Option 00 (0.0 in unthreaded length), Option 40 (4.0 in overall case length), Option 10 (1.0 m total length), and Option 02 (standard ClickLoc coaxial connector) define the specific physical configuration of this 3300 NSv proximity probe, part number 330901-00-40-10-02-00.
This unarmored probe configuration is designed with a standard 1/4-28 UNF-2A thread, distinguishing it from armored versions (such as the 330902) or alternative 3/8-24 UNF thread variants (such as the 330908). It is calibrated to pair with the 3300 XL NSv Proximitor Sensor (330980) and 3300 NSv Extension Cable (330930) to form a complete 5-meter or 7-meter transducer system, used for non-contact displacement monitoring in confined locations where target area geometry is limited.
| Option Segment | Code Value | Configuration Meaning |
|---|---|---|
| Orderable Part Number | 330901-00-40-10-02-00 | 3300 NSv Proximity Probe, 1/4-28 UNF thread, without armor |
| A - Unthreaded Length Option | 00 | 0.0 in (0 mm) unthreaded length (fully threaded case) |
| B - Case Length Option | 40 | 4.0 in (102 mm) overall case length |
| C - Total Length Option | 10 | 1.0 meter (39 in) total length |
| D - Connector and Cable Option | 02 | Miniature coaxial ClickLoc connector, standard cable (no connector protector) |
| E - Agency Approval Option | 00 | Agency approvals not required |
| Manufacturer | Bently Nevada |
| Part Number / SKU | 330901-00-40-10-02-00 |
| Transducer System | 3300 XL NSv Proximity Transducer System |
| Thread Size | 1/4-28 UNF-2A |
| Armor Option | Without armor |
| Unthreaded Length | 0.0 in (0 mm) |
| Case Length | 4.0 in (102 mm) |
| Total Probe Length | 1.0 m (39 in) |
| Connector Type | Miniature male coaxial ClickLoc connector, standard cable |
| Linear Range | 1.5 mm (60 mils), from approximately 0.25 mm (10 mils) to 1.75 mm (70 mils) from target |
| Incremental Scale Factor (ISF) | 7.87 V/mm (200 mV/mil) +12.5% / -20% (measured in 0.25 mm increments over 1.5 mm linear range) |
| Deviation from Best Fit Straight Line (DSL) | Less than +/-0.06 mm (+/-2.3 mils) |
| Frequency Response | 0 to 10 kHz: +0, -3 dB typical (with up to 305 meters of field wiring) |
| Recommended Gap Setting | 1.0 mm (40 mils) |
| Minimum Target Size | 8.9 mm (0.35 in) diameter flat target (recommended minimum 13 mm / 0.5 in) |
| Probe Case Torque | Recommended: 5.1 N-m (45 in-lb), Maximum rated: 7.3 N-m (65 in-lb) |
| Tensile Strength (Maximum Rated) | 220 N (50 lb) probe case to probe lead, 220 N (50 lb) probe lead to extension cable connectors |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 304 stainless steel (SST) |
| Probe Cable Material | 75 ohm coaxial, fluoroethylene propylene (FEP) insulated |
| Operating and Storage Temperature Range | -52 degC to +177 degC (-62 degF to +351 degF) |
| Pressure Sealing | Viton O-ring design to seal differential pressure between probe tip and case (avoid sustained temperatures below -34 degC) |
| Minimum Cable Bend Radius | 25.4 mm (1.0 in) |
Global Express Shipping
Returns & Warranty
Manufacturer: Bently Nevada
Product No.: 330901-00-40-10-02-00
Country of origin:United States
Product Type: 3300 NSv Proximity Probes
Barcode: 8537101190
Payment: T/T, Western Union
Weight: 120g
Dimensions: 45 mm x 90 mm x 90 mm (H x W x D)
Shipping port: Xiamen
Warranty: 12 months
Option 00 (0.0 in unthreaded length), Option 40 (4.0 in overall case length), Option 10 (1.0 m total length), and Option 02 (standard ClickLoc coaxial connector) define the specific physical configuration of this 3300 NSv proximity probe, part number 330901-00-40-10-02-00.
This unarmored probe configuration is designed with a standard 1/4-28 UNF-2A thread, distinguishing it from armored versions (such as the 330902) or alternative 3/8-24 UNF thread variants (such as the 330908). It is calibrated to pair with the 3300 XL NSv Proximitor Sensor (330980) and 3300 NSv Extension Cable (330930) to form a complete 5-meter or 7-meter transducer system, used for non-contact displacement monitoring in confined locations where target area geometry is limited.
| Option Segment | Code Value | Configuration Meaning |
|---|---|---|
| Orderable Part Number | 330901-00-40-10-02-00 | 3300 NSv Proximity Probe, 1/4-28 UNF thread, without armor |
| A - Unthreaded Length Option | 00 | 0.0 in (0 mm) unthreaded length (fully threaded case) |
| B - Case Length Option | 40 | 4.0 in (102 mm) overall case length |
| C - Total Length Option | 10 | 1.0 meter (39 in) total length |
| D - Connector and Cable Option | 02 | Miniature coaxial ClickLoc connector, standard cable (no connector protector) |
| E - Agency Approval Option | 00 | Agency approvals not required |
| Manufacturer | Bently Nevada |
| Part Number / SKU | 330901-00-40-10-02-00 |
| Transducer System | 3300 XL NSv Proximity Transducer System |
| Thread Size | 1/4-28 UNF-2A |
| Armor Option | Without armor |
| Unthreaded Length | 0.0 in (0 mm) |
| Case Length | 4.0 in (102 mm) |
| Total Probe Length | 1.0 m (39 in) |
| Connector Type | Miniature male coaxial ClickLoc connector, standard cable |
| Linear Range | 1.5 mm (60 mils), from approximately 0.25 mm (10 mils) to 1.75 mm (70 mils) from target |
| Incremental Scale Factor (ISF) | 7.87 V/mm (200 mV/mil) +12.5% / -20% (measured in 0.25 mm increments over 1.5 mm linear range) |
| Deviation from Best Fit Straight Line (DSL) | Less than +/-0.06 mm (+/-2.3 mils) |
| Frequency Response | 0 to 10 kHz: +0, -3 dB typical (with up to 305 meters of field wiring) |
| Recommended Gap Setting | 1.0 mm (40 mils) |
| Minimum Target Size | 8.9 mm (0.35 in) diameter flat target (recommended minimum 13 mm / 0.5 in) |
| Probe Case Torque | Recommended: 5.1 N-m (45 in-lb), Maximum rated: 7.3 N-m (65 in-lb) |
| Tensile Strength (Maximum Rated) | 220 N (50 lb) probe case to probe lead, 220 N (50 lb) probe lead to extension cable connectors |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 304 stainless steel (SST) |
| Probe Cable Material | 75 ohm coaxial, fluoroethylene propylene (FEP) insulated |
| Operating and Storage Temperature Range | -52 degC to +177 degC (-62 degF to +351 degF) |
| Pressure Sealing | Viton O-ring design to seal differential pressure between probe tip and case (avoid sustained temperatures below -34 degC) |
| Minimum Cable Bend Radius | 25.4 mm (1.0 in) |
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
Replacing a 1756-L73 does not automatically mean upgrading its firmware. This guide compares v19.013, v21.011 and v31.011, focusing on project compatibility, HMI communications, legacy networks and...
Implement a 3-SPST switch XOR light circuit in LogixPro or RSLogix 500 using an internal relay bit. Includes truth tables, boolean equations, and verified.
Integrate Allen-Bradley CompactLogix, Caterpillar ATS, and generators into DeltaV DCS over Modbus RTU. Covers ProSoft MVI69-MCM, Miille DIN266 gateways.
ONS instruction fires but the OTE coil never latches in Studio 5000 because the one-shot is only true for one scan. Use OTL/OTU or seal-in logic instead.
Configure Allen-Bradley Kinetix 5500 servo drives on EtherNet/IP. Covers CIP Sync, IEEE 1588 V2 timing, Stratix selection, DLR topology, and HMI.
A moving-average filter is the sliding-window smoother most instrument engineers drop into DCS and PLC analog paths. Here is how the window works, how N and sample time set lag, and when a...
