Manufacturer: Bently Nevada
Product No.: 330851-02-000-066-10-00-00
Country of origin:United States
Product Type: 3300 XL 25 mm Proximity Probe
Barcode: 8537101190
Payment: T/T, Western Union
Weight: 350g
Dimensions: 70 mm x 120 mm x 120 mm (H x W x D)
Shipping port: Xiamen
Warranty: 12 months
330851-02-000-066-10-00-00 is a 3300 XL 25 mm proximity probe configured with an M30x2 metric threaded case (Option 02), 0.0 mm unthreaded length (Option 000), 66 mm overall case length (Option 066), 1.0 m total length (Option 10), unarmored cable (Option 00), and standard approvals (Option 00).
This eddy-current displacement probe is used for non-contact, large-target measurements like steam turbine differential expansion or rotor axial thrust position. Combining a front-and-rear sealing design with standard perfluoroalkoxyethylene (PFA) insulated FluidLoc cable, it prevents moisture ingress into the probe tip. High-temperature ClickLoc connectors are standard and feature a removable collar on the probe lead female connector to simplify installation inside tight conduit clearances.
| Option Code | This SKU Value | Meaning |
|---|---|---|
| Orderable Part Number | 330851-02-000-066-10-00-00 | 3300 XL 25 mm Proximity Probe |
| A - Probe Case Type Option | 02 | M30x2 thread |
| B - Unthreaded Length Option | 000 | 0.0 mm (fully threaded case) |
| C - Overall Case Length Option | 066 | 66 mm case length |
| D - Total Length Option | 10 | 1.0 metre (3.3 feet) |
| E - Armor Option | 00 | No Armor |
| F - Agency Approval Option | 00 | No Approvals |
| Manufacturer | Bently Nevada (Baker Hughes) |
| Part Number / Model | 330851-02-000-066-10-00-00 |
| Linear Range | 12.7 mm (500 mils), from approximately 0.63 to 13.33 mm (25 to 525 mils) |
| Average Scale Factor (ASF) | 0.787 V/mm (20 mV/mil) nominal |
| Deviation from Best Fit Straight Line (DSL) | Less than +/-0.31 mm (+/-12 mils) |
| Operating and Storage Temperature | -35 degC to +200 degC (-31 degF to +392 degF) |
| Probe Tip Material | Polyetheretherketone (PEEK) |
| Probe Case Material | AISI 304 stainless steel (SST) |
| Probe Cable Material | 75 ohm triaxial, perfluoroalkoxyethylene (PFA) insulated FluidLoc probe cable |
| Tensile Strength (maximum rated) | 330 N (75 pounds) probe case to probe lead; 270 N (60 pounds) at connectors |
| Maximum Rated Case Torque | 163 N-m (120 ft-lb) |
| Connector Material | Gold-plated brass and gold-plated beryllium copper |
| Recommended Minimum Target Size | 61 mm (2.4 in) diameter flat target |
| Interface Element | Description |
|---|---|
| Probe Connector Type | High-temperature coaxial ClickLoc female connector |
| Removable Collar | Removable brass routing nut with 5.3 mm maximum diameter when removed |
Global Express Shipping
Returns & Warranty
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
Compare the IC693CPU360 and IC693CPU364 by Ethernet interface, +5 VDC load, memory, rack limits, and replacement checks.
A field-first diagnostic sequence for 1756-OF4 analog output problems: channel mode, removable terminal block, scaling, and controlled electrical checks.
A direct comparison of 1746-OA8 and 1746-OA16 output count, common grouping, backplane current and temperature-derated load limits.
A field checklist for recording the 1761-NET-DNI hardware series, firmware, EDS file, DF1 settings, DeviceNet address and messaging configuration before replacement.
The EL3062 is a 0–10 V EtherCAT terminal. The EL3062-0030 is a 0–30 V variant. This checklist covers identification, scaling and commissioning.
A field checklist for replacing Allen-Bradley 1769-OW8 relay output modules without losing load-group, wiring, and commissioning details.
