Description

The Siemens 6AV7800-0BA01-1AB0 is a SIMATIC Panel PC 677 designed for industrial human-machine interface (HMI) and control applications. This unit features a 12-inch color touch screen with an 800x600 pixel resolution, providing a clear interface for machine operation and process visualization. It is powered by an Intel Celeron M 370 processor at 1.5 GHz and is equipped with 256 MB of DDR266 SDRAM. For storage, it includes a 160 GB SATA hard drive and a DVD-ROM drive. The system comes pre-installed with Windows 2000 Professional (MUI) and includes a convenient front-side USB port for peripheral access.

Features

• 12-inch color TFT display with resistive touch screen
• Display resolution of 800 x 600 pixels
• Intel Celeron M 370 processor (1.5 GHz, 400 MHz FSB)
• 256 MB DDR266 SDRAM installed
• 160 GB internal 3.5-inch SATA hard drive
• Integrated DVD-ROM optical drive
• Front-accessible USB interface for easy device connection
• Wide-range power supply input from 110V to 230V AC
• Pre-installed with Windows 2000 Professional Multi-User Interface (MUI)

Applications

• Legacy system HMI replacement and maintenance
• Process visualization and control
• Machine-level data acquisition and logging
• Factory automation control panels
• Supervisory control stations

Technical Specifications

Installation Guidelines

1. 1 Ensure all power to the enclosure is de-energized and locked-out/tagged-out (LOTO) before beginning installation. Verify the absence of voltage.
2. 2 Verify the panel cutout dimensions are correct for the PC 677 chassis. Ensure the mounting surface is clean, flat, and can support the unit's weight.
3. 3 Insert the Panel PC into the cutout from the front. Secure it from the rear using all provided mounting clamps, tightening them evenly to ensure a proper seal.
4. 4 Connect a low-impedance protective earth (PE) conductor to the designated grounding terminal on the chassis. This connection must be made first.
5. 5 Connect the 110-230V AC power supply cable to the unit's power input connector. Ensure the power source is stable and within the specified voltage range.
6. 6 Connect all required communication and peripheral cables (e.g., Ethernet, serial, keyboard). After all connections are secure, remove the LOTO and re-apply power to the enclosure.