330103-00-14-10-02-05 specifies this 3300 XL 8 mm proximity probe configuration featuring an M10 x 1 metric thread, 0 mm unthreaded length, 140 mm overall case length, and a 1.0 meter total length. This specific configuration uses a standard miniature coaxial ClickLoc connector (Option 02) without a connector protector and is certified under Option 05 for CSA, ATEX, and IECEx hazardous area operations. As an unarmored metric probe, it mounts directly into threaded ports on rotating machinery to measure shaft vibration, axial position, and oil film thickness.
Operating as a non-contact eddy-current transducer, the probe pairs with a 3300 XL Proximitor sensor and a matching extension cable to form a complete transducer system. The total length of 1.0 meter is specifically configured to combine with a 4.0 meter or 8.0 meter extension cable, establishing a calibrated 5.0 meter or 9.0 meter overall system length. By monitoring physical gap variations between the 8.0 mm probe tip and the target shaft, the system outputs an analog voltage directly proportional to the physical displacement.
Typical applications include radial vibration and axial thrust position monitoring on high-speed rotating equipment in petrochemical, power generation, and natural gas industries. It is commonly installed in steam turbines, gas turbines, centrifugal compressors, gearboxes, and large industrial pumps to monitor shaft movement and prevent catastrophic machinery damage.
| Option / Segment | Code Value | Meaning / Configuration |
|---|---|---|
| Base Model | 330103 | 3300 XL 8 mm Proximity Probe, M10 x 1 thread, without armor |
| A - Unthreaded Length | 00 | 0 mm unthreaded length (fully threaded body) |
| B - Overall Case Length | 14 | 140 mm overall case length (ordered in 10 mm increments) |
| C - Total Length | 10 | 1.0 meter (3.3 feet) total length |
| D - Connector/Cable Option | 02 | Miniature coaxial ClickLoc connector, standard cable |
| E - Agency Approval | 05 | CSA, ATEX, IECEx hazardous area approvals |
| Manufacturer | Bently Nevada (Baker Hughes) |
| Part Number | 330103-00-14-10-02-05 |
| Product Series | 3300 XL 8 mm Proximity Transducer System |
| Thread Type | Metric M10 x 1 (fully threaded) |
| Case Length | 140 mm |
| Unthreaded Length | 0 mm |
| Cable Type | 75 ohm coaxial, standard, unarmored |
| Cable Length | 1.0 meter (3.3 feet) |
| Connector Type | Miniature coaxial ClickLoc male connector |
| Scale Factor | 7.87 V/mm (200 mV/mil) when paired with 3300 XL Proximitor sensor |
| Linear Range | 2.0 mm (80 mils), starting at 0.25 mm (10 mils) from the probe tip |
| Operating Temperature | -52 degC to +177 degC |
| Excitation Voltage | Requires -17.5 Vdc to -26 Vdc (supplied by Proximitor sensor) |
| Max Thread Torque | 15 N-m (11 ft-lb) |
| Weight | 0.15 kg |
| Dimensions | 17 mm x 17 mm x 140 mm (H x W x D) |
To establish successful installation, maintain a minimum spacing of at least 40 mm between adjacent proximity probe tips to prevent electromagnetic cross-talk. When threading the M10 x 1 probe body into the machine casing, do not exceed the maximum tightening torque of 15 N-m. Hand-tighten the ClickLoc coaxial connection first, then slide the connector sleeve to lock. Ensure that the coaxial cable bend radius is at least 25 mm to prevent mechanical fatigue or conductor breakages under machine casing vibration.
Global Express Shipping
Returns & Warranty
Manufacturer: Bently Nevada
Product No.: 330103-00-14-10-02-05
Country of origin:United States
Product Type: 3300 XL 8 mm Proximity Probe
Barcode: 8537101190
Payment: T/T, Western Union
Weight: 150g
Dimensions: 17 mm x 17 mm x 140 mm (H x W x D)
Shipping port: Xiamen
Warranty: 12 months
330103-00-14-10-02-05 specifies this 3300 XL 8 mm proximity probe configuration featuring an M10 x 1 metric thread, 0 mm unthreaded length, 140 mm overall case length, and a 1.0 meter total length. This specific configuration uses a standard miniature coaxial ClickLoc connector (Option 02) without a connector protector and is certified under Option 05 for CSA, ATEX, and IECEx hazardous area operations. As an unarmored metric probe, it mounts directly into threaded ports on rotating machinery to measure shaft vibration, axial position, and oil film thickness.
Operating as a non-contact eddy-current transducer, the probe pairs with a 3300 XL Proximitor sensor and a matching extension cable to form a complete transducer system. The total length of 1.0 meter is specifically configured to combine with a 4.0 meter or 8.0 meter extension cable, establishing a calibrated 5.0 meter or 9.0 meter overall system length. By monitoring physical gap variations between the 8.0 mm probe tip and the target shaft, the system outputs an analog voltage directly proportional to the physical displacement.
Typical applications include radial vibration and axial thrust position monitoring on high-speed rotating equipment in petrochemical, power generation, and natural gas industries. It is commonly installed in steam turbines, gas turbines, centrifugal compressors, gearboxes, and large industrial pumps to monitor shaft movement and prevent catastrophic machinery damage.
| Option / Segment | Code Value | Meaning / Configuration |
|---|---|---|
| Base Model | 330103 | 3300 XL 8 mm Proximity Probe, M10 x 1 thread, without armor |
| A - Unthreaded Length | 00 | 0 mm unthreaded length (fully threaded body) |
| B - Overall Case Length | 14 | 140 mm overall case length (ordered in 10 mm increments) |
| C - Total Length | 10 | 1.0 meter (3.3 feet) total length |
| D - Connector/Cable Option | 02 | Miniature coaxial ClickLoc connector, standard cable |
| E - Agency Approval | 05 | CSA, ATEX, IECEx hazardous area approvals |
| Manufacturer | Bently Nevada (Baker Hughes) |
| Part Number | 330103-00-14-10-02-05 |
| Product Series | 3300 XL 8 mm Proximity Transducer System |
| Thread Type | Metric M10 x 1 (fully threaded) |
| Case Length | 140 mm |
| Unthreaded Length | 0 mm |
| Cable Type | 75 ohm coaxial, standard, unarmored |
| Cable Length | 1.0 meter (3.3 feet) |
| Connector Type | Miniature coaxial ClickLoc male connector |
| Scale Factor | 7.87 V/mm (200 mV/mil) when paired with 3300 XL Proximitor sensor |
| Linear Range | 2.0 mm (80 mils), starting at 0.25 mm (10 mils) from the probe tip |
| Operating Temperature | -52 degC to +177 degC |
| Excitation Voltage | Requires -17.5 Vdc to -26 Vdc (supplied by Proximitor sensor) |
| Max Thread Torque | 15 N-m (11 ft-lb) |
| Weight | 0.15 kg |
| Dimensions | 17 mm x 17 mm x 140 mm (H x W x D) |
To establish successful installation, maintain a minimum spacing of at least 40 mm between adjacent proximity probe tips to prevent electromagnetic cross-talk. When threading the M10 x 1 probe body into the machine casing, do not exceed the maximum tightening torque of 15 N-m. Hand-tighten the ClickLoc coaxial connection first, then slide the connector sleeve to lock. Ensure that the coaxial cable bend radius is at least 25 mm to prevent mechanical fatigue or conductor breakages under machine casing vibration.
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
Implement a 3-SPST switch XOR light circuit in LogixPro or RSLogix 500 using an internal relay bit. Includes truth tables, boolean equations, and verified.
Integrate Allen-Bradley CompactLogix, Caterpillar ATS, and generators into DeltaV DCS over Modbus RTU. Covers ProSoft MVI69-MCM, Miille DIN266 gateways.
ONS instruction fires but the OTE coil never latches in Studio 5000 because the one-shot is only true for one scan. Use OTL/OTU or seal-in logic instead.
Configure Allen-Bradley Kinetix 5500 servo drives on EtherNet/IP. Covers CIP Sync, IEEE 1588 V2 timing, Stratix selection, DLR topology, and HMI.
A moving-average filter is the sliding-window smoother most instrument engineers drop into DCS and PLC analog paths. Here is how the window works, how N and sample time set lag, and when a...
On Frame 5–9 gas turbines, GE Mark VI and Mark VIe run control as function-block application software. This article maps process, protection, and sequencing functions—and what Toolbox ST access...
