Manufacturer: Bently Nevada
Product No.: 330930-045-03-05
Country of origin:United States
Product Type: 3300 NSv Extension Cable
Barcode: 8537101190
Payment: T/T, Western Union
Weight: 120g
Dimensions: 45 mm x 90 mm x 90 mm (H x W x D)
Shipping port: Xiamen
Warranty: 12 months
330930-045-03-05: 3300 NSv extension cable with a length of 4.5 meters, configured without stainless steel armor and with a connector protector for multiple agency approvals. This standard coaxial cable is used in the 3300 XL NSv proximity transducer system for machinery vibration and position monitoring, bridging the probe to the Proximitor sensor.
This specific variant is configured without stainless steel armor (Option 03) but includes a pre-installed fluorosilicone connector protector. This ensures the 75 ohm ClickLoc coaxial connectors remain protected from fluids and contaminants, stabilizing the high-frequency signal transmission in tight-clearance industrial environments. This cable is fully rated under multiple international hazardous area certifications (Option 05) and is compatible with Bently Nevada 330980 Proximitor sensors.
| Option | Code on This SKU | Description |
|---|---|---|
| Orderable Part Number | 330930-045-03-05 | 3300 NSv Extension Cable |
| A - Cable Length Option | 045 | 4.5 meters (14.8 feet) |
| B - Connector and Cable Option | 03 | Without stainless steel armor, with connector protector |
| C - Agency Approval Option | 05 | Multiple Approvals |
| Manufacturer | Bently Nevada |
| Model / Part Number | 330930-045-03-05 |
| System Compatibility | 3300 XL NSv Proximity Transducer System |
| Cable Type | 75 ohm FEP-insulated coaxial cable (2.80 mm maximum outside diameter) |
| Cable Resistance | Center conductor: 0.220 ohm/m (0.067 ohm/ft), Shield: 0.066 ohm/m (0.020 ohm/ft) |
| Cable Capacitance | 69.9 pF/m (21.3 pF/ft) typical |
| Connector Type | Gold-plated brass coaxial ClickLoc connectors (male and female) |
| Connector Protector | Fluorosilicone material (pre-installed on female end) |
| Operating and Storage Temperature | -52 degC to +177 degC (-62 degF to +351 degF) |
| Relative Humidity | 100% condensing, non-submersible when connectors are protected (Tested to IEC 68-2-3 damp heat) |
Ensure that the sum of the extension cable length and the probe length equals the Proximitor sensor's calibrated system length (typically 5.0 meters). When joining the ClickLoc connectors, push and twist to secure the locking mechanism. Utilize the pre-installed connector protector or self-fusing silicone tape to prevent liquids from entering the coaxial connection, especially in applications exposed to lubricants or moisture. Avoid routing the unarmored cable over sharp metal edges without protective conduit.
Global Express Shipping
Returns & Warranty
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
Compare the IC693CPU360 and IC693CPU364 by Ethernet interface, +5 VDC load, memory, rack limits, and replacement checks.
A field-first diagnostic sequence for 1756-OF4 analog output problems: channel mode, removable terminal block, scaling, and controlled electrical checks.
A direct comparison of 1746-OA8 and 1746-OA16 output count, common grouping, backplane current and temperature-derated load limits.
A field checklist for recording the 1761-NET-DNI hardware series, firmware, EDS file, DF1 settings, DeviceNet address and messaging configuration before replacement.
The EL3062 is a 0–10 V EtherCAT terminal. The EL3062-0030 is a 0–30 V variant. This checklist covers identification, scaling and commissioning.
A field checklist for replacing Allen-Bradley 1769-OW8 relay output modules without losing load-group, wiring, and commissioning details.
