Option 16 (non-approved 8 mm probe), Option 15 (1.5-inch standoff adapter), and Option 020 (2.0-inch penetration) specify the 3300 XL configuration of this PROXPAC XL Proximity Transducer — 330880-16-15-020-02-02.
This design combines the 3300 XL 8 mm proximity probe and its associated Proximitor sensor inside a single, unified PPS housing assembly. By combining these components, it eliminates the need for an external extension cable between the probe and Proximitor, as well as the separate housing typically required. Standard field wiring connects directly from the monitor to the PROXPAC housing, simplifying installation in tight or harsh industrial environments.
This integrated transducer assembly is ideal for machinery protection systems where space is constrained and a separate Proximitor housing cannot be accommodated. Common applications include shaft vibration and axial position monitoring on steam turbines, gas turbines, centrifugal compressors, and heavy industrial pumps.
| Option / Segment | Code on This SKU | Description |
|---|---|---|
| Orderable Part Number | 330880-16-15-020-02-02 | PROXPAC XL Proximity Transducer (English version) |
| A - Probe and Approvals | 16 | 3300 XL 8 mm probe without approvals |
| B - Standoff Adapter Length | 15 | 1.5 in (38 mm) standoff adapter (B dimension) |
| C - Probe Penetration Length | 020 | 2.0 in (51 mm) probe penetration (C dimension) |
| D - Fittings Option | 02 | Two 3/4-14 NPT fittings, one plug |
| E - Mounting Thread Option | 02 | 3/4-14 NPT (required if ordering Standoff Adapter Option) |
| Manufacturer | Bently Nevada |
| Model | 330880-16-15-020-02-02 |
| Transducer Type | PROXPAC XL Integrated Proximity Transducer |
| Input Power Requirement | -17.5 Vdc to -26 Vdc (without barriers) at 12 mA maximum |
| Frequency Response | 0 to 10 kHz: +0, -3 dB (with up to 305 metres / 1000 feet of field wiring) |
| Probe Tip Diameter | 8 mm |
| Probe Cable | 1-metre length, 75 Ohm triaxial, FEP insulated with ClickLoc connector |
| Housing Material | Ultraviolet (UV) resistant, glass-reinforced polyphenylene sulfide (PPS) with conductive fibers |
| Sleeve and Retaining Chain Material | AISI 304 stainless steel |
| Outer Sleeve and Retaining Screws | AISI 303 stainless steel |
| Sleeve O-Ring Material | Neoprene |
| Probe Pressure Seal Material | Viton O-ring |
| Environmental Protection Rating | Type 4X and IP66 |
| Operating Temperature (Probe) | -52 to +177 degC (-62 to +351 degF) |
| Operating Temperature (Housing) | -52 to +100 degC (-62 to +212 degF) |
| Minimum Target Size | 15.2 mm (0.6 in) diameter flat target |
| Recommended Shaft Diameter | 76.2 mm (3.0 in) minimum (50.8 mm / 2.0 in absolute minimum) |
To ensure proper electrical insulation and mechanical alignment, mount the assembly securely to the machine case using the 3/4-14 NPT outer sleeve thread. Ground the housing liner using the internal ground plate. When running conduit, prevent water or moisture accumulation by utilizing the supplied 3/4-14 NPT fittings kit and sealing the conduit entry paths appropriately.
The PROXPAC XL proximity transducer assembly meets the following mechanical and electrical standards:
Global Express Shipping
Returns & Warranty
Manufacturer: Bently Nevada
Product No.: 330880-16-15-020-02-02
Country of origin:United States
Product Type: PROXPAC XL Proximity Transducer
Barcode: 8537101190
Payment: T/T, Western Union
Weight: 250g
Dimensions: 60 mm x 110 mm x 110 mm (H x W x D)
Shipping port: Xiamen
Warranty: 12 months
Option 16 (non-approved 8 mm probe), Option 15 (1.5-inch standoff adapter), and Option 020 (2.0-inch penetration) specify the 3300 XL configuration of this PROXPAC XL Proximity Transducer — 330880-16-15-020-02-02.
This design combines the 3300 XL 8 mm proximity probe and its associated Proximitor sensor inside a single, unified PPS housing assembly. By combining these components, it eliminates the need for an external extension cable between the probe and Proximitor, as well as the separate housing typically required. Standard field wiring connects directly from the monitor to the PROXPAC housing, simplifying installation in tight or harsh industrial environments.
This integrated transducer assembly is ideal for machinery protection systems where space is constrained and a separate Proximitor housing cannot be accommodated. Common applications include shaft vibration and axial position monitoring on steam turbines, gas turbines, centrifugal compressors, and heavy industrial pumps.
| Option / Segment | Code on This SKU | Description |
|---|---|---|
| Orderable Part Number | 330880-16-15-020-02-02 | PROXPAC XL Proximity Transducer (English version) |
| A - Probe and Approvals | 16 | 3300 XL 8 mm probe without approvals |
| B - Standoff Adapter Length | 15 | 1.5 in (38 mm) standoff adapter (B dimension) |
| C - Probe Penetration Length | 020 | 2.0 in (51 mm) probe penetration (C dimension) |
| D - Fittings Option | 02 | Two 3/4-14 NPT fittings, one plug |
| E - Mounting Thread Option | 02 | 3/4-14 NPT (required if ordering Standoff Adapter Option) |
| Manufacturer | Bently Nevada |
| Model | 330880-16-15-020-02-02 |
| Transducer Type | PROXPAC XL Integrated Proximity Transducer |
| Input Power Requirement | -17.5 Vdc to -26 Vdc (without barriers) at 12 mA maximum |
| Frequency Response | 0 to 10 kHz: +0, -3 dB (with up to 305 metres / 1000 feet of field wiring) |
| Probe Tip Diameter | 8 mm |
| Probe Cable | 1-metre length, 75 Ohm triaxial, FEP insulated with ClickLoc connector |
| Housing Material | Ultraviolet (UV) resistant, glass-reinforced polyphenylene sulfide (PPS) with conductive fibers |
| Sleeve and Retaining Chain Material | AISI 304 stainless steel |
| Outer Sleeve and Retaining Screws | AISI 303 stainless steel |
| Sleeve O-Ring Material | Neoprene |
| Probe Pressure Seal Material | Viton O-ring |
| Environmental Protection Rating | Type 4X and IP66 |
| Operating Temperature (Probe) | -52 to +177 degC (-62 to +351 degF) |
| Operating Temperature (Housing) | -52 to +100 degC (-62 to +212 degF) |
| Minimum Target Size | 15.2 mm (0.6 in) diameter flat target |
| Recommended Shaft Diameter | 76.2 mm (3.0 in) minimum (50.8 mm / 2.0 in absolute minimum) |
To ensure proper electrical insulation and mechanical alignment, mount the assembly securely to the machine case using the 3/4-14 NPT outer sleeve thread. Ground the housing liner using the internal ground plate. When running conduit, prevent water or moisture accumulation by utilizing the supplied 3/4-14 NPT fittings kit and sealing the conduit entry paths appropriately.
The PROXPAC XL proximity transducer assembly meets the following mechanical and electrical standards:
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
A practical engineering guide to PLC CPU operation, from deterministic scan cycles and I/O image tables to memory, communications, diagnostics, redundancy, processor sizing, and reliable system...
Replacing a 1756-L73 does not automatically mean upgrading its firmware. This guide compares v19.013, v21.011 and v31.011, focusing on project compatibility, HMI communications, legacy networks and...
Implement a 3-SPST switch XOR light circuit in LogixPro or RSLogix 500 using an internal relay bit. Includes truth tables, boolean equations, and verified.
Integrate Allen-Bradley CompactLogix, Caterpillar ATS, and generators into DeltaV DCS over Modbus RTU. Covers ProSoft MVI69-MCM, Miille DIN266 gateways.
ONS instruction fires but the OTE coil never latches in Studio 5000 because the one-shot is only true for one scan. Use OTL/OTU or seal-in logic instead.
Configure Allen-Bradley Kinetix 5500 servo drives on EtherNet/IP. Covers CIP Sync, IEEE 1588 V2 timing, Stratix selection, DLR topology, and HMI.
