Bently Nevada 330130-080-03-05 3300 XL Standard Extension Cable

Description

330130-080-03-05: 3300 XL standard extension cable configuration with an 8.0 m length, integrated FEP-insulated stainless steel armor with a fluorosilicone connector protector, and CSA, ATEX, and IECEx hazardous area approvals.

In contrast to sibling configurations like the unarmored standard cable (Option 00) or non-approved variants (Option 00 for Agency Approval), this particular unit provides mechanical protection against abrasion and physical impacts via its stainless steel armor jacket. The integrated connector protector guards the ClickLoc coax connection against moisture and fluid contamination, making it suitable for hazardous process environments under Option 05 approvals.

Features

• 8.0 meters (26.2 feet) cable length (Option 080) for intermediate distance machinery protection loops.
• Option 03 configuration featuring flexible AISI 302 or 304 stainless steel armor with an outer FEP jacket and fluorosilicone connector protector.
• Option 05 agency approval package covering CSA, ATEX, and IECEx certifications for hazardous zone deployment.
• Gold-plated beryllium copper or brass coaxial "ClickLoc" connectors for secure, corrosion-resistant connections.
• 75 ohm triaxial fluorinated ethylene propylene (FEP) insulated cable construction for signal integrity.
• Standard 25.4 mm (1.0 inch) minimum cable bend radius allows routing in tight machine enclosures.

Applications

Used as an extension link between Bently Nevada 3300 XL 8 mm proximity probes and 3300 XL Proximitor sensors in heavy industrial applications, including:

• Gas and steam turbine shaft vibration monitoring.
• Centrifugal and axial compressor vibration and axial position measurement.
• Cooling tower fan gearboxes and electric motor bearing protection.
• Hydrocarbon pumps, expanders, and industrial gearboxes in hazardous petrochemical facilities.

Ordering Information

Technical Specifications

Installation Guidelines

Ensure reliable signal transmission and protect physical components during installation by following these field engineering rules:

• Maintain a minimum cable bend radius of 25.4 mm (1.0 in) to prevent internal conductor damage or coaxial signal attenuation.
• Always use the integrated fluorosilicone connector protector to guard the ClickLoc connection against fluid contamination and moisture ingress.
• Ensure ClickLoc connectors are finger-tight. If joining an XL connector with a non-XL stainless steel connector, tighten to finger-tight plus 1/8 turn using pliers.
• Do not exceed the maximum rated connector torque of 0.565 Nm (5 in-lbf) during assembly.
• Ensure the combined length of the proximity probe and the extension cable matches the calibrated length of the Proximitor sensor (typically 5.0 meters or 9.0 meters).

Compliance and Certifications

When ordered with the Option 05 approval package, this extension cable is certified for use in hazardous areas when paired with an approved 3300 XL Proximitor system:

• CSA: Class I, Zone 0/1/2, Groups A, B, C, D; Class II, Groups E, F, G; Class III (Intrinsically Safe / Non-Incendive)
• ATEX/IECEx: Ex ia IIC T4/T5 Ga; Ex nA IIC T4/T5 Gc; Zone 0, Zone 2
• RoHS: Compliant with European Union restriction of hazardous substances directives.