Bently Nevada 330104-00-12-10-02-00 3300 XL 8 mm Proximity Probe

Description

330104-00-12-10-02-00 specifies this 3300 XL 8 mm proximity probe configuration, featuring metric M10 x 1 threads, an integrated stainless steel armor sleeve, a 120 mm fully threaded case length, a 1.0 m total cable length, and a standard miniature coaxial ClickLoc connector.

This transducer measures static (position) and dynamic (vibration) values on fluid-film bearing machinery, such as shaft vibration, axial rotor position, and rotational speed. The integrated stainless steel armor provides mechanical protection for the FEP-insulated coaxial cable, protecting it from abrasion and physical damage in harsh operating environments. This specific variant uses a standard cable with a ClickLoc connector, requires no connector protector, and does not carry hazardous area certifications.

Features

• Thread Type: Metric M10 x 1 threaded body.
• Mechanical Protection: Integrated stainless steel protective armor ferrule and sleeve over standard cable.
• Unthreaded Length (Option 00): 0 mm unthreaded section, establishing a fully threaded case.
• Overall Case Length (Option 12): 120 mm overall case length for deep-mount penetration.
• Total Length (Option 10): 1.0 meter (3.3 feet) total cable length.
• Connector Option (Option 02): Miniature coaxial ClickLoc connector without a connector protector.
• Agency Approval (Option 00): Standard industrial variant with no hazardous area approvals required.
• Interchangeability: Interchangeable with other 3300 XL 8 mm components, eliminating the need for custom bench calibration.

Applications

• Shaft radial vibration monitoring on fluid-film bearings
• Thrust position (axial displacement) measurement
• Rotational speed and Keyphasor reference measurements
• Continuous machinery protection systems on steam turbines, gas turbines, compressors, and industrial pumps

Ordering Information

Technical Specifications

Installation Guidelines

• Thread Engagement Limits: For M10 x 1 threads, ensure the thread engagement depth does not exceed 15 mm to avoid binding during installation.
• Cable Routing: Maintain the minimum coaxial cable bend radius of 25.4 mm (1.0 in) during routing to prevent attenuation or conductor damage.
• Gap Setting: Calibrate the physical probe gap using the voltage output from the Proximitor sensor. The nominal calibration target is typically -10.0 Vdc.
• Installation Torque: Do not exceed the maximum installation torque rating of 7.3 N-m (65 in-lb) for M10 x 1 probe bodies.
• Connector Security: Ensure ClickLoc coaxial connectors are finger-tight during final assembly.

Compliance and Certifications

• CE Mark: Compliant with applicable European Union Directives.
• RoHS: Compliant with Directive 2011/65/EU restricting hazardous substances.