Configured with a 4.5-meter length (Option 045) and pre-installed connector protectors (Option 02), the Bently Nevada 330130-045-02-05 3300 XL Standard Extension Cable provides connection integrity for 3300 XL proximity transducer loops. This standard extension cable acts as the transmission bridge between a 3300 XL 8 mm proximity probe and a 3300 XL Proximitor sensor. By implementing the Option 02 configuration, the assembly utilizes a standard 3.68 mm coaxial cable with factory-installed connector protectors on both ends to shield against fluid, dirt, and moisture ingress in demanding industrial environments.
The standard 3300 XL extension cable incorporates gold-plated ClickLoc coaxial connectors that click together firmly, requiring only finger-tight torque to establish a secure locking mechanism that resists rotational loosening under continuous machinery vibration. Option 05 designated on this specific model ensures compliance with major international hazardous area certifications, including CSA, ATEX, and IECEx approvals. It is fully compatible with standard 3300 XL 8 mm proximity transducer setups and can also be used interchangeably with legacy non-XL 3300 series 5 mm and 8 mm system components.
This extension cable is used in turbo-machinery protection systems and machinery diagnostic setups for industries such as power generation, oil and gas, petrochemical, and water treatment. It is suitable for connecting probes to transmitters in the following systems:
| Option Segment | Code Value | Configuration Meaning |
|---|---|---|
| Orderable Part Number | 330130-045-02-05 | 3300 XL Standard Extension Cable, 4.5 meters length, with connector protectors, CSA/ATEX/IECEx approved |
| A - Cable Length | 045 | 4.5 meters (14.8 feet) length |
| B - Connector Protector & Cable | 02 | Standard cable with pre-installed connector protector |
| C - Agency Approval | 05 | CSA, ATEX, and IECEx approvals |
| Manufacturer | Bently Nevada (Baker Hughes) |
| Part Number | 330130-045-02-05 |
| Product Series | 3300 XL Transducer System |
| Product Type | Standard Extension Cable |
| Cable Length | 4.5 meters (14.8 feet) |
| Cable Impedance | 75 ohms nominal |
| Cable Outside Diameter | 3.68 mm maximum |
| Connector Type | Gold-plated ClickLoc coaxial connectors |
| Connector Material | Gold-plated brass or gold-plated beryllium copper |
| Connector Pull Strength | 330 N (75 lbf) maximum |
| Operating Temperature | -51 degC to +177 degC for standard applications |
| Minimum Bend Radius | 25.4 mm (1.0 in) |
| Dimensions (H x W x D) | 25 mm x 200 mm x 200 mm (coiled package configuration) |
| Weight | 0.18 kg |
| Cable End | Connector Style | Connection Interface Type |
|---|---|---|
| Probe Connection End | Miniature coaxial female ClickLoc | Connects to 3300 XL 8 mm proximity probe lead male connector |
| Sensor Connection End | Miniature coaxial male ClickLoc | Connects to 3300 XL Proximitor sensor input female connector |
| Hazardous Area Approvals | Option 05: ATEX, IECEx, CSA (for Class I Division 1, Zone 0, Zone 1 applications) |
| RoHS | Compliant |
Global Express Shipping
Returns & Warranty
Manufacturer: Bently Nevada
Product No.: 330130-045-02-05
Country of origin:United States
Product Type: 3300 XL Standard Extension Cable
Barcode: 8537101190
Payment: T/T, Western Union
Weight: 180g
Dimensions: 25 mm x 200 mm x 200 mm (H x W x D)
Shipping port: Xiamen
Warranty: 12 months
Configured with a 4.5-meter length (Option 045) and pre-installed connector protectors (Option 02), the Bently Nevada 330130-045-02-05 3300 XL Standard Extension Cable provides connection integrity for 3300 XL proximity transducer loops. This standard extension cable acts as the transmission bridge between a 3300 XL 8 mm proximity probe and a 3300 XL Proximitor sensor. By implementing the Option 02 configuration, the assembly utilizes a standard 3.68 mm coaxial cable with factory-installed connector protectors on both ends to shield against fluid, dirt, and moisture ingress in demanding industrial environments.
The standard 3300 XL extension cable incorporates gold-plated ClickLoc coaxial connectors that click together firmly, requiring only finger-tight torque to establish a secure locking mechanism that resists rotational loosening under continuous machinery vibration. Option 05 designated on this specific model ensures compliance with major international hazardous area certifications, including CSA, ATEX, and IECEx approvals. It is fully compatible with standard 3300 XL 8 mm proximity transducer setups and can also be used interchangeably with legacy non-XL 3300 series 5 mm and 8 mm system components.
This extension cable is used in turbo-machinery protection systems and machinery diagnostic setups for industries such as power generation, oil and gas, petrochemical, and water treatment. It is suitable for connecting probes to transmitters in the following systems:
| Option Segment | Code Value | Configuration Meaning |
|---|---|---|
| Orderable Part Number | 330130-045-02-05 | 3300 XL Standard Extension Cable, 4.5 meters length, with connector protectors, CSA/ATEX/IECEx approved |
| A - Cable Length | 045 | 4.5 meters (14.8 feet) length |
| B - Connector Protector & Cable | 02 | Standard cable with pre-installed connector protector |
| C - Agency Approval | 05 | CSA, ATEX, and IECEx approvals |
| Manufacturer | Bently Nevada (Baker Hughes) |
| Part Number | 330130-045-02-05 |
| Product Series | 3300 XL Transducer System |
| Product Type | Standard Extension Cable |
| Cable Length | 4.5 meters (14.8 feet) |
| Cable Impedance | 75 ohms nominal |
| Cable Outside Diameter | 3.68 mm maximum |
| Connector Type | Gold-plated ClickLoc coaxial connectors |
| Connector Material | Gold-plated brass or gold-plated beryllium copper |
| Connector Pull Strength | 330 N (75 lbf) maximum |
| Operating Temperature | -51 degC to +177 degC for standard applications |
| Minimum Bend Radius | 25.4 mm (1.0 in) |
| Dimensions (H x W x D) | 25 mm x 200 mm x 200 mm (coiled package configuration) |
| Weight | 0.18 kg |
| Cable End | Connector Style | Connection Interface Type |
|---|---|---|
| Probe Connection End | Miniature coaxial female ClickLoc | Connects to 3300 XL 8 mm proximity probe lead male connector |
| Sensor Connection End | Miniature coaxial male ClickLoc | Connects to 3300 XL Proximitor sensor input female connector |
| Hazardous Area Approvals | Option 05: ATEX, IECEx, CSA (for Class I Division 1, Zone 0, Zone 1 applications) |
| RoHS | Compliant |
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
Implement a 3-SPST switch XOR light circuit in LogixPro or RSLogix 500 using an internal relay bit. Includes truth tables, boolean equations, and verified.
Integrate Allen-Bradley CompactLogix, Caterpillar ATS, and generators into DeltaV DCS over Modbus RTU. Covers ProSoft MVI69-MCM, Miille DIN266 gateways.
ONS instruction fires but the OTE coil never latches in Studio 5000 because the one-shot is only true for one scan. Use OTL/OTU or seal-in logic instead.
Configure Allen-Bradley Kinetix 5500 servo drives on EtherNet/IP. Covers CIP Sync, IEEE 1588 V2 timing, Stratix selection, DLR topology, and HMI.
A moving-average filter is the sliding-window smoother most instrument engineers drop into DCS and PLC analog paths. Here is how the window works, how N and sample time set lag, and when a...
On Frame 5–9 gas turbines, GE Mark VI and Mark VIe run control as function-block application software. This article maps process, protection, and sequencing functions—and what Toolbox ST access...
