Module d'E/S numérique série UR GE Multilin UR6DV (UR-6DV)

Description

The UR6DV (UR-6DV) is a high-density digital input/output module engineered for the General Electric Universal Relay (UR) Series platform. This module serves as a critical hardware interface between external field switchgear devices and the internal processing environment of protection, control, and monitoring relays. It provides simultaneous discrete signal acquisition and heavy-duty control execution capabilities, facilitating high-speed communication over the internal backplane bus. Designed for deployment in utility substations, power generation facilities, and critical heavy industrial networks, the UR6DV ensures reliable monitoring of breaker status auxiliary contacts, disconnect switches, and external lockout systems while providing low-latency control outputs for protective tripping circuits. It functions seamlessly within modular UR chassis configurations, maintaining full compatibility with core processor modules and EnerVista orchestration software.

Features

• High-density contact configuration optimizing chassis slot utilization
• Hardware and software filtering on inputs to eliminate false triggers from induced AC noise or DC battery ground faults
• Heavy-duty output relay contacts designed to handle inductive trip coil currents
• High-speed physical contact closure execution minimizing protection loop latency
• Plug-in form factor allowing secure mounting inside standard 19-inch UR rack enclosures

Applications

• Utility substation automation and distribution system control
• Circuit breaker status monitoring and automatic trip/close control loops
• Disconnect switch and grounding switch position indication
• Power generation plant protection systems (such as G60 or Generator Management setups)
• Industrial microgrid power management and load shedding systems

Technical Specifications

Installation Guidelines

• Chassis Isolation: De-energize the main UR relay chassis and completely isolate all connected external DC battery control voltage sources before inserting or removing the module.
• Slot Alignment: Slide the module precisely along the plastic guide rails of the designated rear chassis slot to prevent pins on the backplane connector from bending.
• Terminal Block Fastening: Secure the rear terminal block using the integral captive screws to guarantee structural stability under high-vibration conditions.
• Shielding and Grounding: Ensure the overall chassis ground terminal is connected to the primary station ground bus via a low-impedance copper strap to mitigate EMI and RFI anomalies.
• Cable Routing: Separate discrete control and trip circuit wiring from low-voltage communication or analog signaling paths within the enclosure panels.

FAQ

What is the primary function of the UR6DV module inside a Universal Relay chassis?

The module acts as the physical link between external discrete field components and the internal microprocessor logic, reading high-voltage status indications and executing hardware trip or close commands.

Does this module support hot-swapping while the relay is active?

No, complete isolation of the chassis power supply and external field wetting voltages is required prior to removal to avoid unintentional circuit breaker tripping or backplane communication damage.

How does the input circuitry manage high levels of electrical noise common in substations?

The digital inputs employ selectable hardware thresholds combined with programmable software debounce timers to filter out high-frequency transients, inductive coupling, and battery ground faults.

Are the contact outputs capable of directly breaking inductive circuit breaker trip currents?

Yes, the internal relays are designed with high inductive current ratings and arc suppression properties to reliably control standard utility switchgear trip coils.