330103-00-16-10-01-00: 3300 XL 8 mm proximity probe, M10 x 1 metric thread, Option 00 fully threaded body (0 mm unthreaded length), Option 16 160 mm case length, Option 10 1.0 m total length, Option 01 miniature coaxial ClickLoc connector with connector protector, standard cable, Option 00 no agency approvals.
This specific configuration incorporates a factory-installed connector protector (Option 01) to safeguard the ClickLoc connection against environmental contaminants and mechanical stress during operation, contrasting with option 02 variants that omit the protector. The 1.0-meter integrated standard cable functions as the initial link in a 5-meter or 9-meter transducer loop, pairing with a 3300 XL extension cable and 3300 XL Proximitor sensor for non-contact shaft vibration and displacement measurements.
| Option | Code on This SKU | Description |
|---|---|---|
| Orderable Part Number | 330103-00-16-10-01-00 | 3300 XL 8 mm proximity probe, M10 x 1 metric thread, without armor |
| Option A - Unthreaded Length | 00 | 0 mm (fully threaded body) |
| Option B - Overall Case Length | 16 | 160 mm case length |
| Option C - Total Length | 10 | 1.0 meter (3.3 feet) total length |
| Option D - Connector and Cable-Type | 01 | Miniature coaxial ClickLoc connector with connector protector, standard cable |
| Option E - Agency Approval | 00 | Not required (general purpose/unapproved) |
| Manufacturer | Bently Nevada |
| Part Number | 330103-00-16-10-01-00 |
| Product Type | 3300 XL 8 mm Proximity Probe, Metric |
| Thread Size | M10 x 1 |
| Armor Option | Without armor |
| Unthreaded Length | 0 mm |
| Case Length | 160 mm |
| Total Cable Length | 1.0 m (3.3 ft) |
| Connector Type | Miniature male coaxial ClickLoc |
| Connector Protector | Yes (Option 01) |
| Cable Type | Standard coaxial cable |
| Tip Diameter | 8.0 mm (0.31 in) |
| Tip Material | Polyphenylene sulfide (PPS) |
| Case Material | AISI 303 stainless steel |
| Operating Temperature Range | -52 degC to +177 degC |
| Probe Pressure Seal Limit | Viton O-ring |
| Nominal Probe DC Resistance | 7.59 ohms (plus/minus 0.50 ohms) |
| Thread Engagement Limit | Maximum 15 mm |
| Weight | 0.14 kg |
| Dimensions | 160 mm x 10 mm x 10 mm (H x W x D) |
| Connector Component | Wiring Function |
|---|---|
| Center Conductor | Signal / Vibration AC and DC voltage |
| Outer Shield / Coaxial Body | Common / System ground return |
Always verify the electrical "click" connection when mating the probe to the extension cable. Ensure that the M10 x 1 threads do not exceed 15 mm of engagement to avoid binding. The probe body must be installed within safe-area environmental conditions as specified by Option 00. Maintain a minimum bend radius of 25.4 mm (1.0 in) on the integrated coaxial cable during routing to prevent signal attenuation.
Global Express Shipping
Returns & Warranty
Manufacturer: Bently Nevada
Product No.: 330103-00-16-10-01-00
Country of origin:United States
Product Type: 3300 XL 8 mm Proximity Probe
Barcode: 8537101190
Payment: T/T, Western Union
Weight: 140g
Dimensions: 160 mm x 10 mm x 10 mm (H x W x D)
Shipping port: Xiamen
Warranty: 12 months
330103-00-16-10-01-00: 3300 XL 8 mm proximity probe, M10 x 1 metric thread, Option 00 fully threaded body (0 mm unthreaded length), Option 16 160 mm case length, Option 10 1.0 m total length, Option 01 miniature coaxial ClickLoc connector with connector protector, standard cable, Option 00 no agency approvals.
This specific configuration incorporates a factory-installed connector protector (Option 01) to safeguard the ClickLoc connection against environmental contaminants and mechanical stress during operation, contrasting with option 02 variants that omit the protector. The 1.0-meter integrated standard cable functions as the initial link in a 5-meter or 9-meter transducer loop, pairing with a 3300 XL extension cable and 3300 XL Proximitor sensor for non-contact shaft vibration and displacement measurements.
| Option | Code on This SKU | Description |
|---|---|---|
| Orderable Part Number | 330103-00-16-10-01-00 | 3300 XL 8 mm proximity probe, M10 x 1 metric thread, without armor |
| Option A - Unthreaded Length | 00 | 0 mm (fully threaded body) |
| Option B - Overall Case Length | 16 | 160 mm case length |
| Option C - Total Length | 10 | 1.0 meter (3.3 feet) total length |
| Option D - Connector and Cable-Type | 01 | Miniature coaxial ClickLoc connector with connector protector, standard cable |
| Option E - Agency Approval | 00 | Not required (general purpose/unapproved) |
| Manufacturer | Bently Nevada |
| Part Number | 330103-00-16-10-01-00 |
| Product Type | 3300 XL 8 mm Proximity Probe, Metric |
| Thread Size | M10 x 1 |
| Armor Option | Without armor |
| Unthreaded Length | 0 mm |
| Case Length | 160 mm |
| Total Cable Length | 1.0 m (3.3 ft) |
| Connector Type | Miniature male coaxial ClickLoc |
| Connector Protector | Yes (Option 01) |
| Cable Type | Standard coaxial cable |
| Tip Diameter | 8.0 mm (0.31 in) |
| Tip Material | Polyphenylene sulfide (PPS) |
| Case Material | AISI 303 stainless steel |
| Operating Temperature Range | -52 degC to +177 degC |
| Probe Pressure Seal Limit | Viton O-ring |
| Nominal Probe DC Resistance | 7.59 ohms (plus/minus 0.50 ohms) |
| Thread Engagement Limit | Maximum 15 mm |
| Weight | 0.14 kg |
| Dimensions | 160 mm x 10 mm x 10 mm (H x W x D) |
| Connector Component | Wiring Function |
|---|---|
| Center Conductor | Signal / Vibration AC and DC voltage |
| Outer Shield / Coaxial Body | Common / System ground return |
Always verify the electrical "click" connection when mating the probe to the extension cable. Ensure that the M10 x 1 threads do not exceed 15 mm of engagement to avoid binding. The probe body must be installed within safe-area environmental conditions as specified by Option 00. Maintain a minimum bend radius of 25.4 mm (1.0 in) on the integrated coaxial cable during routing to prevent signal attenuation.
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
Implement a 3-SPST switch XOR light circuit in LogixPro or RSLogix 500 using an internal relay bit. Includes truth tables, boolean equations, and verified.
Integrate Allen-Bradley CompactLogix, Caterpillar ATS, and generators into DeltaV DCS over Modbus RTU. Covers ProSoft MVI69-MCM, Miille DIN266 gateways.
ONS instruction fires but the OTE coil never latches in Studio 5000 because the one-shot is only true for one scan. Use OTL/OTU or seal-in logic instead.
Configure Allen-Bradley Kinetix 5500 servo drives on EtherNet/IP. Covers CIP Sync, IEEE 1588 V2 timing, Stratix selection, DLR topology, and HMI.
A moving-average filter is the sliding-window smoother most instrument engineers drop into DCS and PLC analog paths. Here is how the window works, how N and sample time set lag, and when a...
On Frame 5–9 gas turbines, GE Mark VI and Mark VIe run control as function-block application software. This article maps process, protection, and sequencing functions—and what Toolbox ST access...
