330180-X1-05MOD:145347-05 specifies this customized 3300 XL Proximitor Sensor configuration, featuring the X1 DIN-rail mount modification, standard Agency Approval Option 05, and a specialized target material calibration under Modification 145347 (Option 05).
This customized Proximitor sensor is calibrated as part of a specialized modification chain to ensure precise shaft vibration and axial position tracking when paired with 3300 XL 5 mm or 8 mm proximity probes and 9-meter extension cables. By departing from standard AISI 4140 steel calibration, this sensor corrects for the specific electrical conductivity and magnetic permeability of alternative rotor metallurgy, delivering a linear voltage output in critical turbomachinery applications.
The sensor is ideal for turbomachinery monitoring in heavy-industry sectors such as oil and gas, petrochemicals, power generation, and water treatment. It is specifically applied where machinery shafts are composed of non-standard alloys rather than AISI 4140 steel, including:
| Segment Code | This SKU Value | Configuration Meaning |
|---|---|---|
| Orderable Part Number | 330180-X1-05MOD:145347-05 | 3300 XL 5mm/8mm 9m Recalibrated Proximitor Sensor |
| Segment A: Total Length and Mounting | X1 | Modification, DIN Mount |
| Segment B: Agency Approval and Mod Code | 05MOD:145347 | Multiple Approvals (including CSA, ATEX, IECEx) with custom recalibration modification family 145347 |
| Segment C: Target Material Option | 05 | Option 05 target material calibration under Modification 145347 |
| Parameter | Specification Value |
|---|---|
| Manufacturer | Bently Nevada |
| Model Number | 330180-X1-05MOD:145347-05 |
| Device Type | Proximitor Sensor |
| System Compatibility | 3300 XL 5 mm / 8 mm (9-Meter) |
| Mounting Configuration | DIN-rail mount (X1 option) |
| Agency Approvals | Option 05 (Multiple Approvals: CSA, ATEX, IECEx) |
| Linear Range | 10 to 90 mils (0.25 to 2.25 mm) |
| Output Scale Factor | 7.87 V/mm (200 mV/mil) |
| Electrical Zero (E-zero) | -3.0 Vdc @ 20 mils |
| Operating Temperature Range | -51 to 100 degC |
| Dimensions | 81.3 mm x 61.2 mm x 104.1 mm (H x W x D) |
| Weight | 0.25 kg |
Ensure the Proximitor sensor is mounted in a dry, clean enclosure or weather-proof housing to prevent moisture ingress. Maintain proper DIN rail grounding to protect signal integrity. Secure probe and extension cable coaxial connections with connector protectors or self-coalescing tape to insulate them from structural ground paths. Shielded field wiring must run back to the monitoring system to eliminate electromagnetic coupling.
When ordered with Option 05, this device is certified for installation in hazardous locations under multiple international schemes:
Global Express Shipping
Returns & Warranty
Manufacturer: Bently Nevada
Product No.: 330180-X1-05 MOD：145347-05
Country of origin:United States
Product Type: 3300 XL 5mm/8mm Proximitor Sensor
Barcode: 8537101190
Payment: T/T, Western Union
Weight: 250g
Dimensions: 81.3 mm x 61.2 mm x 104.1 mm (H x W x D)
Shipping port: Xiamen
Warranty: 12 months
330180-X1-05MOD:145347-05 specifies this customized 3300 XL Proximitor Sensor configuration, featuring the X1 DIN-rail mount modification, standard Agency Approval Option 05, and a specialized target material calibration under Modification 145347 (Option 05).
This customized Proximitor sensor is calibrated as part of a specialized modification chain to ensure precise shaft vibration and axial position tracking when paired with 3300 XL 5 mm or 8 mm proximity probes and 9-meter extension cables. By departing from standard AISI 4140 steel calibration, this sensor corrects for the specific electrical conductivity and magnetic permeability of alternative rotor metallurgy, delivering a linear voltage output in critical turbomachinery applications.
The sensor is ideal for turbomachinery monitoring in heavy-industry sectors such as oil and gas, petrochemicals, power generation, and water treatment. It is specifically applied where machinery shafts are composed of non-standard alloys rather than AISI 4140 steel, including:
| Segment Code | This SKU Value | Configuration Meaning |
|---|---|---|
| Orderable Part Number | 330180-X1-05MOD:145347-05 | 3300 XL 5mm/8mm 9m Recalibrated Proximitor Sensor |
| Segment A: Total Length and Mounting | X1 | Modification, DIN Mount |
| Segment B: Agency Approval and Mod Code | 05MOD:145347 | Multiple Approvals (including CSA, ATEX, IECEx) with custom recalibration modification family 145347 |
| Segment C: Target Material Option | 05 | Option 05 target material calibration under Modification 145347 |
| Parameter | Specification Value |
|---|---|
| Manufacturer | Bently Nevada |
| Model Number | 330180-X1-05MOD:145347-05 |
| Device Type | Proximitor Sensor |
| System Compatibility | 3300 XL 5 mm / 8 mm (9-Meter) |
| Mounting Configuration | DIN-rail mount (X1 option) |
| Agency Approvals | Option 05 (Multiple Approvals: CSA, ATEX, IECEx) |
| Linear Range | 10 to 90 mils (0.25 to 2.25 mm) |
| Output Scale Factor | 7.87 V/mm (200 mV/mil) |
| Electrical Zero (E-zero) | -3.0 Vdc @ 20 mils |
| Operating Temperature Range | -51 to 100 degC |
| Dimensions | 81.3 mm x 61.2 mm x 104.1 mm (H x W x D) |
| Weight | 0.25 kg |
Ensure the Proximitor sensor is mounted in a dry, clean enclosure or weather-proof housing to prevent moisture ingress. Maintain proper DIN rail grounding to protect signal integrity. Secure probe and extension cable coaxial connections with connector protectors or self-coalescing tape to insulate them from structural ground paths. Shielded field wiring must run back to the monitoring system to eliminate electromagnetic coupling.
When ordered with Option 05, this device is certified for installation in hazardous locations under multiple international schemes:
| Product Image | Model Number / Title | Condition | Availability | Action |
|---|---|---|---|---|
|
Bently Nevada 330180-X0-00 MOD 161255-02 3300 XL 5/8 mm Proximitor Sensor | Original New | In Stock | View Details |
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
Implement a 3-SPST switch XOR light circuit in LogixPro or RSLogix 500 using an internal relay bit. Includes truth tables, boolean equations, and verified.
Integrate Allen-Bradley CompactLogix, Caterpillar ATS, and generators into DeltaV DCS over Modbus RTU. Covers ProSoft MVI69-MCM, Miille DIN266 gateways.
ONS instruction fires but the OTE coil never latches in Studio 5000 because the one-shot is only true for one scan. Use OTL/OTU or seal-in logic instead.
Configure Allen-Bradley Kinetix 5500 servo drives on EtherNet/IP. Covers CIP Sync, IEEE 1588 V2 timing, Stratix selection, DLR topology, and HMI.
A moving-average filter is the sliding-window smoother most instrument engineers drop into DCS and PLC analog paths. Here is how the window works, how N and sample time set lag, and when a...
On Frame 5–9 gas turbines, GE Mark VI and Mark VIe run control as function-block application software. This article maps process, protection, and sequencing functions—and what Toolbox ST access...
