The Bently Nevada 330101-00-28-10-02-05 is a high-precision proximity probe engineered for non-contact shaft vibration and displacement measurements in rotating machinery. Part of the industry-proven 3300 XL 8 mm Proximity Transducer System, this eddy-current sensor delivers high reliability and linearity to companion 3300 XL Proximitor sensors. This specific configuration is distinguished by its completely threaded 2.8-inch case (0.0-inch unthreaded length), 1.0-meter total cable length, and standard miniature coaxial ClickLoc connector with unarmored standard cable. Certified with CSA, ATEX, and IECEx agency approvals, this probe is optimized for critical machinery protection programs in hazardous atmospheres, such as steam and gas turbines, high-pressure compressors, and turbine-generator sets.
| Option / Segment | Code on This SKU | Meaning / Description |
|---|---|---|
| Orderable Part Number | 330101-00-28-10-02-05 | 3300 XL 8 mm Proximity Probe, 3/8-24 UNF thread, without armor |
| A - Unthreaded Length Option | 00 | 0.0 in unthreaded length |
| B - Overall Case Length Option | 28 | 2.8 in (71 mm) overall case length |
| C - Total Length Option | 10 | 1.0 meter (3.3 feet) total cable length |
| D - Connector and Cable-Type Option | 02 | Miniature coaxial ClickLoc connector, standard cable |
| E - Agency Approval Option | 05 | CSA, ATEX, and IECEx approvals for hazardous areas |
| Parameter | Specification Value |
|---|---|
| Manufacturer | Bently Nevada |
| Part Number / Model | 330101-00-28-10-02-05 |
| Product Family | 3300 XL 8 mm Proximity Transducer System |
| Probe Diameter | 8 mm |
| Measurement Type | Displacement (proximity) |
| Operating Principle | Eddy current |
| Thread Size | 3/8-24 UNF-2A |
| Armor Option | Without armor |
| Unthreaded Length | 0.0 in (0 mm) |
| Case Length | 2.8 in (71 mm) |
| Total Cable Length | 1.0 meter (3.3 feet) |
| Connector Type | Miniature coaxial ClickLoc connector |
| Cable Type | Standard 75 ohm triaxial fluoroethylene propylene (FEP) insulated cable |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 303 or 304 stainless steel (SST) |
| Operating Temperature Range | -52 degC to +177 degC (-62 degF to +350 degF) |
| Pressure Sealing | Viton O-ring (designed to seal differential pressure between tip and case) |
| Temperature Limit for Seal | Temperatures below -34 degC may cause premature seal failure |
| Maximum Rated Case Torque | 33.9 N-m (300 in-lbf) |
| Recommended Case Torque | 11.2 N-m (100 in-lbf) |
| Maximum Tensile Strength | 330 N (75 lbf) probe case to probe lead |
| Minimum Cable Bend Radius | 25.4 mm (1.0 in) |
| Dimensions | 45 mm x 95 mm x 95 mm (H x W x D) |
| Weight | 0.14 kg |
Global Express Shipping
Returns & Warranty
Manufacturer: Bently Nevada
Product No.: 330101-00-28-10-02-05
Country of origin:United States
Product Type: 3300 XL 8 mm Proximity Probe
Barcode: 8537101190
Payment: T/T, Western Union
Weight: 140g
Dimensions: 45 mm x 95 mm x 95 mm (H x W x D)
Shipping port: Xiamen
Warranty: 12 months
The Bently Nevada 330101-00-28-10-02-05 is a high-precision proximity probe engineered for non-contact shaft vibration and displacement measurements in rotating machinery. Part of the industry-proven 3300 XL 8 mm Proximity Transducer System, this eddy-current sensor delivers high reliability and linearity to companion 3300 XL Proximitor sensors. This specific configuration is distinguished by its completely threaded 2.8-inch case (0.0-inch unthreaded length), 1.0-meter total cable length, and standard miniature coaxial ClickLoc connector with unarmored standard cable. Certified with CSA, ATEX, and IECEx agency approvals, this probe is optimized for critical machinery protection programs in hazardous atmospheres, such as steam and gas turbines, high-pressure compressors, and turbine-generator sets.
| Option / Segment | Code on This SKU | Meaning / Description |
|---|---|---|
| Orderable Part Number | 330101-00-28-10-02-05 | 3300 XL 8 mm Proximity Probe, 3/8-24 UNF thread, without armor |
| A - Unthreaded Length Option | 00 | 0.0 in unthreaded length |
| B - Overall Case Length Option | 28 | 2.8 in (71 mm) overall case length |
| C - Total Length Option | 10 | 1.0 meter (3.3 feet) total cable length |
| D - Connector and Cable-Type Option | 02 | Miniature coaxial ClickLoc connector, standard cable |
| E - Agency Approval Option | 05 | CSA, ATEX, and IECEx approvals for hazardous areas |
| Parameter | Specification Value |
|---|---|
| Manufacturer | Bently Nevada |
| Part Number / Model | 330101-00-28-10-02-05 |
| Product Family | 3300 XL 8 mm Proximity Transducer System |
| Probe Diameter | 8 mm |
| Measurement Type | Displacement (proximity) |
| Operating Principle | Eddy current |
| Thread Size | 3/8-24 UNF-2A |
| Armor Option | Without armor |
| Unthreaded Length | 0.0 in (0 mm) |
| Case Length | 2.8 in (71 mm) |
| Total Cable Length | 1.0 meter (3.3 feet) |
| Connector Type | Miniature coaxial ClickLoc connector |
| Cable Type | Standard 75 ohm triaxial fluoroethylene propylene (FEP) insulated cable |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 303 or 304 stainless steel (SST) |
| Operating Temperature Range | -52 degC to +177 degC (-62 degF to +350 degF) |
| Pressure Sealing | Viton O-ring (designed to seal differential pressure between tip and case) |
| Temperature Limit for Seal | Temperatures below -34 degC may cause premature seal failure |
| Maximum Rated Case Torque | 33.9 N-m (300 in-lbf) |
| Recommended Case Torque | 11.2 N-m (100 in-lbf) |
| Maximum Tensile Strength | 330 N (75 lbf) probe case to probe lead |
| Minimum Cable Bend Radius | 25.4 mm (1.0 in) |
| Dimensions | 45 mm x 95 mm x 95 mm (H x W x D) |
| Weight | 0.14 kg |
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
Implement a 3-SPST switch XOR light circuit in LogixPro or RSLogix 500 using an internal relay bit. Includes truth tables, boolean equations, and verified.
Integrate Allen-Bradley CompactLogix, Caterpillar ATS, and generators into DeltaV DCS over Modbus RTU. Covers ProSoft MVI69-MCM, Miille DIN266 gateways.
ONS instruction fires but the OTE coil never latches in Studio 5000 because the one-shot is only true for one scan. Use OTL/OTU or seal-in logic instead.
Configure Allen-Bradley Kinetix 5500 servo drives on EtherNet/IP. Covers CIP Sync, IEEE 1588 V2 timing, Stratix selection, DLR topology, and HMI.
A moving-average filter is the sliding-window smoother most instrument engineers drop into DCS and PLC analog paths. Here is how the window works, how N and sample time set lag, and when a...
On Frame 5–9 gas turbines, GE Mark VI and Mark VIe run control as function-block application software. This article maps process, protection, and sequencing functions—and what Toolbox ST access...
