Description

The Siemens 6ES7647-6CB00-0BA0 is a SIMATIC IPC627C series Box PC designed for robust industrial applications. This unit is configured with an Intel Celeron P4505 processor, 1 GB of DDR3 RAM, and a 250 GB SATA hard drive. It provides extensive connectivity through dual Gigabit Ethernet ports, a PROFIBUS/MPI interface, and multiple USB 2.0 ports. The system includes an integrated 110/230V AC industrial power supply and comes pre-installed with the Windows XP Professional SP3 operating system, making it a comprehensive platform for control, visualization, and data acquisition tasks.

Features

• Processor: Intel Celeron P4505 (2 Cores, 2 Threads, 1.86 GHz)
• Memory: 1 GB DDR3 1066 DIMM and 2 MB buffered SRAM
• Storage: 250 GB SATA Hard Disk Drive (HDD) and a DVD+/-RW optical drive
• Connectivity: Dual 10/100/1000 Mbit/s Ethernet ports
• Fieldbus Interface: Integrated PROFIBUS/MPI (CP 5611-A2 compatible)
• Expansion: Two free PCI slots for additional hardware
• Power Supply: 110/230V AC industrial power supply with NAMUR compliance
• System Monitoring: Integrated watchdog timer, temperature, and fan monitoring
• Operating System: Pre-installed Windows XP Professional SP3 (MUI)

Applications

• Machine-level data processing and control
• Process visualization and HMI server tasks
• Industrial data acquisition and logging
• Gateway applications between IT and OT networks
• Automation cells requiring legacy OS support

Technical Specifications

Installation Guidelines

1. 1 Site Preparation: Select a mounting location within an industrial enclosure that provides adequate ventilation and protection from moisture, corrosive agents, and excessive vibration. Ensure ambient temperature remains within the device's operating range.
2. 2 Mounting: Securely fasten the Box PC chassis to the mounting panel using all provided mounting points. Verify the unit is level and stable.
3. 3 Grounding: Connect the chassis grounding terminal to the main panel's protective earth (PE) busbar using a low-impedance conductor. A proper ground connection is critical for safety and noise immunity.
4. 4 I/O Connections: Connect all required peripheral and network cables, including Ethernet, PROFIBUS, USB, and serial devices. Use shielded cables for communication lines and ensure shields are properly terminated to ground at one end.
5. 5 Power Connection: Connect the provided AC power cable to the unit's power supply inlet and to a stable, correctly rated AC power source. Ensure the source voltage matches the 110/230V AC rating.
6. 6 System Startup: After verifying all connections, remove LOTO and apply power to the unit. Observe the boot sequence to ensure the operating system loads correctly and check for any hardware fault indicators.