Honeywell FC-CPCHAS-0003 Safety Manager Control Processor Chassis

Description

The Honeywell FC-CPCHAS-0003 is a dedicated control processor chassis engineered specifically for deployment within Honeywell Safety Manager industrial safety instrumented systems. Serving as the primary physical and electrical housing for system control processors, this robust hardware platform facilitates both redundant and non-redundant controller architectures in mission-critical process safety applications.

Installed typically at the uppermost position within standard control cabinets with I/O chassis mounted below, the FC-CPCHAS-0003 features an open-front mechanical design equipped with precision top and bottom module guides. Control processor modules slide smoothly into position and lock securely via integrated quarter-turn fasteners beneath the module grips, ensuring reliable physical retention and stable electrical backplane interfacing in high-vibration industrial environments.

Features

• Engineered specifically for Honeywell Safety Manager control processor architectures
• Supports both redundant and non-redundant controller configurations
• Robust 19-inch mechanical housing optimized for standard industrial cabinet mounting
• Front-loading design with integrated module guides for secure insertion and alignment
• Quarter-turn locking fasteners for rapid, tool-assisted module retention
• Provides reliable internal power distribution and signal backplane routing

Applications

• Emergency Shutdown Systems (ESD)
• Burner Management Systems (BMS)
• High Integrity Pressure Protection Systems (HIPPS)
• Turbine and Compressor Safety Control
• Process Industries (Oil, Gas, Petrochemical, and Chemical Refining)

Technical Specifications

Installation Guidelines

1. Verify the part number and inspect the FC-CPCHAS-0003 chassis for any physical damage sustained during transit.
2. Ensure all associated cabinet power supplies are fully de-energized and locked out before beginning mechanical installation.
3. Mount the chassis securely into the designated top position of the industrial control cabinet using appropriate hardware.
4. Connect incoming 24 VDC power wiring and system grounding to the designated terminal points according to system schematics.
5. Insert compatible Safety Manager control processor modules into the front guides, pushing firmly until seated.
6. Secure the modules using the quarter-turn fasteners located beneath the module grips, then apply power and verify system diagnostics.