330103-00-13-10-02-00 specifies a 3300 XL 8 mm proximity probe with an M10 x 1 metric thread, configured with a 0 mm unthreaded length, a 130 mm overall case length, a 1.0 meter total length, a standard coaxial cable with a miniature ClickLoc connector, and no hazardous area approvals. This eddy-current sensor is used for rotating machinery protection, providing physical position or dynamic vibration measurements.
This specific configuration differs from the armored variations and standard unthreaded options by featuring a fully threaded metric body with no protective stainless steel armor over the 1.0-meter FEP coaxial cable. The probe connects directly to a standard 3300 XL extension cable and is designed to operate without agency approval requirements, making it ideal for standard general-purpose machinery monitoring environments where hazardous area ratings are unnecessary.
| Option | Code on This SKU | Description |
|---|---|---|
| Orderable Part Number | 330103-00-13-10-02-00 | 3300 XL 8 mm Proximity Probe, M10 x 1 thread, without armor |
| A - Unthreaded Length Option | 00 | 0 mm |
| B - Overall Case Length Option | 13 | 130 mm case length |
| C - Total Length Option | 10 | 1.0 meter (3.3 feet) total length |
| D - Connector and Cable Option | 02 | Miniature coaxial ClickLoc connector, standard cable |
| E - Agency Approval Option | 00 | No agency approvals required (general purpose) |
| Manufacturer | Bently Nevada |
| Part Number | 330103-00-13-10-02-00 |
| Thread Pitch / Size | M10 x 1 metric thread |
| Unthreaded Length | 0 mm |
| Case Length | 130 mm |
| Total Length | 1.0 meter (3.3 feet) |
| Cable Construction | 75 ohm triaxial, FEP-insulated coaxial cable (unarmored) |
| Connector Type | Miniature male coaxial ClickLoc connector |
| Probe Tip Diameter | 8.0 mm (0.31 in) |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 303 stainless steel (SST) |
| Linear Range | 2.0 mm (80 mils) nominal |
| Target Material Compatibility | AISI 4140 steel target |
| System Scale Factor | 7.87 V/mm (200 mV/mil) nominal |
| Operating Temperature (Probe) | -52 degC to +177 degC (-62 degF to +350 degF) |
| Maximum Case Torque | 33.9 N-m (300 in-lbf) |
| Recommended Torque | 11.2 N-m (100 in-lbf) |
| Minimum Bend Radius | 25.4 mm (1.0 in) |
| Probe Tensile Strength | 330 N (75 lbf) maximum case to lead pull |
| Dimensions | 130 mm x 10 mm x 10 mm (H x W x D) |
| Weight | 0.15 kg |
When installing this proximity probe, maintain adequate lateral clearance (at least 40 mm) from surrounding metallic structures to avoid signal interference. Adjust the physical gap between the probe tip and the target shaft to a nominal distance of 1.27 mm (50 mils) to achieve a standard output of roughly -10 Vdc from the associated Proximitor. Do not exceed the maximum mounting torque of 33.9 N-m (300 in-lbf) when securing the metric case. Run the FEP coaxial cable ensuring the bend radius does not drop below 25.4 mm (1.0 in) to prevent damaging internal triaxial layers. General-purpose installations should shield cable junctions from fluid or chemical exposures.
Global Express Shipping
Returns & Warranty
Manufacturer: Bently Nevada
Product No.: 330103-00-13-10-02-00
Country of origin:United States
Product Type: 3300 XL 8 mm Proximity Probe
Barcode: 8537101190
Payment: T/T, Western Union
Weight: 150g
Dimensions: 130 mm x 10 mm x 10 mm (H x W x D)
Shipping port: Xiamen
Warranty: 12 months
330103-00-13-10-02-00 specifies a 3300 XL 8 mm proximity probe with an M10 x 1 metric thread, configured with a 0 mm unthreaded length, a 130 mm overall case length, a 1.0 meter total length, a standard coaxial cable with a miniature ClickLoc connector, and no hazardous area approvals. This eddy-current sensor is used for rotating machinery protection, providing physical position or dynamic vibration measurements.
This specific configuration differs from the armored variations and standard unthreaded options by featuring a fully threaded metric body with no protective stainless steel armor over the 1.0-meter FEP coaxial cable. The probe connects directly to a standard 3300 XL extension cable and is designed to operate without agency approval requirements, making it ideal for standard general-purpose machinery monitoring environments where hazardous area ratings are unnecessary.
| Option | Code on This SKU | Description |
|---|---|---|
| Orderable Part Number | 330103-00-13-10-02-00 | 3300 XL 8 mm Proximity Probe, M10 x 1 thread, without armor |
| A - Unthreaded Length Option | 00 | 0 mm |
| B - Overall Case Length Option | 13 | 130 mm case length |
| C - Total Length Option | 10 | 1.0 meter (3.3 feet) total length |
| D - Connector and Cable Option | 02 | Miniature coaxial ClickLoc connector, standard cable |
| E - Agency Approval Option | 00 | No agency approvals required (general purpose) |
| Manufacturer | Bently Nevada |
| Part Number | 330103-00-13-10-02-00 |
| Thread Pitch / Size | M10 x 1 metric thread |
| Unthreaded Length | 0 mm |
| Case Length | 130 mm |
| Total Length | 1.0 meter (3.3 feet) |
| Cable Construction | 75 ohm triaxial, FEP-insulated coaxial cable (unarmored) |
| Connector Type | Miniature male coaxial ClickLoc connector |
| Probe Tip Diameter | 8.0 mm (0.31 in) |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 303 stainless steel (SST) |
| Linear Range | 2.0 mm (80 mils) nominal |
| Target Material Compatibility | AISI 4140 steel target |
| System Scale Factor | 7.87 V/mm (200 mV/mil) nominal |
| Operating Temperature (Probe) | -52 degC to +177 degC (-62 degF to +350 degF) |
| Maximum Case Torque | 33.9 N-m (300 in-lbf) |
| Recommended Torque | 11.2 N-m (100 in-lbf) |
| Minimum Bend Radius | 25.4 mm (1.0 in) |
| Probe Tensile Strength | 330 N (75 lbf) maximum case to lead pull |
| Dimensions | 130 mm x 10 mm x 10 mm (H x W x D) |
| Weight | 0.15 kg |
When installing this proximity probe, maintain adequate lateral clearance (at least 40 mm) from surrounding metallic structures to avoid signal interference. Adjust the physical gap between the probe tip and the target shaft to a nominal distance of 1.27 mm (50 mils) to achieve a standard output of roughly -10 Vdc from the associated Proximitor. Do not exceed the maximum mounting torque of 33.9 N-m (300 in-lbf) when securing the metric case. Run the FEP coaxial cable ensuring the bend radius does not drop below 25.4 mm (1.0 in) to prevent damaging internal triaxial layers. General-purpose installations should shield cable junctions from fluid or chemical exposures.
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
Implement a 3-SPST switch XOR light circuit in LogixPro or RSLogix 500 using an internal relay bit. Includes truth tables, boolean equations, and verified.
Integrate Allen-Bradley CompactLogix, Caterpillar ATS, and generators into DeltaV DCS over Modbus RTU. Covers ProSoft MVI69-MCM, Miille DIN266 gateways.
ONS instruction fires but the OTE coil never latches in Studio 5000 because the one-shot is only true for one scan. Use OTL/OTU or seal-in logic instead.
Configure Allen-Bradley Kinetix 5500 servo drives on EtherNet/IP. Covers CIP Sync, IEEE 1588 V2 timing, Stratix selection, DLR topology, and HMI.
A moving-average filter is the sliding-window smoother most instrument engineers drop into DCS and PLC analog paths. Here is how the window works, how N and sample time set lag, and when a...
On Frame 5–9 gas turbines, GE Mark VI and Mark VIe run control as function-block application software. This article maps process, protection, and sequencing functions—and what Toolbox ST access...
