Fabricante: Mitsubishi Electric
Nº do Produto: FX3GE-40MT/ES
País de origem:Estados Unidos
Tipo de Produto: PLC CPU Modules
Pagamento: T/T, Western Union
Peso: 800g
Dimensões: 175 mm x 90 mm x 86 mm
Porto de embarque: Xiamen
Garantia: 12 meses
Managing complex industrial tasks with localized automation is streamlined using the Mitsubishi Electric FX3GE-40MT/ES programmable logic controller. This compact, all-in-one base unit integrates high-performance microprocessing with built-in digital inputs, transistor outputs, analog processing, and dual communication interfaces. Engineered as an extension of the reliable MELSEC FX3G architecture, this controller features embedded Ethernet and USB ports, eliminating the need for external expansion cards in space-constrained control panels.
| Parameter | Specification |
|---|---|
| Manufacturer | Mitsubishi Electric |
| Model / Article Number | FX3GE-40MT/ES |
| Series | MELSEC FX3GE |
| Rated Power Supply | 100 to 240 V AC (+10% / -15%), 50/60 Hz |
| Total Integrated I/O Points | 40 points |
| Digital Inputs | 24 Inputs (24V DC, Sink/Source selected by terminal) |
| Digital Outputs | 16 Outputs (Transistor, Sink) |
| Integrated Analog Inputs | 2 Channels (0-10V DC / 4-20mA) |
| Integrated Analog Outputs | 1 Channel (0-10V DC / 4-20mA) |
| Communication Ports | Ethernet (RJ45), USB (Mini-B), RS-422 |
| Memory Capacity | 32,000 steps internal EEPROM program memory |
| Operating Temperature Range | 0 to 55 degC (32 to 131 Fahrenheit) |
| Net Weight | 0.8 kg |
| Dimensions (W x H x D) | 175 mm x 90 mm x 86 mm |
| Terminal Label | Function / Assignment |
|---|---|
| L / N | 100-240 V AC Main Power Supply input |
| 24V / 0V | Auxiliary 24V DC sensor power output supply |
| S/S | Sink/Source selector terminal for digital inputs |
| X000 - X027 | 24V DC Digital Inputs (high-speed counters on first channels) |
| Y000 - Y017 | Transistor Sink Outputs (pulse output functionality on Y000-Y002) |
| V1+, I1+, VI1-, V2+, I2+, VI2- | Analog Inputs (Channel 1 and Channel 2 voltage/current terminals) |
| V3+, I3+, VI3- | Analog Output (Channel 3 voltage/current terminals) |
The FX3GE-40MT/ES offers a direct physical upgrade path for older FX1N-40MT-D and standard FX3G-40MT/ES micro-controllers. Existing FX3G ladder code is fully backward compatible. However, to access the built-in Ethernet parameters and configure analog channels directly without from/to instructions, software development must be completed in GX Works2 (version 1.98 or later).
This controller features standard Transistor Sink outputs (indicated by the MT suffix). Connecting field loads wired as sink logic to an improper polarity source will destroy the internal optocouplers. Ensure that external auxiliary power supplies are properly bonded. Thermal dissipation issues can manifest inside sealed control cabinets if the unit is installed horizontally; strictly adhere to vertical wall-mount layouts allowing a minimum clearance of 50mm above and below the chassis for natural convection airflow.
To prevent electrical noise interference on the integrated analog channels, always separate the 0-10V / 4-20mA routing from high-current AC power cables. Run shielded twisted-pair (STP) wiring for analog loops and terminate the shield ground strictly at the PLC end to block localized ground loop currents from destabilizing sensor values.
CRITICAL WARNING:
Isolate all main power sources prior to conducting installation, mounting, or termination work. Failure to de-energize external circuits can cause severe electrical shock, hardware failure, or unexpected movement of connected actuators.
Mount the controller onto a standard 35mm DIN rail or secure it to a flat backplate using integrated M4 mounting screw points.
Connect the main 100-240 V AC supply source to the terminal block, ensuring correct protective grounding (PE) alignment.
Wire input lines with the selected active polarity (Sink or Source orientation configured through the S/S terminal).
Connect program transmission via Ethernet or USB, launch GX Works2, and run diagnostic procedures to verify hardware registers.
Envio Expresso Global
Devoluções e Garantia
Os pedidos são processados e entregues de segunda a sexta-feira (exceto feriados).
Para elegibilidade completa, taxas de reposição e detalhes de devolução internacional, por favor, consulte nosso oficial Política de Reembolso e Devolução .
| Country of origin |
Estados Unidos
|
Este artigo explica como os atuadores elétricos integrados, como a série e-Actuator da SMC, estão transformando o controle de movimento industrial ao substituir os sistemas pneumáticos e hidráulicos...
Este artigo explica como os sistemas PLC realizam operações matemáticas básicas, como adição, subtração, multiplicação, divisão, módulo e exponenciação dentro da automação industrial. Ele mostra como...
O artigo explica várias funções avançadas de lógica Booleana usadas na programação de CLPs além das operações básicas AND, OR e NOT. Ele aborda como ferramentas como tabelas verdade, multiplexadores,...
A lógica booleana é a base de todo programa PLC. Desde controles simples de máquinas até sistemas complexos de automação industrial, as portas lógicas determinam como os controladores respondem a...
Firewalls industriais desempenham um papel crucial na cibersegurança OT, protegendo redes PLC, DCS e SCADA por meio de segmentação, controle de entrada/saída e integração IDS/IPS alinhada aos...
As garras robóticas modernas estão evoluindo além das tradicionais mandíbulas mecânicas. De sistemas adesivos inspirados em lagartos-gecko e garras macias de grau alimentício a ferramentas de armazém...
