Option 00 (0 mm unthreaded length), Option 04 (40 mm case length), and Option 50 (5.0 m total length with FluidLoc cable and connector protector) specify this 3300 XL 8 mm proximity probe configuration — 330103-00-04-50-11-00. This non-contact eddy-current transducer system component is used for shaft vibration, axial position, and speed measurements on rotating machinery. The unarmored design uses an M10 x 1 metric thread and is built specifically with a 5.0-meter overall length, meaning it must pair directly with a 5-meter Proximitor sensor without requiring an intermediate extension cable.
Unlike standard configurations that use basic FEP cables, this variant has a patented FluidLoc cable (Option 11). This construction contains an internal barrier to prevent lubricating oil or other process fluids from leaking out of the machine housing along the inside of the cable. The integrated coaxial ClickLoc connector is supplied pre-fit with a connector protector to prevent environmental contamination and moisture ingress at the connection point.
Typical applications include radial shaft vibration, axial position, phase reference, and speed measurements on industrial machines. It is used on turbines, compressors, pumps, fans, and generators in power generation, water treatment, petrochemical, and heavy industrial facilities where metric-threaded mountings are specified.
| Option Segment | Code on This SKU | Description |
|---|---|---|
| Orderable Part Number | 330103-00-04-50-11-00 | 3300 XL 8 mm Proximity Probe, M10 x 1 thread, without armor |
| A - Unthreaded Length Option | 00 | 0 mm unthreaded length |
| B - Overall Case Length Option | 04 | 40 mm case length |
| C - Total Length Option | 50 | 5.0 meters (16.4 feet) (Use with 5-meter Proximitor sensor only) |
| D - Connector and Cable Option | 11 | Miniature coaxial ClickLoc connector with connector protector, FluidLoc cable |
| E - Agency Approval Option | 00 | Not required |
| Manufacturer | Bently Nevada (Baker Hughes) |
| Part Number / Model | 330103-00-04-50-11-00 |
| Probe Tip Diameter | 8.0 mm |
| Thread Type | M10 x 1 (without armor) |
| Unthreaded Length (Option A) | 0 mm |
| Case Length (Option B) | 40 mm |
| Total Length (Option C) | 5.0 m (16.4 ft) |
| Cable Type (Option D) | 75 Ohm triaxial, FluidLoc oil-barrier cable |
| Connector Type | Gold-plated miniature coaxial ClickLoc connector with protector |
| Tip Material | Polyphenylene sulfide (PPS) |
| Case Material | AISI 303 or 304 stainless steel (SST) |
| Operating Temperature Range | -52 degC to +177 degC |
| Pressure Seal Limit | Differential pressure sealed at probe tip with Viton O-ring |
| Tensile Strength Limit | 330 N (75 lbf) case-to-lead pull strength; 270 N (60 lbf) lead-to-connector pull strength |
| Minimum Cable Bend Radius | 25.4 mm (1.0 in) |
| Dimensions | 17 mm x 17 mm x 5040 mm (H x W x D) |
| Weight | 1.62 kg |
To avoid binding during thread installation, do not exceed the recommended maximum thread engagement length of 15 mm for M10 x 1 probe cases. Apply the standard probe case installation torque of 7.5 N-m (66 in-lbf), and never exceed the maximum rated torque limit of 22.6 N-m (200 in-lbf). Maintain a minimum cable bend radius of 25.4 mm (1.0 in) along all runs. This probe is designed to connect directly to a 5-meter Proximitor sensor without the use of an intermediate extension cable.
This specific configuration (Option 00) does not carry hazardous area agency certifications. It is intended for general-purpose applications and non-classified areas where explosion-proof or intrinsically safe approvals are not required.
Global Express Shipping
Returns & Warranty
Manufacturer: Bently Nevada
Product No.: 330103-00-04-50-11-00
Country of origin:United States
Product Type: 3300 XL 8 mm Proximity Probe
Barcode: 8537101190
Payment: T/T, Western Union
Weight: 1620g
Dimensions: 17 mm x 17 mm x 5040 mm (H x W x D)
Shipping port: Xiamen
Warranty: 12 months
Option 00 (0 mm unthreaded length), Option 04 (40 mm case length), and Option 50 (5.0 m total length with FluidLoc cable and connector protector) specify this 3300 XL 8 mm proximity probe configuration — 330103-00-04-50-11-00. This non-contact eddy-current transducer system component is used for shaft vibration, axial position, and speed measurements on rotating machinery. The unarmored design uses an M10 x 1 metric thread and is built specifically with a 5.0-meter overall length, meaning it must pair directly with a 5-meter Proximitor sensor without requiring an intermediate extension cable.
Unlike standard configurations that use basic FEP cables, this variant has a patented FluidLoc cable (Option 11). This construction contains an internal barrier to prevent lubricating oil or other process fluids from leaking out of the machine housing along the inside of the cable. The integrated coaxial ClickLoc connector is supplied pre-fit with a connector protector to prevent environmental contamination and moisture ingress at the connection point.
Typical applications include radial shaft vibration, axial position, phase reference, and speed measurements on industrial machines. It is used on turbines, compressors, pumps, fans, and generators in power generation, water treatment, petrochemical, and heavy industrial facilities where metric-threaded mountings are specified.
| Option Segment | Code on This SKU | Description |
|---|---|---|
| Orderable Part Number | 330103-00-04-50-11-00 | 3300 XL 8 mm Proximity Probe, M10 x 1 thread, without armor |
| A - Unthreaded Length Option | 00 | 0 mm unthreaded length |
| B - Overall Case Length Option | 04 | 40 mm case length |
| C - Total Length Option | 50 | 5.0 meters (16.4 feet) (Use with 5-meter Proximitor sensor only) |
| D - Connector and Cable Option | 11 | Miniature coaxial ClickLoc connector with connector protector, FluidLoc cable |
| E - Agency Approval Option | 00 | Not required |
| Manufacturer | Bently Nevada (Baker Hughes) |
| Part Number / Model | 330103-00-04-50-11-00 |
| Probe Tip Diameter | 8.0 mm |
| Thread Type | M10 x 1 (without armor) |
| Unthreaded Length (Option A) | 0 mm |
| Case Length (Option B) | 40 mm |
| Total Length (Option C) | 5.0 m (16.4 ft) |
| Cable Type (Option D) | 75 Ohm triaxial, FluidLoc oil-barrier cable |
| Connector Type | Gold-plated miniature coaxial ClickLoc connector with protector |
| Tip Material | Polyphenylene sulfide (PPS) |
| Case Material | AISI 303 or 304 stainless steel (SST) |
| Operating Temperature Range | -52 degC to +177 degC |
| Pressure Seal Limit | Differential pressure sealed at probe tip with Viton O-ring |
| Tensile Strength Limit | 330 N (75 lbf) case-to-lead pull strength; 270 N (60 lbf) lead-to-connector pull strength |
| Minimum Cable Bend Radius | 25.4 mm (1.0 in) |
| Dimensions | 17 mm x 17 mm x 5040 mm (H x W x D) |
| Weight | 1.62 kg |
To avoid binding during thread installation, do not exceed the recommended maximum thread engagement length of 15 mm for M10 x 1 probe cases. Apply the standard probe case installation torque of 7.5 N-m (66 in-lbf), and never exceed the maximum rated torque limit of 22.6 N-m (200 in-lbf). Maintain a minimum cable bend radius of 25.4 mm (1.0 in) along all runs. This probe is designed to connect directly to a 5-meter Proximitor sensor without the use of an intermediate extension cable.
This specific configuration (Option 00) does not carry hazardous area agency certifications. It is intended for general-purpose applications and non-classified areas where explosion-proof or intrinsically safe approvals are not required.
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
Implement a 3-SPST switch XOR light circuit in LogixPro or RSLogix 500 using an internal relay bit. Includes truth tables, boolean equations, and verified.
Integrate Allen-Bradley CompactLogix, Caterpillar ATS, and generators into DeltaV DCS over Modbus RTU. Covers ProSoft MVI69-MCM, Miille DIN266 gateways.
ONS instruction fires but the OTE coil never latches in Studio 5000 because the one-shot is only true for one scan. Use OTL/OTU or seal-in logic instead.
Configure Allen-Bradley Kinetix 5500 servo drives on EtherNet/IP. Covers CIP Sync, IEEE 1588 V2 timing, Stratix selection, DLR topology, and HMI.
A moving-average filter is the sliding-window smoother most instrument engineers drop into DCS and PLC analog paths. Here is how the window works, how N and sample time set lag, and when a...
On Frame 5–9 gas turbines, GE Mark VI and Mark VIe run control as function-block application software. This article maps process, protection, and sequencing functions—and what Toolbox ST access...
