Description

The General Electric IC670MDL233 is an 8-point isolated discrete input module designed for the GE Field Control distributed I/O architecture. This module provides reliable monitoring of 120VAC industrial input devices, converting alternating current field signals into digital data suitable for system processing. Operating within a 0 to 132VAC input range at 47 to 63 Hz, it incorporates internal resistor-capacitor networks and optoisolators to deliver robust noise filtering and complete electrical isolation between field circuits and system logic.

Power for internal module operation is supplied directly via the backplane from a compatible Bus Interface Unit (BIU), drawing a maximum of 40 mA. External input devices require a separate 120VAC power source. Real-time status indication is provided by individual front-panel LEDs for each input point alongside a dedicated power (PWR) LED that confirms backplane power availability. The module communicates its 8 bits of discrete input data to the host or local processor through the system BIU.

Features

• Provides 8 isolated 120VAC discrete inputs for GE Field Control systems
• Wide input voltage range from 0 to 132VAC (47 to 63 Hz)
• Built-in optoisolation offering 250VAC continuous and 1500VAC one-minute dielectric strength between user inputs and logic or frame ground
• Individual point status LEDs and a dedicated backplane power (PWR) indicator
• Low internal power consumption, drawing a maximum of 40 mA from the Bus Interface Unit
• Configurable intelligent processing features including input defaults and fault reporting handled via the BIU

Applications

• Discrete industrial automation and manufacturing lines
• AC sensor and limit switch monitoring
• Process control and packaging machinery
• Distributed I/O architectures requiring isolated 120VAC signal acquisition

Technical Specifications

Connections / Interfaces

• Bus Interface Unit (BIU) Interface: Connects to the backplane to receive operating power and transmit 8 bits of serialized input data.
• Terminal Block Options: Compatible with Field Control base styles including Box Terminals (IC670CHS002/102), Barrier Terminals (IC670CHS001/101), and Wire-to-Board Connectors (IC670CHS003/103).
• Auxiliary Terminal Blocks: Optional auxiliary terminal blocks can be utilized for expanded power distribution and field wiring termination.

Installation Guidelines

• Ensure all system power and external 120VAC field supplies are turned off before installing or removing the module from the base.
• Verify that the correct optional keying pins are set on the base and module to prevent incorrect insertion.
• Securely attach the module to the designated Field Control base unit, ensuring proper mating with backplane connectors.
• Connect field input wiring to the appropriate terminal block connections, respecting the recommended wire gauge sizes (AWG 14 to 22 depending on terminal type).