Providing precise torque and speed control within the MR-JE platform, the Mitsubishi Electric MR-JE-300A operates as a high-performance AC servo amplifier engineered for modern industrial motion control. This unit utilizes advanced sine-wave PWM control and current control technology to deliver smooth motor rotation and high-dynamic response. Equipped with an integrated dynamic brake and a forced-cooling fan system, the MR-JE-300A ensures reliable operation under continuous load cycles in demanding automation networks.
| Parameter | Value |
|---|---|
| Manufacturer | Mitsubishi Electric |
| Model Number | MR-JE-300A |
| Product Series | MR-JE-_A |
| Control Method | Sine-wave PWM control / Current control method |
| Rated Output Current | 11.0 A |
| Input Power Supply Voltage | 3-phase 170 V AC to 264 V AC |
| Input Frequency Range | 50/60 Hz |
| Protection Rating | IP20 (Open structure, force cooling) |
| Dynamic Brake | Built-in |
| Actual Weight | 2.1 kg |
| Shipping Weight (Calculated) | 4.0 kg |
| Package Dimensions (Calculated) | 260 x 210 x 140 mm |
| Country of Origin | Japan |
The MR-JE-300A is the analog/pulse train interface variant of the MR-JE series. It is not directly interchangeable with the MR-JE-300B, which is configured for high-speed fiber-optic SSCNET III/H network motion communication. Verify control system command architecture prior to installation.
As an IP20 open-type unit featuring force cooling, this amplifier is susceptible to conductive dust and fine particulates. Enclosing the unit within a dust-tight IP54 industrial cabinet is necessary for reliable continuous operation. Ensure at least 40 mm of clearance at the top and bottom of the unit to permit unrestricted fan-driven airflow.
Ensure a solid chassis ground connection is established before applying control voltage. When configuring the drive using MR Configurator2, run the initial auto-tuning sequence with the mechanical load fully decoupled to prevent sudden high-frequency resonance or system instability.
Isolate and lock out the main 3-phase incoming power. Wait at least 15 minutes for the internal bus capacitors to fully discharge. Always measure the DC bus voltage across the positive and negative terminals to confirm it is below 50 V DC before executing wiring modifications.
Mount the servo amplifier vertically on a flat, vibration-free panel within a clean industrial enclosure.
Connect the main 3-phase 200 V AC lines to the L1, L2, and L3 power supply terminals using shielded cabling.
Verify and connect the motor output terminal phases (U, V, W) and the encoder feedback connector securely.
Secure ground terminals to the common ground bar to minimize electromagnetic interference (EMI).
Global Express Shipping
Returns & Warranty
Manufacturer: Mitsubishi Electric
Product No.: MR-JE-300A
Country of origin:United States
Product Type: Servo Amplifiers
Payment: T/T, Western Union
Weight: 4000g
Dimensions: 260 x 210 x 140 mm
Shipping port: Xiamen
Warranty: 12 months
Providing precise torque and speed control within the MR-JE platform, the Mitsubishi Electric MR-JE-300A operates as a high-performance AC servo amplifier engineered for modern industrial motion control. This unit utilizes advanced sine-wave PWM control and current control technology to deliver smooth motor rotation and high-dynamic response. Equipped with an integrated dynamic brake and a forced-cooling fan system, the MR-JE-300A ensures reliable operation under continuous load cycles in demanding automation networks.
| Parameter | Value |
|---|---|
| Manufacturer | Mitsubishi Electric |
| Model Number | MR-JE-300A |
| Product Series | MR-JE-_A |
| Control Method | Sine-wave PWM control / Current control method |
| Rated Output Current | 11.0 A |
| Input Power Supply Voltage | 3-phase 170 V AC to 264 V AC |
| Input Frequency Range | 50/60 Hz |
| Protection Rating | IP20 (Open structure, force cooling) |
| Dynamic Brake | Built-in |
| Actual Weight | 2.1 kg |
| Shipping Weight (Calculated) | 4.0 kg |
| Package Dimensions (Calculated) | 260 x 210 x 140 mm |
| Country of Origin | Japan |
The MR-JE-300A is the analog/pulse train interface variant of the MR-JE series. It is not directly interchangeable with the MR-JE-300B, which is configured for high-speed fiber-optic SSCNET III/H network motion communication. Verify control system command architecture prior to installation.
As an IP20 open-type unit featuring force cooling, this amplifier is susceptible to conductive dust and fine particulates. Enclosing the unit within a dust-tight IP54 industrial cabinet is necessary for reliable continuous operation. Ensure at least 40 mm of clearance at the top and bottom of the unit to permit unrestricted fan-driven airflow.
Ensure a solid chassis ground connection is established before applying control voltage. When configuring the drive using MR Configurator2, run the initial auto-tuning sequence with the mechanical load fully decoupled to prevent sudden high-frequency resonance or system instability.
Isolate and lock out the main 3-phase incoming power. Wait at least 15 minutes for the internal bus capacitors to fully discharge. Always measure the DC bus voltage across the positive and negative terminals to confirm it is below 50 V DC before executing wiring modifications.
Mount the servo amplifier vertically on a flat, vibration-free panel within a clean industrial enclosure.
Connect the main 3-phase 200 V AC lines to the L1, L2, and L3 power supply terminals using shielded cabling.
Verify and connect the motor output terminal phases (U, V, W) and the encoder feedback connector securely.
Secure ground terminals to the common ground bar to minimize electromagnetic interference (EMI).
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
Implement a 3-SPST switch XOR light circuit in LogixPro or RSLogix 500 using an internal relay bit. Includes truth tables, boolean equations, and verified.
Integrate Allen-Bradley CompactLogix, Caterpillar ATS, and generators into DeltaV DCS over Modbus RTU. Covers ProSoft MVI69-MCM, Miille DIN266 gateways.
ONS instruction fires but the OTE coil never latches in Studio 5000 because the one-shot is only true for one scan. Use OTL/OTU or seal-in logic instead.
Configure Allen-Bradley Kinetix 5500 servo drives on EtherNet/IP. Covers CIP Sync, IEEE 1588 V2 timing, Stratix selection, DLR topology, and HMI.
A moving-average filter is the sliding-window smoother most instrument engineers drop into DCS and PLC analog paths. Here is how the window works, how N and sample time set lag, and when a...
On Frame 5–9 gas turbines, GE Mark VI and Mark VIe run control as function-block application software. This article maps process, protection, and sequencing functions—and what Toolbox ST access...
