Option 045 (4.5 m cable length) and Option 02 (standard cable with connector protector) specify this 3300 XL standard extension cable configuration — 330130-045-02-00. This non-armored standard cable matches with a 3300 XL 8 mm proximity probe and Proximitor sensor to form a complete 5-meter or 9-meter transducer system (when combined with a 0.5-meter probe). The integrated connector protector provides environmental shielding for the miniature coaxial ClickLoc connection, protecting standard operations on fluid-film bearing machinery.
Compared to the unshielded connector option (Option 00) or armored versions (Option 01 and Option 03), the Option 02 configuration includes a pre-installed fluorosilicone connector protector on the female connector end without the extra weight of stainless steel armor. This option is suitable for installations where physical routing is standard but connector environmental protection is desired.
| Option Segment | Code | Description |
|---|---|---|
| Orderable Part Number | 330130-045-02-00 | 3300 XL Standard Extension Cable |
| Option AAA: Cable Length | 045 | 4.5 meters (14.8 feet) |
| Option BB: Connector Protector and Cable | 02 | Standard cable with connector protector |
| Option CC: Agency Approval | 00 | Not required |
| Parameter | Specification |
|---|---|
| Manufacturer | Bently Nevada |
| Part Number | 330130-045-02-00 |
| Product Type | 3300 XL Standard Extension Cable |
| Cable Length | 4.5 meters (14.8 feet) |
| Cable Type | 75 ohm triaxial, non-armored |
| Insulation Material | Fluoroethylene propylene (FEP) |
| Connector Protector | Pre-installed fluorosilicone boot (female end) |
| Connectors | Gold-plated ClickLoc coaxial (1 male, 1 female) |
| Core Resistance (R_CORE) | 0.99 +/- 0.15 ohms (center-to-center conductor) |
| Jacket Resistance (R_JACKET) | 0.30 +/- 0.06 ohms (outer-to-outer conductor) |
| Cable Capacitance | 69.9 pF/m (21.3 pF/ft) typical |
| Minimum Bend Radius | 25.4 mm (1.0 in) |
| Tensile Strength | 330 N (75 lbf) maximum rated pull strength (connector to cable) |
| Connector Torque (Max) | 0.565 N-m (5 in-lbf) |
| Operating and Storage Temperature | -52 degC to +177 degC (-62 degF to +350 degF) |
| Weight | 0.18 kg |
| Dimensions | 200 mm x 200 mm x 30 mm (H x W x D) |
Maintain the minimum bend radius of 25.4 mm (1.0 in) along the entire cable run to avoid fracturing the internal triaxial conductors. Ensure the gold-plated ClickLoc connectors are connected finger-tight; they will provide a mechanical click once fully seated. Do not apply tools for tightening unless using an approved torque wrench set to a maximum of 0.565 N-m (5 in-lbf). Slide the pre-installed fluorosilicone connector protector over the mated connection to shield it against environmental moisture, oil, and contaminants.
Global Express Shipping
Returns & Warranty
Manufacturer: Bently Nevada
Product No.: 330130-045-02-00
Country of origin:United States
Product Type: 3300 XL Standard Extension Cable
Barcode: 8537101190
Payment: T/T, Western Union
Weight: 180g
Dimensions: 200 mm x 200 mm x 30 mm (H x W x D)
Shipping port: Xiamen
Warranty: 12 months
Option 045 (4.5 m cable length) and Option 02 (standard cable with connector protector) specify this 3300 XL standard extension cable configuration — 330130-045-02-00. This non-armored standard cable matches with a 3300 XL 8 mm proximity probe and Proximitor sensor to form a complete 5-meter or 9-meter transducer system (when combined with a 0.5-meter probe). The integrated connector protector provides environmental shielding for the miniature coaxial ClickLoc connection, protecting standard operations on fluid-film bearing machinery.
Compared to the unshielded connector option (Option 00) or armored versions (Option 01 and Option 03), the Option 02 configuration includes a pre-installed fluorosilicone connector protector on the female connector end without the extra weight of stainless steel armor. This option is suitable for installations where physical routing is standard but connector environmental protection is desired.
| Option Segment | Code | Description |
|---|---|---|
| Orderable Part Number | 330130-045-02-00 | 3300 XL Standard Extension Cable |
| Option AAA: Cable Length | 045 | 4.5 meters (14.8 feet) |
| Option BB: Connector Protector and Cable | 02 | Standard cable with connector protector |
| Option CC: Agency Approval | 00 | Not required |
| Parameter | Specification |
|---|---|
| Manufacturer | Bently Nevada |
| Part Number | 330130-045-02-00 |
| Product Type | 3300 XL Standard Extension Cable |
| Cable Length | 4.5 meters (14.8 feet) |
| Cable Type | 75 ohm triaxial, non-armored |
| Insulation Material | Fluoroethylene propylene (FEP) |
| Connector Protector | Pre-installed fluorosilicone boot (female end) |
| Connectors | Gold-plated ClickLoc coaxial (1 male, 1 female) |
| Core Resistance (R_CORE) | 0.99 +/- 0.15 ohms (center-to-center conductor) |
| Jacket Resistance (R_JACKET) | 0.30 +/- 0.06 ohms (outer-to-outer conductor) |
| Cable Capacitance | 69.9 pF/m (21.3 pF/ft) typical |
| Minimum Bend Radius | 25.4 mm (1.0 in) |
| Tensile Strength | 330 N (75 lbf) maximum rated pull strength (connector to cable) |
| Connector Torque (Max) | 0.565 N-m (5 in-lbf) |
| Operating and Storage Temperature | -52 degC to +177 degC (-62 degF to +350 degF) |
| Weight | 0.18 kg |
| Dimensions | 200 mm x 200 mm x 30 mm (H x W x D) |
Maintain the minimum bend radius of 25.4 mm (1.0 in) along the entire cable run to avoid fracturing the internal triaxial conductors. Ensure the gold-plated ClickLoc connectors are connected finger-tight; they will provide a mechanical click once fully seated. Do not apply tools for tightening unless using an approved torque wrench set to a maximum of 0.565 N-m (5 in-lbf). Slide the pre-installed fluorosilicone connector protector over the mated connection to shield it against environmental moisture, oil, and contaminants.
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
Implement a 3-SPST switch XOR light circuit in LogixPro or RSLogix 500 using an internal relay bit. Includes truth tables, boolean equations, and verified.
Integrate Allen-Bradley CompactLogix, Caterpillar ATS, and generators into DeltaV DCS over Modbus RTU. Covers ProSoft MVI69-MCM, Miille DIN266 gateways.
ONS instruction fires but the OTE coil never latches in Studio 5000 because the one-shot is only true for one scan. Use OTL/OTU or seal-in logic instead.
Configure Allen-Bradley Kinetix 5500 servo drives on EtherNet/IP. Covers CIP Sync, IEEE 1588 V2 timing, Stratix selection, DLR topology, and HMI.
A moving-average filter is the sliding-window smoother most instrument engineers drop into DCS and PLC analog paths. Here is how the window works, how N and sample time set lag, and when a...
On Frame 5–9 gas turbines, GE Mark VI and Mark VIe run control as function-block application software. This article maps process, protection, and sequencing functions—and what Toolbox ST access...
