Fabricant : BECKHOFF
N° de produit : CP2618-0000
Pays d'origine :Allemagne
Type de produit : PC panneau avec ARM Cortex™-A8
Paiement : Virement bancaire, Western Union
Poids : 500g
Dimensions : 550 x 380 x 150 mm
Port d'expédition : Xiamen
Garantie : 12 mois
Process monitoring and human-machine interface demands are met with industrial reliability by the Beckhoff CP2618-0000, a high-efficiency built-in Panel PC configured with a widescreen multi-finger touch interface. Designed for space-saving control cabinet integration, this unit combines an ARM Cortex-A8 (1 GHz) processor with a highly durable glass-front display to deliver a robust operator terminal for automated production lines. Operating on Windows Embedded Compact 7, the Panel PC is highly optimized to run TwinCAT 2 or TwinCAT 3 runtime engines, providing a cost-effective platform for compact PLC and motion control projects.
| Parameter | Specification |
|---|---|
| Manufacturer | Beckhoff Automation |
| Model Series | CP26xx Built-in Panel PC |
| Part Number / SKU | CP2618-0000 |
| Processor | ARM Cortex-A8, 1 GHz |
| System Memory | 1 GB DDR3 RAM |
| Storage | 1 slot for microSD (512 MB standard, expandable up to 16 GB) |
| Persistent Memory | 128 KB NOVRAM |
| Display Size & Type | 18.5-inch multi-touch (projected capacitive) |
| Display Resolution | 1366 x 768 pixels |
| Power Supply | 24 V DC |
| Operating System | Windows Embedded Compact 7 (English) |
| Protection Class | IP65 Front, IP20 Rear |
| Operating Temperature | 0 to 55 degC |
| Country of Origin | Germany |
| Shipping Weight (Calculated) | 5.0 kg |
| Package Dimensions (Calculated) | 550 x 380 x 150 mm |
| Interface Connection | Function / Assignment |
|---|---|
| Ethernet (1 x RJ45) | 10/100BASE-T on-board industrial LAN port |
| EtherCAT (1 x RJ45) | Dedicated on-board EtherCAT terminal controller interface |
| USB 2.0 (Rear) | 2 x USB 2.0 Type A ports for external peripherals |
| RS232 | 1 x D-sub 9-pin serial channel interface |
| Power Input | 3-pin male connector for 24 V DC power configuration |
The CP2618-0000 uses a 32-bit ARM RISC architecture running Windows Embedded Compact 7 (WEC7). Note that software applications compiled for x86/x64 environments will not run on this processor without re-compiling for ARM. For migration paths from legacy systems, verify that your TwinCAT library extensions have direct ARM-compatible runtimes before swapping physical panel configurations.
To prevent premature wear on the storage media, do not write continuous historical trend logs directly to the microSD card. Leverage the 128 KB NOVRAM persistent memory to store active cycle parameters, and route high-frequency diagnostics or historical logging over the network interface to a centralized database server.
When routing the dedicated EtherCAT cable to the CP2618 rear interface, use CAT5e shielded twisted pair cabling at minimum. Standard non-shielded patch cables risk inducing electromagnetic noise from high-frequency servo drives, leading to sync losses and control cycle timeouts. Ensure the mounting clamps are torqued down evenly to maintain the integrity of the front IP65 sealing gasket against the cutout cabinet plate.
CRITICAL WARNING:
Isolate and completely lock out the main power source before performing panel integration. Verify zero voltage presence at the supply cables before terminating the 24 V DC supply plug into the panel rear. Failure to follow industrial de-energization procedures risks equipment damage and electrical shock.
Prepare a cabinet cutout precisely matching the mechanical installation dimensions of the 18.5" CP2618 housing.
Check that the sealing gasket is correctly seated around the back lip of the front bezel, then insert the unit carefully into the cutout.
Secure the panel in place using the supplied tension brackets, ensuring uniform tension to maintain the IP65 ingress seal.
Connect a low-resistance chassis ground wire to the rear grounding bolt prior to connecting the main 24 V DC power connector.
Expédition express mondiale
Retours et garantie
Les commandes sont traitées et livrées du lundi au vendredi (hors jours fériés).
Pour connaître l'éligibilité complète, les frais de restockage et les détails des retours internationaux, veuillez consulter notre site officiel Politique de remboursement et de retour .
| Country of origin |
Allemagne
|
Cet article explique comment les actionneurs électriques intégrés, tels que la série e-Actuator de SMC, transforment le contrôle du mouvement industriel en remplaçant les systèmes pneumatiques et...
Cet article explique comment les systèmes PLC réalisent des opérations mathématiques de base telles que l'addition, la soustraction, la multiplication, la division, le modulo et l'exponentiation dans...
L'article explique plusieurs fonctions avancées de la logique booléenne utilisées en programmation d'automates programmables industriels (API) au-delà des opérations de base ET, OU et NON. Il aborde...
La logique booléenne est la base de tout programme PLC. Des commandes machines simples aux systèmes d'automatisation industrielle complexes, les portes logiques déterminent comment les contrôleurs...
Les pare-feux industriels jouent un rôle crucial dans la cybersécurité OT, protégeant les réseaux PLC, DCS et SCADA grâce à la segmentation, au contrôle des entrées/sorties et à l’intégration IDS/IPS...
Les pinces robotiques modernes évoluent au-delà des mâchoires mécaniques traditionnelles. Des systèmes adhésifs inspirés des geckos aux pinces souples de qualité alimentaire, en passant par des...
