Bently Nevada 330910-00-11-10-02-05 3300 NSv Proximity Probes

SKU 330910-00-11-10-02-05

In stock

12-month warranty
Free returns within 30 days

Manufacturer: Bently Nevada
Product No.: 330910-00-11-10-02-05
Country of origin:United States
Product Type: 3300 NSv Proximity Probes
Barcode: 8537101190
Payment: T/T, Western Union
Weight: 120g
Dimensions: 45 mm x 90 mm x 90 mm (H x W x D)
Shipping port: Xiamen
Warranty: 12 months

Description

330910-00-11-10-02-05: 3300 NSv proximity probe, M10x1 metric thread, Option 00 unthreaded length of 0 mm, Option 11 overall case length of 110 mm, Option 10 total length of 1.0 m, Option 02 miniature coaxial ClickLoc connector on standard cable, and Option 05 Multiple Approvals.

This configuration incorporates a rugged, flexible stainless steel armor sleeve over the 1.0 meter coaxial cable, protecting the assembly against mechanical wear, cutting, and abrasion. Operating on eddy-current measurement principles, this proximity probe provides non-contact shaft vibration and axial position measurements in applications with tight clearances. It is used on fluid-filmed bearing machines and high-density installations such as centrifugal air compressors or process gas machinery where space, counterbore, or target size constraints limit the use of larger standard transducers.

Features

Metric Armor Interface: Features an M10x1 metric threaded body integrated with a flexible AISI 302 stainless steel armor sleeve over the probe cable.
Fully Threaded Case: Option 00 provides a 0 mm unthreaded section, ensuring full thread engagement for secure mounting.
Extended Case Reach: Option 11 specifies a 110 mm case length, facilitating deep-set installation in heavy machine casings.
Standard ClickLoc Connection: Option 02 provides a gold-plated miniature coaxial ClickLoc connector on standard FEP-insulated cable.
Explosive Area Approval: Option 05 supplies hazardous area approvals from major agencies, enabling installation in intrinsically safe environments.

Applications

Radial vibration and axial position monitoring on centrifugal air and refrigeration compressors.
Process gas compressor shaft displacement measurements.
Vibration monitoring on machinery with limited target geometry or tight counterbore areas.
Non-contact measurements on small-diameter shafts down to 20 mm.
High-speed industrial rotating machinery protection systems.

Ordering Information

Option / Segment	Code on This SKU	Description
Orderable Part Number	330910-00-11-10-02-05	3300 NSv Proximity Probe, M10x1 metric thread, with stainless steel armor
A - Unthreaded Length Option	00	0 mm (fully threaded case)
B - Overall Case Length Option	11	110 mm overall case length
C - Total Length Option	10	1.0 meter (39 in) total cable length
D - Connector and Cable Option	02	Miniature coaxial ClickLoc connector, standard cable (no connector protector)
E - Agency Approval Option	05	Multiple Approvals (including CSA, ATEX, and IECEx)

Technical Specifications

Manufacturer	Bently Nevada (Baker Hughes)
Model Number	330910-00-11-10-02-05	3300 NSv Proximity Probe
Thread Specification	M10x1 metric thread
Case Configuration	With AISI 302 stainless steel armor
Unthreaded Length	0 mm
Overall Case Length	110 mm
Total System Length	1.0 meter (39 inches)
Probe Tip Diameter	5.26 mm (0.207 in) maximum
Probe Tip Material	Polyphenylene sulfide (PPS)
Probe Case Material	AISI 304 stainless steel (SST)
Cable Type	75 ohm coaxial, fluoroethylene propylene (FEP) insulated
Connector Type	Gold-plated brass miniature male coaxial ClickLoc connector
Linear Range	1.5 mm (60 mils), from approximately 0.25 to 1.75 mm (10 to 70 mils)
Recommended Gap Setting	1.0 mm (40 mils)
Average Scale Factor (ASF)	7.87 V/mm (200 mV/mil)
Deviation from Best Fit Straight Line (DSL)	Less than +/-0.06 mm (+/-2.3 mils)
Tensile Strength	220 N (50 lb) maximum rated from probe case to lead, lead to connector, and case to armor
Minimum Cable Bend Radius	25.4 mm (1.0 in)
Operating and Storage Temperature Range	-52 degC to +177 degC (-62 degF to +351 degF)
Pressure Seal Integrity	Designed to seal differential pressure via internal Viton O-ring (avoid sustained operation below -34 degC)
Relative Humidity	100% condensing, non-submersible when connectors are protected

Installation Guidelines

Gapping: Set the probe gap to 1.0 mm (40 mils) using the Proximitor Sensor DC output voltage to ensure the sensor operates in the middle of its linear range.
Tightening Torque: Secure the M10x1 threaded body into the machine housing with a recommended torque of 11.3 N m (100 in-lb) and do not exceed the maximum rated limit of 33.9 N m (300 in-lb).
Routing and Bend Radius: Maintain a minimum bend radius of 25.4 mm (1.0 in) along the armored cable routing path to prevent signal degradation or structural damage.
Connector Care: Ensure ClickLoc connectors remain clean and dry. Keep them free of grease, moisture, and chemical solvents during installation.

Compliance and Certifications

Hazardous Area Ratings: Intrinsically Safe (Ex ia IIC T5...T1 Ga) and Non-Sparking/Non-Incendive (Ex nA/ec IIC T5...T1 Gc) when connected to certified barriers per Bently Nevada drawings 141092 or 140979.
Electromagnetic Compatibility: CE Mark compliant with European Directives 2014/30/EU (EN 61000-6-2 and EN 61000-6-4).
Environmental Safety: RoHS Directive 2011/65/EU and China RoHS EFUP 15-year designation.
Functional Safety: Certified up to SIL 2 (HFT=0) and SIL 3 (HFT=1) when configured in safety instrumented systems.

FAQ

What thread type and housing style are specified by the 330910-00-11-10-02-05 probe?

This probe features a metric M10x1 thread with integrated stainless steel armor for physical protection.

What do the -00 unthreaded and -11 case length options represent on this configuration?

Option 00 specifies a 0 mm unthreaded length (fully threaded case), and Option 11 specifies a 110 mm overall case length.

What cable length and connector type are provided with this part number?

The probe includes a 1.0 meter (39 inch) standard coaxial cable terminated with a miniature coaxial ClickLoc connector without a connector protector.

Does this probe carry hazardous area certifications?

Yes, Option 05 indicates Multiple Approvals, which include CSA, ATEX, and IECEx certifications for hazardous area installations.

View all FAQs →

Product Documentation

Technical Datasheet (PDF) Complete specifications and technical drawings.

1 / 3

Quantity

Call sales Contact

Shipping & Returns

Global Express Shipping

Standard Delivery: 4–6 business days via DHL, FedEx, and UPS.
Express Dispatch: Same-day dispatch for in-stock orders placed before 2:00 PM (GMT+8).
Worldwide Coverage: Serving over 150 countries.

Returns & Warranty

30-Day Guarantee: Returns accepted for in-stock products in original, factory-sealed packaging.
12-Month Warranty: Every industrial component is backed by our technical warranty.

Reviews

1 3

Only 5 item(s) left in stock

Quantity

View full details

Global Express Shipping

Standard Delivery: 4-6 Business Days via DHL, FedEx, and UPS.
Express Dispatch: Same-day dispatch for in-stock orders placed before 2:00 PM (GMT+8).
Worldwide Coverage: Serving over 150 countries, including rapid delivery to Saudi Arabia and UAE.

Returns & Warranty

30-Day Guarantee: Returns accepted for in-stock products in original, factory-sealed packaging.
12-Month Warranty: Every industrial component is backed by our professional technical warranty.

Orders are processed and delivered Monday-Friday (excluding public holidays).

For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .

TECHNICAL SPECIFICATIONS

Country of origin