Bently Nevada 330104-00-10-10-02-CN 3300 XL 8 mm Proximity Probe

Description

Fully threaded M10 x 1 metric probe body (Option 00 unthreaded) with a 100 mm case (Option 10) and a 1.0 m armored cable (Option 10) specifies this 3300 XL 8 mm proximity probe configuration — 330104-00-10-10-02-CN. This eddy-current probe is part of the 3300 XL 8 mm Proximity Transducer System and operates as a non-contact sensor to measure both static displacement and dynamic shaft vibration. It features a polyphenylene sulfide tip and a metrically threaded stainless steel case with flexible stainless steel armor to shield the internal coaxial cable from abrasive and aggressive industrial conditions.

This configuration incorporates Option 02, signifying a miniature coaxial ClickLoc connector on standard cable, and is optimized for use with standard 3300 XL extension cables. The system exhibits interchangeability, enabling connection to 3300 XL Proximitor sensors without requiring individual calibration. The trailing -CN suffix ensures complete compliance with the China hazardous area approval package, certifying the sensor for deployment in Chinese petrochemical, power generation, and heavy manufacturing installations requiring NEPSI and CCC certifications.

Features

• M10 x 1 metric thread design with 0 mm unthreaded length and 100 mm overall case length.
• Integrated flexible stainless steel armor provides mechanical protection for cable routing in demanding paths.
• Miniature male coaxial ClickLoc connector delivers a secure, low-loss connection with an audible and tactile click.
• 75-ohm coaxial probe cable has a 1.0 meter total length for standard transducer chain configuration.
• Certified with the -CN suffix, meeting NEPSI and CCC hazardous area requirements in China.

Applications

• Radial shaft vibration monitoring on steam turbines, gas turbines, and industrial compressors.
• Axial thrust position and casing expansion tracking on large rotating machinery.
• Eccentricity measurements in utility power generation equipment.
• Keyphasor phase and speed reference tracking on high-speed industrial fans and blowers.
• Machinery condition monitoring in Chinese manufacturing environments requiring CCC/NEPSI approvals.

Ordering Information

Technical Specifications

Installation Guidelines

• Keep a minimum clearance of 20 mm around the probe tip from adjacent metal structures to prevent target signal interference.
• Install the metric M10 x 1 case using a maximum torque of 13.5 N-m (120 in-lb).
• Ensure the miniature ClickLoc coaxial connectors are joined finger-tight; do not utilize pliers or metal tools.
• Maintain a minimum bend radius of 38.1 mm (1.5 in) for the armored probe cable during routing.
• Ensure the cable shielding is tied to instrument ground exclusively at the Proximitor sensor end.

Compliance and Certifications

• NEPSI certified for hazardous area installations in China.
• CCC (China Compulsory Certification) compliant.
• CE compliant.
• RoHS compliant.