Bently Nevada 330103-00-04-10-01-00 3300 XL 8 mm Proximity Probe

Description

330103-00-04-10-01-00 specifies a 3300 XL 8 mm proximity probe with an M10 x 1 metric thread, featuring a 0 mm unthreaded length, a 40 mm overall case length, a 1.0 m total cable length, and a miniature coaxial ClickLoc connector with an integrated connector protector.

This configuration is unarmored and is suited for metric thread mount installations where physical space fits a 40 mm case length and no unthreaded section is required. It pairs with a 3300 XL extension cable and a 3300 XL Proximitor sensor to form a complete 3300 XL 8 mm proximity transducer system. The integrated 1.0 m standard coaxial cable terminates in a ClickLoc gold-plated connector surrounded by an integral connector protector, which shields the connection from dust, moisture, and mechanical wear in industrial environments.

Features

• M10 x 1 metric thread options specify the case mounting interface for metric machinery ports.
• Option 00 unthreaded length provides a fully threaded 40 mm case length for shallow or standard mounting depths.
• Option 10 specifies a 1.0 m standard coaxial cable, reducing total system cable requirements when paired with an 8.0 m extension cable.
• Option 01 supplies a gold-plated miniature coaxial ClickLoc connector with an integrated connector protector.
• Polyphenylene sulfide (PPS) probe tip material withstands corrosive industrial lubricants and operating temperatures.
• AISI 303 stainless steel thread housing is without armor, reducing weight and outer diameter profile.

Applications

• Used for shaft vibration and axial position measurement on rotating machinery.
• Pairs with 3300 XL monitoring chains in steam turbines, gas turbines, compressors, and pumps.
• Suitable for thrust position, radial vibration, and Keyphasor speed reference sensing.

Ordering Information

Technical Specifications

Installation Guidelines

• Avoid over-torquing the probe during installation; the maximum thread engagement length for M10 x 1 threads is 15 mm.
• Maintain a minimum clearance of 3 probe diameters (approx. 24 mm) from adjacent metal to prevent side-viewing interference.
• Align the probe tip to achieve the required nominal gap voltage (typically -10 Vdc to -11 Vdc for mid-range positioning).
• Ensure the ClickLoc connectors are kept clean, dry, and free of oil before joining; finger-tighten only.

Compliance and Certifications

• CE compliant
• RoHS compliant
• This specific configuration (Option 00) does not include hazardous area approvals.