The Bently Nevada 330101-00-48-10-02-05 is a high-performance, non-armored 8 mm proximity probe designed as a core component of the industry-standard 3300 XL series. Operating on eddy-current measurement principles, this non-contacting sensor provides highly precise dynamic measurements of static shaft position and dynamic vibration against rotating machinery shaft targets (typically AISI 4140 steel). It plays an essential role in machinery protection and condition monitoring chains, interfacing seamlessly with 3300 XL series Proximitor sensors and extension cables.
This specific configuration is built with a 4.8-inch fully threaded case (indicated by the 0.0-inch unthreaded option and 4.8-inch case length code) using standard 3/8-24 UNF threads, allowing for direct mounting into bearing housings or machine casings where maximum threaded adjustability is required. It is equipped with a 1.0-meter standard triaxial FEP-insulated cable terminated in a gold-plated miniature coaxial ClickLoc connector (without connector protector) and is fully certified under CSA, ATEX, and IECEx approvals for safe installation in hazardous industrial zones.
| Option Segment | Code on This SKU | Description / Meaning |
|---|---|---|
| Orderable Part Number | 330101-00-48-10-02-05 | 3300 XL 8 mm Proximity Probe, 3/8-24 UNF thread, without armor |
| A - Unthreaded Length Option | 00 | 0.0 inches (fully threaded probe body) |
| B - Overall Case Length Option | 48 | 4.8 inches overall case length |
| C - Total Length Option | 10 | 1.0 meter (3.3 feet) total cable length |
| D - Connector and Cable-Type Option | 02 | Miniature coaxial ClickLoc connector, standard cable (no connector protector) |
| E - Agency Approval Option | 05 | CSA, ATEX, IECEx Approvals for hazardous locations |
| Parameter | Specification Value |
|---|---|
| Manufacturer | Bently Nevada |
| Model / Part Number | 330101-00-48-10-02-05 |
| Product Family | 3300 XL 8 mm Proximity Transducer System |
| Measurement Type | Displacement (proximity) |
| Operating Principle | Eddy current |
| Probe Diameter | 8 mm |
| Case Thread Size | 3/8-24 UNF |
| Armor Option | None (unarmored standard cable) |
| Cable Construction | 75 ohm triaxial fluoroethylene propylene (FEP) insulated cable |
| Nominal Probe DC Resistance | 7.59 ohms +/- 0.50 ohms (center conductor to outer conductor) |
| Tensile Strength (Maximum) | 330 N (75 lbf) probe case to probe lead; 270 N (60 lbf) at probe-to-extension connector |
| Minimum Cable Bend Radius | 25.4 mm (1.0 inch) |
| Recommended Probe Case Torque | 11.2 N-m (100 in-lbf) standard forward-mount; 7.5 N-m (66 in-lbf) first three threads |
| Maximum Probe Case Torque | 33.9 N-m (300 in-lbf) standard forward-mount; 22.6 N-m (200 in-lbf) first three threads |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 303 or 304 stainless steel (SST) |
| Operating and Storage Temperature | -52 degC to +177 degC (-62 degF to +350 degF) |
| Environmental Notes | Exposing the probe to temperatures below -34 degC (-30 degF) may cause premature pressure seal failure |
| Relative Humidity Limits | Less than 3% change in Average Scale Factor (ASF) when tested in 93% humidity (IEC 68-2-3 for up to 56 days) |
| Dimensions | 45 mm x 95 mm x 95 mm (H x W x D) |
| Weight | 0.14 kg |
Ensure the proximity probe is installed in accordance with standard Bently Nevada engineering practices. Mount with an appropriate probe gap per system calibration (typically gapped at 1.27 mm or 50 mils against an AISI 4140 steel target for standard 3300 XL systems). Always route the coaxial cable with proper shielding and grounding practices to prevent electrical noise in the vibration monitoring paths. Ensure minimum cable bend radius limits of 25.4 mm (1.0 inch) are respected. Avoid overtightening the probe casing; apply torque up to the recommended 11.2 N-m (100 in-lbf) to prevent damaging thread engagements.
This configuration complies with the following approvals and directives:
Global Express Shipping
Returns & Warranty
Manufacturer: Bently Nevada
Product No.: 330101-00-48-10-02-05
Country of origin:United States
Product Type: 3300 XL 8 mm Proximity Probe
Barcode: 8537101190
Payment: T/T, Western Union
Weight: 140g
Dimensions: 45 mm x 95 mm x 95 mm (H x W x D)
Shipping port: Xiamen
Warranty: 12 months
The Bently Nevada 330101-00-48-10-02-05 is a high-performance, non-armored 8 mm proximity probe designed as a core component of the industry-standard 3300 XL series. Operating on eddy-current measurement principles, this non-contacting sensor provides highly precise dynamic measurements of static shaft position and dynamic vibration against rotating machinery shaft targets (typically AISI 4140 steel). It plays an essential role in machinery protection and condition monitoring chains, interfacing seamlessly with 3300 XL series Proximitor sensors and extension cables.
This specific configuration is built with a 4.8-inch fully threaded case (indicated by the 0.0-inch unthreaded option and 4.8-inch case length code) using standard 3/8-24 UNF threads, allowing for direct mounting into bearing housings or machine casings where maximum threaded adjustability is required. It is equipped with a 1.0-meter standard triaxial FEP-insulated cable terminated in a gold-plated miniature coaxial ClickLoc connector (without connector protector) and is fully certified under CSA, ATEX, and IECEx approvals for safe installation in hazardous industrial zones.
| Option Segment | Code on This SKU | Description / Meaning |
|---|---|---|
| Orderable Part Number | 330101-00-48-10-02-05 | 3300 XL 8 mm Proximity Probe, 3/8-24 UNF thread, without armor |
| A - Unthreaded Length Option | 00 | 0.0 inches (fully threaded probe body) |
| B - Overall Case Length Option | 48 | 4.8 inches overall case length |
| C - Total Length Option | 10 | 1.0 meter (3.3 feet) total cable length |
| D - Connector and Cable-Type Option | 02 | Miniature coaxial ClickLoc connector, standard cable (no connector protector) |
| E - Agency Approval Option | 05 | CSA, ATEX, IECEx Approvals for hazardous locations |
| Parameter | Specification Value |
|---|---|
| Manufacturer | Bently Nevada |
| Model / Part Number | 330101-00-48-10-02-05 |
| Product Family | 3300 XL 8 mm Proximity Transducer System |
| Measurement Type | Displacement (proximity) |
| Operating Principle | Eddy current |
| Probe Diameter | 8 mm |
| Case Thread Size | 3/8-24 UNF |
| Armor Option | None (unarmored standard cable) |
| Cable Construction | 75 ohm triaxial fluoroethylene propylene (FEP) insulated cable |
| Nominal Probe DC Resistance | 7.59 ohms +/- 0.50 ohms (center conductor to outer conductor) |
| Tensile Strength (Maximum) | 330 N (75 lbf) probe case to probe lead; 270 N (60 lbf) at probe-to-extension connector |
| Minimum Cable Bend Radius | 25.4 mm (1.0 inch) |
| Recommended Probe Case Torque | 11.2 N-m (100 in-lbf) standard forward-mount; 7.5 N-m (66 in-lbf) first three threads |
| Maximum Probe Case Torque | 33.9 N-m (300 in-lbf) standard forward-mount; 22.6 N-m (200 in-lbf) first three threads |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 303 or 304 stainless steel (SST) |
| Operating and Storage Temperature | -52 degC to +177 degC (-62 degF to +350 degF) |
| Environmental Notes | Exposing the probe to temperatures below -34 degC (-30 degF) may cause premature pressure seal failure |
| Relative Humidity Limits | Less than 3% change in Average Scale Factor (ASF) when tested in 93% humidity (IEC 68-2-3 for up to 56 days) |
| Dimensions | 45 mm x 95 mm x 95 mm (H x W x D) |
| Weight | 0.14 kg |
Ensure the proximity probe is installed in accordance with standard Bently Nevada engineering practices. Mount with an appropriate probe gap per system calibration (typically gapped at 1.27 mm or 50 mils against an AISI 4140 steel target for standard 3300 XL systems). Always route the coaxial cable with proper shielding and grounding practices to prevent electrical noise in the vibration monitoring paths. Ensure minimum cable bend radius limits of 25.4 mm (1.0 inch) are respected. Avoid overtightening the probe casing; apply torque up to the recommended 11.2 N-m (100 in-lbf) to prevent damaging thread engagements.
This configuration complies with the following approvals and directives:
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
Implement a 3-SPST switch XOR light circuit in LogixPro or RSLogix 500 using an internal relay bit. Includes truth tables, boolean equations, and verified.
Integrate Allen-Bradley CompactLogix, Caterpillar ATS, and generators into DeltaV DCS over Modbus RTU. Covers ProSoft MVI69-MCM, Miille DIN266 gateways.
ONS instruction fires but the OTE coil never latches in Studio 5000 because the one-shot is only true for one scan. Use OTL/OTU or seal-in logic instead.
Configure Allen-Bradley Kinetix 5500 servo drives on EtherNet/IP. Covers CIP Sync, IEEE 1588 V2 timing, Stratix selection, DLR topology, and HMI.
A moving-average filter is the sliding-window smoother most instrument engineers drop into DCS and PLC analog paths. Here is how the window works, how N and sample time set lag, and when a...
On Frame 5–9 gas turbines, GE Mark VI and Mark VIe run control as function-block application software. This article maps process, protection, and sequencing functions—and what Toolbox ST access...
