Description

The Siemens 6AV7240-3BC16-0KA2 is a SIMATIC IPC 477D series panel PC designed for demanding industrial automation applications. This unit features a 15-inch touch display, an Intel Core i3-3217UE processor, and 4 GB of RAM for reliable performance in HMI and control tasks. It is equipped with a 320 GB SATA HDD and comes pre-installed with Windows 7 Ultimate (32-bit). Connectivity is provided through multiple Gigabit Ethernet ports, USB interfaces, and a serial port, all powered by an integrated 110/230V AC industrial power supply.

Features

• ■15-inch resistive touch screen display
• ■Intel Core i3-3217UE processor
• ■4 GB of installed system memory
• ■320 GB SATA Hard Disk Drive (HDD)
• ■Pre-installed with Windows 7 Ultimate (32-bit)
• ■Integrated 110/230V AC industrial power supply with NAMUR compliance
• ■Extensive connectivity with 3x Gigabit Ethernet, 5x USB, and 1x RS232 ports
• ■One PCIe expansion slot for additional hardware

Applications

• ■Human Machine Interface (HMI) for process visualization
• ■Supervisory Control and Data Acquisition (SCADA) nodes
• ■Machine-level data logging and analysis
• ■PC-based automation and control systems
• ■Manufacturing Execution Systems (MES) terminals

Technical Specifications

Installation Guidelines

1. 1
   De-energize Equipment: Isolate and lock out all power sources to the control cabinet or mounting location according to LOTO procedures. Verify the absence of voltage before proceeding.
2. 2
   Prepare Panel Cutout: Ensure the panel cutout dimensions match the IPC 477D installation requirements. The surface must be clean, flat, and free of debris to ensure a proper seal.
3. 3
   Mount the Unit: Insert the Panel PC into the cutout from the front. Secure it from the rear using the provided mounting clamps, tightening them evenly to the specified torque to maintain the IP rating.
4. 4
   Connect Protective Earth (PE): Connect the chassis PE terminal to the cabinet's main protective earth bus using a low-impedance conductor of the appropriate gauge. This is a critical safety connection.
5. 5
   Connect Power Supply: Connect the 110/230V AC power source to the unit's power input terminals. Ensure the provided Europe power cable is correctly and securely seated.
6. 6
   Connect Peripherals and Network: Connect all required Ethernet, USB, and serial cables. Use shielded cables for communication lines and ensure proper grounding of shields to minimize EMI/RFI interference.
7. 7
   Final Checks and Power-Up: After verifying all connections are secure, remove the lockout/tagout and re-energize the main power supply. Power on the Panel PC and confirm that the operating system boots correctly.