The BECKHOFF EPP3184-0002 is a high-performance EtherCAT P Box designed for the direct acquisition of analog process signals in industrial environments. Utilizing advanced EtherCAT P technology, this unit integrates both high-speed communication and electrical power supply (system and sensor supply Us, peripheral voltage for actuators Up) into a single, standard cable. This unified architecture simplifies system wiring, minimizes installation footprint, and lowers overall commissioning costs.
Equipped with four single-ended analog inputs, the BECKHOFF EPP3184-0002 offers exceptional flexibility by allowing each channel to be individually parameterized. Field sensors transmitting standard voltage ranges (-10/0 to +10 V) or current signals (0/4 to 20 mA) can be connected directly without requiring hardware-variant changes. With its 16-bit resolution, fast conversion time, and configurable input filters, this EtherCAT P Box delivers precise, synchronized measurement data directly from the machine field level.
| Parameter | Specification |
|---|---|
| Manufacturer | BECKHOFF |
| Model Number | EPP3184-0002 |
| Product Type | EtherCAT P Box (Analog Input) |
| Number of Inputs | 4 single-ended |
| Signal Type (Parameterizable) | -10 to +10 V, 0 to +10 V, 0 to 20 mA, 4 to 20 mA |
| Resolution | 16 bit (including sign) |
| Measurement Error / Uncertainty | Less than +/-0.3% (relative to full-scale value) |
| Conversion Time | Approximately 100 microseconds |
| Input Filter Limit Frequency | 5 kHz |
| Input Filter Settings | Configurable |
| Internal Resistance (Voltage Input) | Greater than 200 kOhm |
| Internal Resistance (Current Input) | Typically 85 Ohm + diode voltage |
| Common-Mode Voltage (Ucm) | Maximum 35 V |
| Nominal Voltage | 24 V DC (-15% / +20%) |
| Sensor Supply | Derived from load supply voltage (Up) |
| Current Consumption (from Us) | Typically 100 mA |
| Electrical Isolation | 500 V |
| Distributed Clocks (DC) | Yes |
| Bus Interface Connection | 2 x M8 socket, shielded, screw type, P-coded |
| Input Connection Technology | M12 x 1, 5-pin, A-coded |
| Operating Temperature | -25 to +60 degC |
| Storage Temperature | -40 to +85 degC |
| Protection Rating | IP65, IP66, IP67 (conforms to EN 60529) |
| Vibration / Shock Resistance | Conforms to EN 60068-2-6 / EN 60068-2-27 |
| EMC Immunity / Emission | Conforms to EN 61000-6-2 / EN 61000-6-4 |
| Approvals and Markings | CE, UL |
| Weight | Approximately 165 g |
The BECKHOFF EPP3184-0002 must be configured in the TwinCAT engineering software. Scan the EtherCAT P network or manually import the corresponding EtherCAT Software Information (ESI) file. For each individual channel, navigate to the parameterization settings to set the desired input signal type (voltage or current) and configure input filter characteristics as demanded by the application requirements.
Global Express Shipping
Returns & Warranty
Manufacturer: BECKHOFF
Product No.: EPP3184-0002
Country of origin:Germany
Product Type: EtherCAT P Boxes
Payment: T/T, Western Union
Weight: 165g
Shipping port: Xiamen
Warranty: 12 months
The BECKHOFF EPP3184-0002 is a high-performance EtherCAT P Box designed for the direct acquisition of analog process signals in industrial environments. Utilizing advanced EtherCAT P technology, this unit integrates both high-speed communication and electrical power supply (system and sensor supply Us, peripheral voltage for actuators Up) into a single, standard cable. This unified architecture simplifies system wiring, minimizes installation footprint, and lowers overall commissioning costs.
Equipped with four single-ended analog inputs, the BECKHOFF EPP3184-0002 offers exceptional flexibility by allowing each channel to be individually parameterized. Field sensors transmitting standard voltage ranges (-10/0 to +10 V) or current signals (0/4 to 20 mA) can be connected directly without requiring hardware-variant changes. With its 16-bit resolution, fast conversion time, and configurable input filters, this EtherCAT P Box delivers precise, synchronized measurement data directly from the machine field level.
| Parameter | Specification |
|---|---|
| Manufacturer | BECKHOFF |
| Model Number | EPP3184-0002 |
| Product Type | EtherCAT P Box (Analog Input) |
| Number of Inputs | 4 single-ended |
| Signal Type (Parameterizable) | -10 to +10 V, 0 to +10 V, 0 to 20 mA, 4 to 20 mA |
| Resolution | 16 bit (including sign) |
| Measurement Error / Uncertainty | Less than +/-0.3% (relative to full-scale value) |
| Conversion Time | Approximately 100 microseconds |
| Input Filter Limit Frequency | 5 kHz |
| Input Filter Settings | Configurable |
| Internal Resistance (Voltage Input) | Greater than 200 kOhm |
| Internal Resistance (Current Input) | Typically 85 Ohm + diode voltage |
| Common-Mode Voltage (Ucm) | Maximum 35 V |
| Nominal Voltage | 24 V DC (-15% / +20%) |
| Sensor Supply | Derived from load supply voltage (Up) |
| Current Consumption (from Us) | Typically 100 mA |
| Electrical Isolation | 500 V |
| Distributed Clocks (DC) | Yes |
| Bus Interface Connection | 2 x M8 socket, shielded, screw type, P-coded |
| Input Connection Technology | M12 x 1, 5-pin, A-coded |
| Operating Temperature | -25 to +60 degC |
| Storage Temperature | -40 to +85 degC |
| Protection Rating | IP65, IP66, IP67 (conforms to EN 60529) |
| Vibration / Shock Resistance | Conforms to EN 60068-2-6 / EN 60068-2-27 |
| EMC Immunity / Emission | Conforms to EN 61000-6-2 / EN 61000-6-4 |
| Approvals and Markings | CE, UL |
| Weight | Approximately 165 g |
The BECKHOFF EPP3184-0002 must be configured in the TwinCAT engineering software. Scan the EtherCAT P network or manually import the corresponding EtherCAT Software Information (ESI) file. For each individual channel, navigate to the parameterization settings to set the desired input signal type (voltage or current) and configure input filter characteristics as demanded by the application requirements.
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
Germany
|
Replacing a 1756-L73 does not automatically mean upgrading its firmware. This guide compares v19.013, v21.011 and v31.011, focusing on project compatibility, HMI communications, legacy networks and...
Implement a 3-SPST switch XOR light circuit in LogixPro or RSLogix 500 using an internal relay bit. Includes truth tables, boolean equations, and verified.
Integrate Allen-Bradley CompactLogix, Caterpillar ATS, and generators into DeltaV DCS over Modbus RTU. Covers ProSoft MVI69-MCM, Miille DIN266 gateways.
ONS instruction fires but the OTE coil never latches in Studio 5000 because the one-shot is only true for one scan. Use OTL/OTU or seal-in logic instead.
Configure Allen-Bradley Kinetix 5500 servo drives on EtherNet/IP. Covers CIP Sync, IEEE 1588 V2 timing, Stratix selection, DLR topology, and HMI.
A moving-average filter is the sliding-window smoother most instrument engineers drop into DCS and PLC analog paths. Here is how the window works, how N and sample time set lag, and when a...
