Manufacturer: Bently Nevada
Product No.: 330103-00-13-05-02-00
Country of origin:United States
Product Type: 3300 XL 8 mm Proximity Probe
Barcode: 8537101190
Payment: T/T, Western Union
Weight: 160g
Dimensions: 150 mm x 150 mm x 30 mm (H x W x D)
Shipping port: Xiamen
Warranty: 12 months
330103-00-13-05-02-00 specifies a metric thread 3300 XL 8 mm proximity probe configuration without physical armor, presenting a fully threaded M10 x 1 case designed for machinery housings with pre-drilled threaded entry ports. This specific configuration features a 0 mm unthreaded length (Option 00) and an extended 130 mm overall case length (Option 13) to navigate deep-seated shafts or structural clearances. Terminating in a short 0.5-meter total integrated cable length (Option 05) with a standard miniature coaxial ClickLoc connector (Option 02), this probe requires an external extension cable to interface with a Proximitor sensor.
This variant differs from its counterpart configurations by omitting protective steel armor, making it ideal for clean conduits or enclosed machine cases. The M10 x 1 thread establishes compliance with metric design standards, avoiding the need for English-to-metric thread adapters. The miniature coaxial connection enables swift, click-lock coupling without specialized terminal wiring tools. Since this unit is specified with Option 00 for agency approvals, it is designed for non-hazardous locations or standard industrial applications where explosive-atmosphere certifications are not required.
This metric unarmored proximity probe is used for non-contact shaft displacement and position measurements in rotating machinery. Typical applications include shaft radial vibration, axial position (thrust), and tachometer/speed measurements on steam turbines, gas turbines, compressors, gearboxes, pumps, and large electric motors where the internal space contains an enclosed, clean lubricating oil environment.
| Option Code Group | This SKU Selection | Selection Description |
|---|---|---|
| Orderable Part Number | 330103-00-13-05-02-00 | 3300 XL 8 mm proximity probe, M10 x 1 thread, without armor |
| A - Unthreaded Length Option | 00 | 0 mm unthreaded length |
| B - Overall Case Length Option | 13 | 130 mm overall case length (ordered in increments of 10 mm) |
| C - Total Length Option | 05 | 0.5 meter (1.6 feet) total integrated cable length |
| D - Connector and Cable-Type Option | 02 | Miniature coaxial ClickLoc connector, standard cable |
| E - Agency Approval Option | 00 | No hazardous area agency approvals required |
| Parameter | Specification Value |
|---|---|
| Manufacturer | Bently Nevada (Baker Hughes) |
| Part Number / Model | 330103-00-13-05-02-00 |
| Probe Tip Diameter | 8.0 mm (0.31 in) |
| Thread Size | M10 x 1 (Metric) |
| Case Material | AISI 303 or 304 stainless steel (SST) |
| Tip Material | Polyphenylene sulfide (PPS) |
| Integrated Cable Type | 75 ohm coaxial, FEP insulated, unarmored |
| Linear Range | 2.0 mm (80 mils), from approximately 0.25 mm to 2.25 mm (10 to 90 mils) |
| Incremental Scale Factor (ISF) | 7.87 V/mm (200 mV/mil) +/-5% typical |
| Nominal Calibration Target | AISI 4140 steel |
| Nominal DC Resistance | 7.45 ohms +/-0.50 ohms (center to outer conductor) |
| Operating Temperature Range | -52 degC to +177 degC (-62 degF to +350 degF) |
| Pressure Rating | Tip-to-case pressure sealed up to 7.0 bar (100 psi) |
| Minimum Cable Bend Radius | 25.4 mm (1.0 in) |
| Dimensions | 150 mm x 150 mm x 30 mm (H x W x D) |
| Weight | 0.16 kg (160 g) |
| Interface Point | Description |
|---|---|
| ClickLoc Connector | Miniature male coaxial connector designed to lock into the female ClickLoc connector of a 3300 XL extension cable. |
When installing this fully threaded M10 x 1 probe case, the maximum allowable thread engagement length is 15 mm. Tighten the probe body within the threaded port using the standard 10 mm hexagonal wrench flats provided on the body. A standard mechanical gap of 1.27 mm (50 mils) must be set using a physical shim or by monitoring the Proximitor sensor output until a voltage of -9.0 Vdc is achieved at the target's nominal operating position. Ensure a minimum cable bend radius of 25.4 mm is maintained to prevent insulation or core wire damage.
This specific unapproved configuration (Option 00) is intended only for non-hazardous, standard safe-area industrial machinery applications. It lacks ATEX, IECEx, or CSA explosion-proof markings.
Global Express Shipping
Returns & Warranty
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
Compare the IC693CPU360 and IC693CPU364 by Ethernet interface, +5 VDC load, memory, rack limits, and replacement checks.
A field-first diagnostic sequence for 1756-OF4 analog output problems: channel mode, removable terminal block, scaling, and controlled electrical checks.
A direct comparison of 1746-OA8 and 1746-OA16 output count, common grouping, backplane current and temperature-derated load limits.
A field checklist for recording the 1761-NET-DNI hardware series, firmware, EDS file, DF1 settings, DeviceNet address and messaging configuration before replacement.
The EL3062 is a 0–10 V EtherCAT terminal. The EL3062-0030 is a 0–30 V variant. This checklist covers identification, scaling and commissioning.
A field checklist for replacing Allen-Bradley 1769-OW8 relay output modules without losing load-group, wiring, and commissioning details.
