The CX5130-N031 (CX5130N031) is a high-performance, fanless Embedded PC designed for DIN rail mounting, powered by a robust Intel Atom® multi-core processor with a 1.75 GHz clock frequency. This specific model features a factory-integrated RS485 interface via a 9-pin D-sub socket, pre-configured as an end point with internal termination ON.
As a middle-tier powerhouse in the CX5100 series, the CX5130-N031 is engineered for B2B industrial automation applications requiring significant computational power, such as multi-axis motion control, complex gateway functions, and high-level communication tasks. By consolidating high-speed EtherCAT I/O control with a hardware-terminated serial port, it provides a specialized solution for connecting legacy serial networks (Modbus RTU, etc.) to modern Industry 4.0 environments.
The CX5130-N031 is technically optimized for RS485 bus integrity at the physical layer. The termination on configuration means the internal 120-ohm resistor is engaged, effectively suppressing signal reflections. Configured without echo (half-duplex), it is ready for high-speed, 2-wire serial communication.
The device architecture supports the automatic recognition of both E-bus (EtherCAT) and K-bus (Bus Terminals), allowing users to switch between I/O technologies without changing the CPU. With its multi-core Intel Atom® CPU, the CX5130 provides a substantial performance boost over the CX5120 series, enabling more complex TwinCAT 3 PLC tasks and larger process images while maintaining a fanless, maintenance-free design.
| Attribute | Specification Details |
| Model | CX5130-N031 |
| Brand | BECKHOFF |
| Processor | Intel Atom® (1.75 GHz, Multi-core) |
| Interface Type | 1 x RS485 |
| Connection Port | 9-pin D-sub socket |
| RS485 Config | End point, without echo, Termination ON |
| Expansion Bus | Automatic E-bus / K-bus recognition |
| Cooling | Fanless (Passive Convection) |
| Operating Temp | -25 to +60 Celsius |
| Storage Temp | -40 to +85 Celsius |
| Dimensions (W x H x D) | 142 mm x 100 mm x 92 mm |
| Weight | Approx. 960 g |
| Protection Rating | IP20 |
| Power Supply | 24 VDC (-15 % / +20 %) |
When should I choose the CX5130-N031 over a non-terminated model?
The CX5130-N031 is designed for use at the physical end of an RS485 daisy chain. If your controller is the final node in a serial network, the internal 120-ohm termination is required to prevent data corruption. If the controller is in the middle of a bus, you should use a model with termination OFF.
What TwinCAT 3 platform level does this unit support?
The CX5130 typically operates at the Performance (40) platform level. This provides sufficient power for demanding PLC, HMI, and basic Motion Control applications within the TwinCAT 3 environment.
Is the RS485 port suitable for Modbus RTU?
Yes. The RS485 interface is a standard physical layer for Modbus RTU. Using the TwinCAT PLC Serial Communication library, the CX5130-N031 can act as a Modbus Master or Slave to communicate with drives, power meters, or third-party controllers.
Network Topology Placement: Ensure this unit is positioned at either the start or the end of the RS485 run. Incorrect placement of a terminated node in the middle of a segment will cause impedance mismatch and communication errors.
Thermal Clearances: For optimal fanless cooling, the unit must be mounted horizontally on the DIN rail. Maintain at least 30 mm of clearance above and below the cooling fins to allow for natural convection, especially when the ambient temperature approaches 60 Celsius.
Bus Integration: The CX5130-N031 automatically detects the I/O bus type. When expanding the system, ensure the total current consumption from the E-bus/K-bus does not exceed the controller's supply limit (typically 2 A). If exceeded, a power feed terminal (EL9410 or similar) must be added.
The CX5130-N031 offers a superior performance-to-size ratio. Its 1.75 GHz multi-core processor allows it to handle significantly higher data throughput and faster cycle times than entry-level embedded PCs. Built with high vibration and shock resistance (conforming to EN 60068-2-6/27), it is designed for continuous operation in the most demanding B2B industrial environments. The combination of pre-configured RS485 termination and automatic bus detection reduces commissioning complexity, making it a highly reliable and flexible solution for modern machine control and industrial networking.
Global Express Shipping
Returns & Warranty
Manufacturer: BECKHOFF
Product No.: CX5130-N031
Country of origin:Germany
Product Type: Embedded PC with Intel Atom® processor
Payment: T/T, Western Union
Weight: 500g
Shipping port: Xiamen
Warranty: 12 months
The CX5130-N031 (CX5130N031) is a high-performance, fanless Embedded PC designed for DIN rail mounting, powered by a robust Intel Atom® multi-core processor with a 1.75 GHz clock frequency. This specific model features a factory-integrated RS485 interface via a 9-pin D-sub socket, pre-configured as an end point with internal termination ON.
As a middle-tier powerhouse in the CX5100 series, the CX5130-N031 is engineered for B2B industrial automation applications requiring significant computational power, such as multi-axis motion control, complex gateway functions, and high-level communication tasks. By consolidating high-speed EtherCAT I/O control with a hardware-terminated serial port, it provides a specialized solution for connecting legacy serial networks (Modbus RTU, etc.) to modern Industry 4.0 environments.
The CX5130-N031 is technically optimized for RS485 bus integrity at the physical layer. The termination on configuration means the internal 120-ohm resistor is engaged, effectively suppressing signal reflections. Configured without echo (half-duplex), it is ready for high-speed, 2-wire serial communication.
The device architecture supports the automatic recognition of both E-bus (EtherCAT) and K-bus (Bus Terminals), allowing users to switch between I/O technologies without changing the CPU. With its multi-core Intel Atom® CPU, the CX5130 provides a substantial performance boost over the CX5120 series, enabling more complex TwinCAT 3 PLC tasks and larger process images while maintaining a fanless, maintenance-free design.
| Attribute | Specification Details |
| Model | CX5130-N031 |
| Brand | BECKHOFF |
| Processor | Intel Atom® (1.75 GHz, Multi-core) |
| Interface Type | 1 x RS485 |
| Connection Port | 9-pin D-sub socket |
| RS485 Config | End point, without echo, Termination ON |
| Expansion Bus | Automatic E-bus / K-bus recognition |
| Cooling | Fanless (Passive Convection) |
| Operating Temp | -25 to +60 Celsius |
| Storage Temp | -40 to +85 Celsius |
| Dimensions (W x H x D) | 142 mm x 100 mm x 92 mm |
| Weight | Approx. 960 g |
| Protection Rating | IP20 |
| Power Supply | 24 VDC (-15 % / +20 %) |
When should I choose the CX5130-N031 over a non-terminated model?
The CX5130-N031 is designed for use at the physical end of an RS485 daisy chain. If your controller is the final node in a serial network, the internal 120-ohm termination is required to prevent data corruption. If the controller is in the middle of a bus, you should use a model with termination OFF.
What TwinCAT 3 platform level does this unit support?
The CX5130 typically operates at the Performance (40) platform level. This provides sufficient power for demanding PLC, HMI, and basic Motion Control applications within the TwinCAT 3 environment.
Is the RS485 port suitable for Modbus RTU?
Yes. The RS485 interface is a standard physical layer for Modbus RTU. Using the TwinCAT PLC Serial Communication library, the CX5130-N031 can act as a Modbus Master or Slave to communicate with drives, power meters, or third-party controllers.
Network Topology Placement: Ensure this unit is positioned at either the start or the end of the RS485 run. Incorrect placement of a terminated node in the middle of a segment will cause impedance mismatch and communication errors.
Thermal Clearances: For optimal fanless cooling, the unit must be mounted horizontally on the DIN rail. Maintain at least 30 mm of clearance above and below the cooling fins to allow for natural convection, especially when the ambient temperature approaches 60 Celsius.
Bus Integration: The CX5130-N031 automatically detects the I/O bus type. When expanding the system, ensure the total current consumption from the E-bus/K-bus does not exceed the controller's supply limit (typically 2 A). If exceeded, a power feed terminal (EL9410 or similar) must be added.
The CX5130-N031 offers a superior performance-to-size ratio. Its 1.75 GHz multi-core processor allows it to handle significantly higher data throughput and faster cycle times than entry-level embedded PCs. Built with high vibration and shock resistance (conforming to EN 60068-2-6/27), it is designed for continuous operation in the most demanding B2B industrial environments. The combination of pre-configured RS485 termination and automatic bus detection reduces commissioning complexity, making it a highly reliable and flexible solution for modern machine control and industrial networking.
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Color pattern |
Silver
|
| Country of origin |
Germany
|
Replacing a 1756-L73 does not automatically mean upgrading its firmware. This guide compares v19.013, v21.011 and v31.011, focusing on project compatibility, HMI communications, legacy networks and...
Implement a 3-SPST switch XOR light circuit in LogixPro or RSLogix 500 using an internal relay bit. Includes truth tables, boolean equations, and verified.
Integrate Allen-Bradley CompactLogix, Caterpillar ATS, and generators into DeltaV DCS over Modbus RTU. Covers ProSoft MVI69-MCM, Miille DIN266 gateways.
ONS instruction fires but the OTE coil never latches in Studio 5000 because the one-shot is only true for one scan. Use OTL/OTU or seal-in logic instead.
Configure Allen-Bradley Kinetix 5500 servo drives on EtherNet/IP. Covers CIP Sync, IEEE 1588 V2 timing, Stratix selection, DLR topology, and HMI.
A moving-average filter is the sliding-window smoother most instrument engineers drop into DCS and PLC analog paths. Here is how the window works, how N and sample time set lag, and when a...
