Bently Nevada 84661-30 330750 HTVS Interconnection Cable

Description

The 84661-30 is a 30 ft (9.0 m) standard armored interconnect cable engineered for use with Bently Nevada 330750 and 330752 High Temperature Velomitor Systems. This cable configuration provides essential signal transmission between the sensing head and the signal conditioning electronics, utilizing a stainless steel armor jacket over shielded 0.382 mm2 (22 AWG) conductors to ensure mechanical protection in demanding industrial environments. This cable assembly is designed for installations requiring additional abrasion resistance and protection against environmental factors. It is terminated with a moisture-resistant female connector at the HTVS (High Temperature Velomitor System) end and ring lugs at the monitor end, ensuring a secure and reliable connection within the monitoring chain.

Features

• Standard armored construction with stainless steel overwrap for superior mechanical protection
• 30 ft (9.0 m) length specifically designated by suffix -30
• Shielded 0.382 mm2 (22 AWG) conductors to minimize noise interference in vibration monitoring applications
• Moisture-resistant female connector for HTVS interface
• Ring lug termination at the monitor end for direct interface
• Operating temperature range from -29 Celsius to 121 Celsius

Applications

• Industrial machinery vibration monitoring
• High temperature velocity monitoring systems (HTVS)
• Rotating equipment protection where mechanical cable protection is required

Ordering Information

Option	Code on This SKU	Description
Orderable Part Number	84661-30	Standard armored interconnect cable
A - Cable Length	30	30 ft (9.0 m)

Technical Specifications

Manufacturer	Bently Nevada (Baker Hughes)
Part Number	84661-30
Cable Type	Standard Armored Interconnect Cable
Conductor Size	0.382 mm2 (22 AWG)
Armor Material	Stainless Steel
Operating Temperature	-29 Celsius to 121 Celsius
Connector (HTVS End)	Moisture-resistant female connector
Connector (Monitor End)	Ring lugs
Minimum Bend Radius	51 mm (2.0 in)

Installation Guidelines

Ensure the cable is routed away from high-voltage power lines to prevent electromagnetic interference. The stainless steel armor provides protection against physical damage; however, maintain the minimum bend radius of 51 mm (2.0 in) during installation to avoid damaging the internal conductors. Secure the cable using appropriate clamps to prevent vibration-induced stress on the connector interfaces. Ensure the mating part of the connector provides IP54 ingress protection or better as required.