BECKHOFF KL9540-0010 Module filtre de surtension Bornier système

Product Overview

The KL9540-0010 (KL9540010) is a specialized system terminal designed to provide surge protection for the field supply of analog terminals within the Beckhoff Bus Terminal system. In high-precision industrial environments—such as chemical processing plants, water treatment facilities, and power distribution grids—analog signals are highly susceptible to electrical interference and voltage spikes. This module acts as a critical line of defense, filtering the 24 VDC field supply to ensure stable, noise-free power reaches sensitive downstream components. By isolating the field supply from transient surges, the KL9540-0010 significantly enhances signal integrity and protects expensive analog I/O infrastructure from catastrophic hardware failure and data corruption.

Technical Configuration

The KL9540-0010 serves as a protective bridge within the K-Bus terminal block assembly. It features an integrated surge filter specifically optimized for the field supply, supporting a rated current of up to 5 A. The hardware is housed in a compact 12 mm polycarbonate chassis, utilizing a double slot and key connection for seamless side-by-side mounting on a standard 35 mm DIN rail. For wiring, the unit employs high-reliability spring-cage actuation, compatible with solid, stranded, and ferruled conductors ranging from AWG 28 to AWG 14. This configuration allows for rapid, tool-actuated maintenance while ensuring vibration-proof electrical contacts in high-movement industrial machinery.

Technical Specifications

Technical FAQs

Does the KL9540-0010 filter the K-Bus logic power or the field supply?

This module specifically filters the field supply (24 VDC) used by analog terminals. It is designed to suppress surges originating from the field side to prevent them from affecting the accuracy of analog-to-digital conversions or damaging downstream modules.

Is there a specific mounting orientation required for this terminal?

No, the installation position is variable. However, it must be securely snapped onto a 35 mm DIN rail conforming to EN 60715 and properly locked using the integrated double slot and key connection to maintain mechanical stability.

What type of wiring is recommended for the surge filter connections?

The terminal supports solid (e), flexible (f), and stranded (st) conductors. For optimal performance in high-vibration environments, using ferrules (f) with a connection cross-section of 0.14 to 1.5 mm squared is recommended to ensure a gas-tight, reliable connection.

Engineering & Installation Guide

• Placement Strategy: For maximum efficacy, install the KL9540-0010 immediately upstream of the analog terminal group it is intended to protect. This ensures that any electrical noise or surges picked up by the field supply lines are filtered out before reaching the sensitive analog processing stages.

• Wiring Discipline: Maintain a stripping length of 8 to 9 mm for all conductors. When using a screwdriver for spring actuation, ensure the tool is properly sized to avoid damaging the polycarbonate housing or the internal spring mechanism. Ensure that the power contact current does not exceed the 10 A maximum load rating during peak system operation.

• Grounding and EMC Compliance: To satisfy EN 61000-6-2 immunity standards, ensure the DIN rail is properly bonded to the functional earth (FE) of the control cabinet. The KL9540-0010 relies on a low-impedance path to ground to effectively dissipate surge energy.