Manufacturer: Bently Nevada
Product No.: 3500/42E 289837-01
Country of origin:United States
Product Type: Proximitor/Seismic I/O Module
Barcode: 8537101190
Payment: T/T, Western Union
Weight: 680g
Dimensions: 208.28 mm x 48.26 mm x 127 mm
Shipping port: Xiamen
Warranty: 12 months
The 289837-01 is a high-performance Proximitor/Seismic I/O Module designed specifically for the Bently Nevada 3500 ENCORE Machinery Protection System. This module serves as the critical rear-panel interface for the 3500/42E Vibration Monitor, facilitating the connection of up to four channels of proximity or seismic transducers. Deployed extensively in power generation, oil and gas, and mining sectors, the 289837-01 enables the monitoring of vital machinery parameters including radial vibration, thrust position, and eccentricity. By providing reliable signal conditioning and transmission to the main processor, this I/O module ensures continuous machinery protection and high-fidelity data acquisition. It is an essential component for facilities transitioning from legacy 3300 systems to the ENCORE platform, allowing for modernized vibration monitoring without sacrificing the integrity of field wiring.
The 289837-01 I/O module is engineered to support the dual-architecture capabilities of the 3500 ENCORE series, ensuring maximum flexibility for vibration and position monitoring.
Four-Channel Capability: When utilized in a standard 3500 ENCORE System Rack, the module supports four independent channels, programmed in pairs (Channels 1 & 2; Channels 3 & 4) to perform specific monitoring functions.
Transducer Versatility: Compatible with a wide array of sensors, including proximity probes for fluid-film bearing measurements and seismic transducers (accelerometers or velocity sensors) for casing vibration.
System Integration: In a 3500 ENCORE System configuration, the I/O module interfaces with logic-programmable Relay Modules to drive machinery trip circuits based on user-defined Alert and Danger setpoints.
Conditioning Logic: Each channel processes raw transducer signals into "static values," providing operations personnel with real-time machinery health diagnostics for both steady-state and transient conditions.
| Attribute | Specification |
| Model | 289837-01 |
| Brand | Bently Nevada |
| Series | 3500 ENCORE |
| Module Type | Proximitor/Seismic I/O Module |
| Channel Support | 4 Channels (System Mode) / 2 Channels (Rack Upgrade) |
| Operating Temp | -20 to +65 deg C |
| Storage Temp | -40 to +85 deg C |
| Humidity | 95 percent non-condensing |
| Weight | 0.68 kg |
| Dimensions | 208.28 mm x 48.26 mm x 127 mm |
Can the 289837-01 be used as a direct spare for 3300 series I/O modules?
No. While the 3500 ENCORE system is designed to upgrade 3300 monitors, the 289837-01 is specifically intended for use in the 3500 ENCORE System Rack. For "Rack Upgrade" configurations where the 3300 chassis remains, the system utilizes the pre-existing 3300 series I/O.
Does this I/O module support both radial vibration and thrust position simultaneously?
Yes. Since channels are programmed in pairs, you can configure Channels 1 and 2 for radial vibration while Channels 3 and 4 are configured for thrust position (or any other supported function) within the same 3500/42E monitor.
How does the module handle signal faults such as a disconnected sensor?
The 3500/42E monitor, interfacing through the 289837-01, continuously performs self-tests. If a transducer signal fails or field wiring is compromised, the monitor will flag a "Not OK" status, preventing false trips and alerting maintenance via the 3500 Rack Configuration Software.
Wiring and Shielding: When connecting Proximitor or Seismic sensors to the 289837-01 terminals, ensure that cable shields are terminated only at the I/O module ground. Do not ground shields at the transducer end to prevent ground loops, which can introduce noise and compromise vibration measurement accuracy.
Installation Torquing: Ensure that the I/O module is fully seated into the rear of the ENCORE rack and that the mounting screws are tightened to secure the module against the backplane. This is critical for maintaining signal integrity in high-vibration environments typical of compressor decks or turbine halls.
Environmental Protection: While the module is rated for up to 95 percent non-condensing humidity, it should always be installed in a NEMA 4 or IP65 rated enclosure if located in areas with high moisture or corrosive chemicals. Ensure adequate airflow within the rack to maintain the operating temperature below the 65 deg C threshold.
Configuration Verification: After replacing an I/O module, always use the 3500 Rack Configuration Software to verify that the channel pairings and transducer types match the field-installed sensors. Perform a loop check to ensure that Alert and Danger setpoints are correctly driving the associated Relay Modules.
Global Express Shipping
Returns & Warranty
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Color pattern |
Silver
|
| Country of origin |
United States
|
Before moving a TwinCAT 3 license with a Beckhoff C9900-L100, verify the TwinCAT build, XML device description, exact order code and cabinet limits.
A field checklist for replacing a Beckhoff EL4032, covering the ±10 V load, terminal map, power contacts, EtherCAT state, and watchdog behavior.
Before replacing a Yokogawa AAI835, verify the 4-in/4-out channel map, power-loss loop behavior, barrier type, output load, cable, and redundancy.
ABB PM891K01 article 3BSE053241R1 is the non-redundant AC 800M processor kit. Use this field checklist before replacement.
Replacement checks for ABB TP853 3BSE018126R1: identify the installed CI853, CI855, CI857, or CI861 interface, record wiring, and verify communication after installation.
Engineering checks for the Allen-Bradley 5069-L330ERMS2: controller capacity, separate RTB kits, local I/O limits, network-node limits, and motion-axis count.
