
| b32 | GW2-A-E (alert 2 emitter / Out 2-2 emitter) |
| d32 | GW2-D-E (danger 2 emitter / Out 2-1 emitter) |
Global Express Shipping
Returns & Warranty
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Color pattern |
Green
|
| Country of origin |
United States
|
A practical commissioning sequence for KEPServerEX OPC UA connections: define data ownership, test tags locally, configure endpoint and certificate trust, limit access, then verify failure recovery...
Commissioning an Ethernet-connected PLC often starts with the laptop, not the controller. Learn how to record existing settings, choose a temporary address, test connectivity, and restore the plant...
Combustible dust controls require more than alarms. Learn how to map dust generation, select instrumentation, design interlocks, handle failed feedback, test safe states, and maintain the full...
Hairpin windings raise slot fill and support compact traction motors, but conductor geometry, AC losses, insulation damage, weld quality, and cooling determine whether the design meets its targets.
Use Ansible to standardize SCADA server changes without expanding OT risk. This guide covers inventories, idempotent playbooks, staged testing, credentials, logging, and practical rollback controls.
A VPN encrypts the path to an industrial network, but secure remote PLC work also needs identity controls, segmented access, change approval, logging, safe operating boundaries, and tested recovery...
