FX5-ENET/IP | Mitsubishi Electric | Module réseau

Description

Engineered to expand the connectivity of the MELSEC iQ-F controller platform, the Mitsubishi Electric FX5-ENET/IP network module provides dedicated EtherNet/IP and standard Ethernet communication capabilities. Integrating this module into your automation architecture enables the FX5 CPU to act as both an EtherNet/IP scanner (master) and adapter (slave) simultaneously, facilitating seamless data exchange with remote I/O, variable frequency drives, and third-party instruments. Operating on a 24 V DC internal power supply with a low current draw of 110 mA, it delivers high-performance industrial networking without putting unnecessary strain on the system's power budget.

Features

• Dual-role capability functioning as both an EtherNet/IP CIP communication scanner and adapter.
• Supports standard Ethernet communication protocols alongside industrial EtherNet/IP on a single physical link.
• Seamless integration with GX Works3 configuration software for drag-and-drop network mapping.
• Compact form factor designed for direct right-side extension bus connection to FX5U or FX5UC CPU modules.
• Diagnostic LED array for real-time link status, module health, and network collision monitoring.

Applications

• Multi-Vendor Integration: Connecting MELSEC iQ-F controllers to third-party EtherNet/IP compliant devices such as sensors and vision systems.
• Distributed Field I/O: Managing remote I/O drops across large manufacturing footprints with minimal latency.
• Drive Control: Real-time speed and torque command routing to compatible variable speed drives over industrial Ethernet.
• SCADA and HMI Bridging: Serving high-throughput data to supervisor level control rooms and operator interfaces.

Technical Specifications

Status LED Configurations

Empirical Engineering Insights

Alternative Models & Compatibility

Unlike the built-in Ethernet port on FX5U CPU modules, which primarily processes CC-Link IE Field Basic, Modbus/TCP, and MELSOFT connection protocols, the FX5-ENET/IP is explicitly optimized for heavy-duty CIP (Common Industrial Protocol) traffic. If your network topology mandates cyclic, high-speed Class 1 implicit messaging with third-party components, this module must be appended. Note that firmware version 1.040 or higher in the host FX5 CPU is required for full feature exploitation.

Application Pitfalls & Engineering Notes

During high-traffic cyclic communication periods, network jitter can trigger NS fault codes. It is highly recommended to isolate EtherNet/IP messaging traffic from plant-wide IT office networks using managed switches with IGMP snooping configured. When mounting multiple extension modules, position the FX5-ENET/IP as close to the CPU as possible to ensure structural bus signaling integrity.

Commissioning & Wiring Tips

Always use Category 5e (or better) Double-Shielded Twisted Pair (S/FTP) cabling in high electromagnetic noise environments. Avoid routing the network cable parallel to high-voltage lines or variable frequency drive output cables to prevent induced noise from corrupting data packets.

Installation Guidelines