330103-00-08-05-02-00: 3300 XL 8 mm proximity probe with M10 x 1 metric thread (without armor), featuring a 0 mm unthreaded length (Option 00), an 80 mm overall case length (Option 08), a 0.5 meter total cable length (Option 05), a standard miniature ClickLoc coaxial connector (Option 02), and no agency approval requirements (Option 00).
This configuration is unarmored, making it suited for applications where the routing path is protected by conduits or machinery casings, unlike armored variants that provide integral mechanical protection. The 0.5 meter total cable length requires connection to a compatible 3300 XL standard extension cable to achieve a complete 5-meter or 9-meter transducer system. It is used in eddy-current proximity sensor arrangements for non-contacting machinery vibration and axial position measurements.
| Option / Segment | Code on This SKU | Description |
|---|---|---|
| Base Model | 330103 | 3300 XL 8 mm Proximity Probe, M10 x 1 thread, without armor |
| A - Unthreaded Length | 00 | 0 mm unthreaded length |
| B - Overall Case Length | 08 | 80 mm overall case length |
| C - Total Length | 05 | 0.5 meter (1.6 feet) total length |
| D - Connector and Cable-Type | 02 | Miniature coaxial ClickLoc connector, standard cable |
| E - Agency Approval | 00 | No approvals required |
| Parameter | Specification Value |
|---|---|
| Manufacturer | Bently Nevada |
| Model / Part Number | 330103-00-08-05-02-00 |
| Probe Tip Diameter | 8.0 mm (0.31 in) |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 303 or 304 stainless steel (SST) |
| Thread Size | M10 x 1 |
| Armor Type | None (unarmored) |
| Probe Cable Type | 75 Ohm triaxial fluoroethylene propylene (FEP) insulated |
| Minimum Cable Bend Radius | 25.4 mm (1.0 in) |
| Tensile Strength (Maximum Rated) | 330 N (75 lbf) probe case to probe lead; 270 N (60 lbf) probe lead to extension cable connectors |
| Operating and Storage Temperature | -52 degC to +177 degC (-62 degF to +350 degF) |
| Probe Pressure Rating | Designed to seal differential pressure between probe tip and case (exposing probe to temperatures below -34 degC can cause premature seal failure) |
| Dimensions | 15 mm x 15 mm x 500 mm (H x W x D) |
| Weight | 0.15 kg |
| Connection Point | Interface Type | Specification / Torque |
|---|---|---|
| Probe Lead Output | Miniature male coaxial ClickLoc connector | Finger tight connection to 3300 XL standard extension cable |
| Maximum Connector Torque | ClickLoc connection | 0.565 N-m (5 in-lbf) |
Agency Approvals: Option 00 specifies that no approvals are required for this configuration. Standard industrial manufacturing tolerances and limits apply to the physical and electrical design of this probe.
Global Express Shipping
Returns & Warranty
Manufacturer: Bently Nevada
Product No.: 330103-00-08-05-02-00
Country of origin:United States
Product Type: 3300 XL 8 mm Proximity Probe
Barcode: 8537101190
Payment: T/T, Western Union
Weight: 150g
Dimensions: 15 mm x 15 mm x 500 mm (H x W x D)
Shipping port: Xiamen
Warranty: 12 months
330103-00-08-05-02-00: 3300 XL 8 mm proximity probe with M10 x 1 metric thread (without armor), featuring a 0 mm unthreaded length (Option 00), an 80 mm overall case length (Option 08), a 0.5 meter total cable length (Option 05), a standard miniature ClickLoc coaxial connector (Option 02), and no agency approval requirements (Option 00).
This configuration is unarmored, making it suited for applications where the routing path is protected by conduits or machinery casings, unlike armored variants that provide integral mechanical protection. The 0.5 meter total cable length requires connection to a compatible 3300 XL standard extension cable to achieve a complete 5-meter or 9-meter transducer system. It is used in eddy-current proximity sensor arrangements for non-contacting machinery vibration and axial position measurements.
| Option / Segment | Code on This SKU | Description |
|---|---|---|
| Base Model | 330103 | 3300 XL 8 mm Proximity Probe, M10 x 1 thread, without armor |
| A - Unthreaded Length | 00 | 0 mm unthreaded length |
| B - Overall Case Length | 08 | 80 mm overall case length |
| C - Total Length | 05 | 0.5 meter (1.6 feet) total length |
| D - Connector and Cable-Type | 02 | Miniature coaxial ClickLoc connector, standard cable |
| E - Agency Approval | 00 | No approvals required |
| Parameter | Specification Value |
|---|---|
| Manufacturer | Bently Nevada |
| Model / Part Number | 330103-00-08-05-02-00 |
| Probe Tip Diameter | 8.0 mm (0.31 in) |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 303 or 304 stainless steel (SST) |
| Thread Size | M10 x 1 |
| Armor Type | None (unarmored) |
| Probe Cable Type | 75 Ohm triaxial fluoroethylene propylene (FEP) insulated |
| Minimum Cable Bend Radius | 25.4 mm (1.0 in) |
| Tensile Strength (Maximum Rated) | 330 N (75 lbf) probe case to probe lead; 270 N (60 lbf) probe lead to extension cable connectors |
| Operating and Storage Temperature | -52 degC to +177 degC (-62 degF to +350 degF) |
| Probe Pressure Rating | Designed to seal differential pressure between probe tip and case (exposing probe to temperatures below -34 degC can cause premature seal failure) |
| Dimensions | 15 mm x 15 mm x 500 mm (H x W x D) |
| Weight | 0.15 kg |
| Connection Point | Interface Type | Specification / Torque |
|---|---|---|
| Probe Lead Output | Miniature male coaxial ClickLoc connector | Finger tight connection to 3300 XL standard extension cable |
| Maximum Connector Torque | ClickLoc connection | 0.565 N-m (5 in-lbf) |
Agency Approvals: Option 00 specifies that no approvals are required for this configuration. Standard industrial manufacturing tolerances and limits apply to the physical and electrical design of this probe.
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
Implement a 3-SPST switch XOR light circuit in LogixPro or RSLogix 500 using an internal relay bit. Includes truth tables, boolean equations, and verified.
Integrate Allen-Bradley CompactLogix, Caterpillar ATS, and generators into DeltaV DCS over Modbus RTU. Covers ProSoft MVI69-MCM, Miille DIN266 gateways.
ONS instruction fires but the OTE coil never latches in Studio 5000 because the one-shot is only true for one scan. Use OTL/OTU or seal-in logic instead.
Configure Allen-Bradley Kinetix 5500 servo drives on EtherNet/IP. Covers CIP Sync, IEEE 1588 V2 timing, Stratix selection, DLR topology, and HMI.
A moving-average filter is the sliding-window smoother most instrument engineers drop into DCS and PLC analog paths. Here is how the window works, how N and sample time set lag, and when a...
On Frame 5–9 gas turbines, GE Mark VI and Mark VIe run control as function-block application software. This article maps process, protection, and sequencing functions—and what Toolbox ST access...
